Russell Brand who has been decidedly un-woke... now has a line of MeToo types accusing him of shit...

This is the new lawfare. Speak out and they will get you.

On the same day as protesters were trying to blind Tesla employees with a laser.

Sure are nice folks, those mostly-peaceful left!

Sirhr

ZevOZ9 with Holosun 508T Green, Surefire x300 with box and docs for gun. Comes with 2 mags.

Trade Value-$1500

Looking for a full Kidd 10/22 build. Preferably in a Victor Titan or RPG Chassis.

Elcan Specter DR 1/4x FDE 762 - $1800
Great condition, it has a few marks down by the arms levers from my friend cutting zipties off with a knife and adjusting the elevation knob
My friend bought it new for his scar 17 then decided he needed the 1.5/6 version for it instead, so he sold this one to me
he never shot it and I only sighted it in on a 556 gun. its sat in the safe ever since.

Only trades I would consider +/- cash are
Leupold mk5hd 2-10/3.6-18 mil illuminated
Nightforce atacr 1-8/4-16/4-20 mil
nightforce nxs 3.5-15 ffp /2.5-10 mil
armasight sidekick 640
mcmillian xm3 stock
zermatt/bighorn origin/tl3 short action (action only)

34mm
1.44"
20 MOA

Was painted but I stripped 99% of it. No trades. Free shipping

Brand new unopened package.

SOLD

Save a few bucks plus tax and shipping from buying direct.




SOLD

Built this for a nephew and now he wants to just get a legend barrel for his LMT. Less that 150 rounds on it, never shot groups because we just zeroed it with the T1 and sent him in the woods due to limited ammo at the time. No optic or carrier, just upper with the bolt. Receiver is a new BCM and everything else is Wilson Combat. $675 shipped OBO

Everything works as it should. Not interested in parting it out but may be open to selling without the spigot extension. It's nice to have though.

$550 shipped (Paypal F&F)

Comes with
-bipod that has typical minor scuffs here and there from shooting matches
-rubber and spiked feet
-leg extensions
-AREA 419 spigot
-AREA 419 arca clamp

Looking to sell or trade my lightly used MCX 11.5 5.56 upper. Has seen 2 mags.
Comes with Dead Air flash hider and Midwest industries rail.
1300.

Currently setup for an AR with the AR cheek piece. But can easily be run on a chassis that accepts a buffer tube, such as the XLR and some MDT chassis. This will include the buffer tube and castle nut, everything you need to throw it on and go.

Asking $200 shipped to you. SOLD

Vortex Razor HD Gen II, 4.5-27x56 FFP EBR-1C MIL reticle. Sunshade has been machine milled down about 1.5”. Like new condition. One small nick (pictured) by magnification dial.

*Includes*
-Vortex throw lever
-Accuracy 1st bubble level
-Seekins Precision rings

Full power but NOT unlocked RAPTAR. It does NOT have AB. Very little use. Can be unlocked for full power vis/ir/ir illuminator. Includes all original accessories

$3500

Atlas Artemis with around 500 rounds through it. It comes with the brass grip panels, soft case, 2-140mm mags (if legal in your area)

$7250 shipped to your FFL

Hornady 6.5 Creedmoor brass .

Great condition Exodus believe its Impact cut but was running a TL3. Light version with cutouts in cheekpiece and buttstock. Will come with brass weights as well as Hawkins M5 BM and Foundation full length rail.

$1100 shipped via check/MO

2 mounts. Sp 4001 and sp 4001-c. $350 each
Rings. Sr 4000. $300

All are in excellent condition and no box included. Prices are shipped with PayPal f&f

Excellent condition, all accessories included.

$500 shipped
Zelle for payment

Hello All,

Myself and a coworker are changing out our Colt 6920's into pistols or possibly the SBR route. I doubt very seriously I will ever run a suppressor, but he is saying he might eventually. He is leaning on me to help him as he has never built an AR or has much armorer experience. Not that I am an expert (hence me being here) but I have built a few and help maintain a few guns for folks. Any helpful suggestions would be appreciated. We are trying to make the lightest weight rifles possible. Budget friendly would be great, but I am aware sometimes you have to "pay to play".

I have picked out the BCM Lightweight Fluted 11.5" barrel for us. Should I lean him towards 12.5" if he is wanting to go suppressed at some point?

Also, does this BCM Barrel ever even come in stock? Because I am beginning to wonder... So what are some alternatives we should consider? Ballistic Advantage? Roscoe?

Ideally all we are trying to change is the barrel, the rail, and the stock. Keeping everything else for now as we move down the road. Speaking of rails. I was under the impression a barrel nut had to be used with the specific rail or the D ring. I am guessing this isn't always the case?

They won't be used for anything realistically outside of 100 yards. We are wanting these for "SHTF/Truck Gun's" to replace our longer rifle that's a burden to us getting in our of trucks an UTVS with.

We will be running red dots with maybe magnifiers.

I believe that's all the information I could give to everyone to try and get some insight. If I missed something please let me know.

Any information would be greatly appreciated. Thanks

Have a Vortex 30% off cert that expires in a couple of weeks. I don't have a use for it.

$100

Hey guys just shooting this combo l made from parts for the first time today. Had trouble cycling. After looking at it a bunch l noticed this bolt has what looks like an m16 style extractor. All the ar9s I've seen just have the fingerstyle extractor in the lower. So unless I'm missing something I have both. Does any of you know anything about this? Are my observations correct or am I missing something?

How is the Begera BXR? Is it just a better Ruger 10/22? I am Wondering how the action is because I see them from Time to time and I have two 9 year olds who use my ruger american .22, I am trying to see if it would be lightweight enough for them or should I just look at ruger 10/22? I am teaching my kids on a bolt action first mainly so they do not shoot spray and prey like some of my friends teens do when they going shooting with their parents.

Hey as anybody dealt with a store in CA called Street gunbroker
Looking to buy a rifle off there website don't knowif they are for

My Browning X-Bolt Max Varmint/Target is zeroed at 100yds. To hit zero at 25yds I want to holdover because I want to retain the 100yd zero for shooting 625yds at Pala shooting range. Upon firing the rifle at 25yds indoors the point of impact is 1.50 inches low as measured by calipers. So knowing that 1MIL is 3.6 inches at 100yds that means at 25yds 1MIL would be 1/4 of 3.6 inches or .9 inches. To move the point of impact 1.50 inches up, doing the math says I would need to holdover about 1.7 MILS which would mathematically be 1.53 inches which is as close as I can get to 1.50 inches. However, It takes a holdover of exactly 2.0MILS to hit dead center at 25yds. We all know that 2.0 MILS at 25yds is exactly 1.8 inches which is 0.3 inches more than 1.50 inches. What is going on here?????
Here is the 100yd target with red bullseye and the 25yd target showing point of impact of crosshairs and 2.0MILS holdover.
My question to the cognoscenti is WTF????

Brand new scopes. I bought these for my son and I, but decided to upgrade us ZCO 8-40's instead. One is still factory sealed, and the other is brand new. Opened and looked through, but never seen the outdoors. These are the illuminated versions. Excellent scopes, but obviously not ZCOs. The one that was opened also has the full size windage knob so I assume they both do.

$1150 EACH shipped and insured via Paypal F&F, Venmo, or Zelle.


View attachment IMG_0775.jpeg

Selling my extra 7.5" ultrasound. $65 shipped.

Staccato P DLC threaded barrel with Dawson 509t plate. Unfired with 2 126mm mags, as new. Pl350 not included.

$2650

Staccato c2 dpo
About 1k rounds through it. 6 black coated 120mm mags, tactical slim magwell, sro/rmr and dpp plate/hardware included. Frame is brand new(to fix finish blem) and slide and all small parts have been recoated in dlc. It hasn’t been carried or fired since.

$2100