Leupold Mark 5HD 5-25x56 with PR2 MIL reticle. Unused open box. ZERO issues or marks. Has all original covers, sunshade, manuals and tools. $1800 OBO

Badger mount is the condition one with 20MOA and 34MM $250 OBO

A little late but love this event.

Login to view embedded media

I have 6 Larue MBTs (all sold), 2 Geissele SSAs, and 1 Geissele SSA-E for sale. The MBTs have never been used to my knowledge (these came out of my dad's spare parts pile). The Geisseles were removed from factory guns that had them installed and may have been fired a little, but no more than 100 rounds or so.

MBT-2S $80 shipped each
Geissele SSAs $150 shipped each $120 each or $200 for both.
Not interested in any trades.
I'd consider trading for an Area419 Hellfire Ti 30 cal brake, Berger 7mm 180 gr Hybrids, or Berger 30 cal 230 gr Hybrids.

ALL SOLD

Hey Everyone,

For those that use Imperial dry neck lube (the graphite with ceramic beads) when loading for precision, when are you applying it in your process? I've been dipping the neck in the dry neck lube before sizing the case (hopefully to reduce run/out friction from the expander ball). Then after I've trimmed, chamfer/deburred, and primed, I have been dipping the neck in the dry lube AGAIN before seating the bullet (I guess for a consistent seat?) .. Are y'all dry lubing before both of these steps? Or just once during the sizing and calling it good? Not sure whether I'm over lubing the neck, if that's even a thing?

I'll be switching to a separate expander die/mandrel soon, but the same question goes, would you dry lube before expanding the neck AND seating the bullet.

Curious your thoughts from all you experienced hand loaders. Thanks!

WTS 338 pieces of 1x fired Lapua LRP 6.5 Creedmoor brass all from the same lot of Berger factory ammo, all fired from my bolt action. $285/shipped.

One of the best 384 thermals to ever surface the market in my opinion. It’s about 7 months old , never registered but still has warranty, comes with all box and docs. One small blemish on flip open lens cap, does not affect the unit as that’s a replaceable item. I’m a dealer and this was my “buddy” gun. 1800$ to your door.

The wife has taken a liking of cartoonizing my guns. Is there anyone on here that would want their gats Cartoonized for sticker purposes or whatever? She’s running out of mine to animate

Hawkins DBM , It’s in excellent shape with an arca rail, and metal bottom. Had a aero short action 6.5 SAUM in it with Sendero profile barrel.

Separating the 2 and wanting to sell each. 1000$ shipped with metal bottom and screws included.

Only trade is a HNT 26 non folder in 700 SA or LA.

Got this gun from a member on here, it shoots 1/2 with factory frontier ammo, I’ve enjoyed it but do not use it as much as i thought. Approx 17 rounds down the pipe. Gun was built by straight jacket armory , Aero action, carbon barrel, have a flush HS mag and extended magpul, manners stock, triggertech trig, 2800$ to your door with ep5 optic mounted. 2300$ without.

Will entertain trades for other bolt guns in a magnum cartridge, i like chassis guns.

SOLD

Hornady 338 Lapua 285 gr ELD-M Factory Loaded ammo #823300

$70.00 per box plus actual shipping. That is $3.50 per round.

I have 2 cases all same lot. That is 12 boxes of 20 in each box. Buy both cases and I will sell for $3.00 per round at a total of $720 plus shipping.

Contact me with address for shipping. I will beat the best shipped price on ammo seek by a large margin to move these.

Selling this scope as i dont use it anymore.

A few small scratches on the outside but glass is great. No original box.


Mil/ ballistic reticle

1600$ shipped

Only a matter of time before your daughters belong to Rome. Literally tyrant pedos running around the White House.
I was under the impression that the second amendment was reserved for cases of kings/tyrants like this.



Login to view embedded media

In excellent condition, slight signs of use if you look really hard but only hunted with a few times. $ is TYD via Venmo/PayPal. Ships USPS or UPS Insured with tracking.

Leupold Mark 5HD 7-35x56 PR2 MIL - Includes original caps, box, manual, and sunshade. $1850 $1775 $1725 $1675

Hawkins 35mm Heavy Tactical Rings 1.15” Height - $150

Take both for $1950 $1875 $1825 $1775!

Got this in trade and was going to use it but I like my 4.5-18 and going to stick with that.

$1125 shipped.

MPA Ultra lite chassis. Short action, Right hand in flat dark earth. Includes action screws. $550 shipped. PayPal FF or Venmo.

Hey guys got a KRG W3 Pro. Used it for the NRLH open heavy setup and was amazing. Just want to do open light next year. Great shape no issues.

$1000 shipped and insured.

For sale is an excellent condition Athlon Ares ETR 4.5-30x56. Purchased new and used briefly (approx 200 rounds of bench work).

Asking $675 shipped (no rings) or $750 SOLD with the Vortex Precision matched rings pictured. Paypal F&F or Venmo accepted.

Zero compromise 4x20 MPCT 1 reticle. Condition is perfect it’s off my Vudoo 22lr which didn’t see much use overall. Comes mounted with AREA 419 1.53 height mount with diving board and level. Also comes with a spare Spuhr mount with Raptor mount and Flatline OPs level. The box the Spuhr comes in will say it 1.18 height but it is also 1.5 height .

Edited to Add: Elevation is non locking and I am sure you saw it comes with a Tenebraex ARD as well

Price SOLD shipping on me in CONUS

PayPal FF or G&S you pick up the charge for G&S. You welcome to send a check but will have to wait to clear

Thanks

Looking for a set of 6.5 saum dies. Preferably Redding. Let me know what ya have thanks.

Internal weight kit for sale. Comes with what is pictured for weights and hardware. $140 Tyd.

Up for sale is 3 used AI AX Short Action Chassis for the Rem 700 footprint.

#1 - 16" 13" Fore end tube, Excellent Condition $1,750 (5.6 lbs)- Milled to accept the Impact Trigger Hanger $1,650 Shipped *SOLD*

#2 - Fore end 16" tube (5.4 lbs), Excellent Condition $1,650 *SOLD*

#3 - Standard Fore end 13" tube Milled out for an Impact trigger hanger (5.4 lbs). Has marks in the recoil lug recess from someones oversize lug. More used than the above 2. $1,600 Shipped *SOLD*

Looking for a TVC-22i. Let me know what you have.

After reading countless glowing reviews, I just purchased my first Tangent Theta 5-25 with the Gen 3 XR reticle. I own half a dozen Nightforce ATACR scopes with Tremor 3 and Mil XT reticles. Perhaps it is just me, but I find the Gen 3 XR reticle almost unusable below 12x. It simply becomes too small. Above 12x it is great all the way to 25x. The Nightforce 5-25 is usable throughout the entire magnification range. The Nightforce 7-35 is good from 7- 30 before the reticle becomes a bit too thick. The TT diopter locking knob feels cheap, the windage and elevation markings are too small, and the parallax knob is too stiff. Frankly, while the glass is superb, it is not noticeably better than the ATACR glass unless you make a massive effort to discern a difference. Better eye box is the one feature that is obviously better than the NF scopes. Overall, the Nightforce ATACR scopes seem much more robust. While I realize that Tangent Theta scopes are considered the top alpha scope, for $5k and up, I am not particularly impressed. Who am I? I'm just an ordinary former Marine 8541 (1984-1992) long range shooting and reloading enthusiast. I'm returning the TT to EuroOptic. I have a ZCO 4-20 on order and have high hopes that it will best my Nightforce scopes. We shall see.

I have a 30-06 I put together with a Remington 700 action, has a 26” tube heavy barrel 1-10 twist.

I’ve got some 190 grain Berger VLD hunting bullets and 208 grain ELDMS I’ve got 99 rounds of fired formed Norma brass that has been annealed, cleaned, sized, ran threw expander mandrel for consistent neck tension etc chamfered and deburred.

I have staball 6.5, H4350 and H4831SC powders on hand and during fire forming the staball 6.5 was able to push the 190 grain Berger to 2820-2840 with no pressure sings but nothing was consistent. I would group in the .3s and have good SD and ES and load the exact same charge again to confirm and it would be all over the place. Not sure if that’s just from the new brass I was firing or the nature of ball powders. I know the h4350 is a great powder as I run it in 2 of my other rifles, I’ve never tried the h4831. Hoping to at least get 2700-2800 the goal is to just shoot paper right now and eventually go out to 1000 yards. Maybe shoot a deer with the vld hunting bullets.

Which powder would you start with to conserve components?

Looking for an Auto Throw Housing for a AutoTrickler V3. Would like the last version.
If you have one sitting around, PM me directly with price and photos.
Thanks