SOLD

Athlon Helos BTR Gen2 2-12x42
Specifications in attached pictures.
Used but good condition.
No ring marks but some scratches on tube.
I have the box but no paperwork.
It's used, price reflect this.

$old
PayPal F&F, Venmo or Zelle for Payment.

Basically brand new canik tti combat. I bought this pistol with intentions for starting shooting local uspsa matches to discover that I don’t have the free time like I thought I did. I bought this right when canik released this model and shot maybe 30-50 rounds and it has sat since. I cleaned it and put it back in its box and now I’m just trying to clean out my safe a little. I hate that I didn’t get to use it much but hopefully you will enjoy it and get plenty of fun. Asking $800 cashapp, Venmo, Zelle, PayPal f&f. It will ship from my ffl to yours. Located in Huntsville AL.

Looking at 2 AR-10s in 308. The SP10 and the Wilson Combat Super Sniper. I get LE discount so price is the sameish. GAP and the SP10M are out of my price range for this set up. Wont be a high volume gun. Familiar with both products in AR15. The 1/10 twist in the Wilson is attractive and I own a Wilson Combat Franken build. This will be a buy once cry once. Only going to be used for 600 yard steel and maybe a club comp.

WTS: new accurate mag aics 5rd 308 mag. Its new. Came with a rifle and never used

$50 shipped conus

PayPal f&f or Zelle

WTS: new accurate mag aics 3rd short action magnum mag. Its new. Came with a rifle and never used

$50 shipped conus

PayPal f&f or Zelle

I already have have a C236 NXS - 5.5-22x56mm scope w a MOA NPR1 reticle, I bought in 2012 for use on a Savage .308 bolt rifle build. I have a new build Savage Bolt rifle in a XLR chassis in 6.5 CM that needs a proper scope, and have been considering either another NXS or instead, a NX8 4x32x50mm MOAR F1 C624. I don't want to consider the additional cost of a high end ATACR scope, even w my vet discount.

I live in AZ so have access to Ben Avery range and can shoot 300yds at the benchrest range or out to 1000 yrds, although I usually visit a friends place in NM where his range goes out to 1250+ yds w steel targets. I shoot occasionally and for fun, due to many broken bones and injuries. Using my NXS, the glass has been more than sufficient to meet my needs, even with old eyes, and I typically shoot in full daylight, although occasionally before sunset at the range in NM
1. Is the glass on the NX8 comparable to that of the NXS?
2. what will I loose if I go with the NX8 w the 50mm objective vs the NXS w 56mm?
3. is the current NXS inventory comparable to a 2012 manufactured NXS scope in terms of quality and most importantly glass?
4. is the NXS being discontinued and why?

I appreciate your help, and additional thoughts. TIA.

A couple items for sale. PM with questions. Paypal F&F preferred, but other discrete options possible.

1. McMillan Game Warden 2.0 for Tikka. Inlet for CTR bottom metal and Proof Sendero barrel. Molded In Camo, Carbon edge fill. Weighs under 32oz. Excellent condition. SOLD
2. Tikka CTR Bottom Metal and Action Screws - $50
3. 2 qty Tikka CTR (308, 6.5) Mags - SOLD

The stock and bottom metal for $575.

Inherited my grandfathers old dies. More sets than I can count.

There is a set of Redding dies in 223 that I have use for. Appears to be a fl sizer and seater.

One is marked 223 rem ST E8 and the other is marked 223 rem FL K8. I’m assuming the FL K8 is the full length sizer, but what is K8?

What’s a durable and accurate chronograph? I can’t afford a top dollar upper end chronographs. Looking for a dependable and reasonably priced unit. Your pros and cons on the graphs will be helpful. Thanks

Sold
High quality

Precision underground bag- sold

Ftw bag -sold

Thunderbird set gite lite fill -sold.
never used
Good for a lite wieght hunting bags
ATTACH type="full"]8580402[/ATTACH]

Selling a new/unfired Tisas Night Stalker DS 9mm

I just picked this gun up last week and I love the feel of it. Barrel is tight at lock up, Frame is about as tight as my MPA DS9 and tighter than my Kimber TLE II, so I have no complaints about it. Trigger is good with little to no creep after take up. I bought this gun before I realized that the Tisas Duty DS was optics ready. The Duty is the model that I really wanted (I want black color and the front slide serrations), so I'm selling this at a loss to try and move it. This comes with the original box and accessories as well as two - 17rd Magazines. Don't try and buy this if you can't have those in your state.

Asking $650 shipped from my FFL to yours CONUS. Prefer zelle, or USPS money order. Cross Posted and for sale locally.
I would be willing to consider a trade if you have a new or very good condition Tisas Duty DS 9mm.
If I don't sell it I'll just deal with the grey color.

If you want to see something specific on the gun or confirm I'm not scamming you, let's schedule a video call so you can see that I actually have the gun!
Thanks
R

Have any of yall used the Xero on a diving board? I shoot off a tripod a lot and have been looking at options for mounting the Xero to get some data. The instructions say to position 5-15 inches to the side of the muzzle and 5-15 inches behind the muzzle. By that logic the diving board wouldn’t work, curious what yall have to say.

Right now I’m between the diving board mount and a side mount that clamps to the Arca rail.

WTS 16” Q Fix 8.6 Blk barrel with cherry bomb.

less than 100 rounds fired.

$350

Text (512)635-3899 for pictures

I have a Colt 6920 AR15 that has the .169" trigger and hammer pins and has the stock Mil-Spec trigger assembly.
This rifle has been setting in my safe for years and is new and unfired.
I was getting it cleaned up and ready to use today and I noticed that the hammer pin rotates when moving the hammer and also the trigger pin slightly rotates when pulling the trigger.
It is my understanding that both the hammer and trigger pins have grooves that the springs engage in to prevent them from walking out. But should the pins be rotating? Like I said this is a new rifle unfired.
Also I noticed the pins can be slightly moved side to side with finger pressure. Is this normal?
Thanks

Just looking for opinions. Looking for a cheap to reload for plinking cartridge that maybe isn't .223rem since I already have a couple in an AR.
Plinking from 1-400 max. More like 1-200 yards because that's what the range i got to has. Somthing to shoot with friends or shoot while another rifle cools down.

Was thinking maybe a 6x45 slinging some 70grain sierras.

Any other options out there. What do you fellas use for such activities?

Holosun DRS-TH Thermal Weapon Sight. Bought thinking it was what I wanted and now trying to get back into a longer range thermal. Mounted momentarily on an AR and then taken off and put back in box. Asking $1500 plus shipping and insurance.
Thanks,
Daniel
Trades welcome just depends on what it is. Really looking for an AGM Adder.

(7) 100ct Boxes [Lot: 2574]

Is there any recent data/experience out there on the 7mm Creedmoor? All of the information I have found is a couple of years old, I’m curious if it’s no longer talked about because of better options of some other reason.
I recently bought a Fix by Q, purpose of the rifle for me is hunting and just an all around fun rifle to shoot. No comps with this rifle. Having said that I’m stuck in the confines of a sr25 pattern magazine. Seems like the 7mm Creedmoor shooting 162’s would be the perfect option.

Thoughts?

Also reamer recommendations?

Thanks

Does anybody know what these holes are on the front of the press? I tried Forster today but they were closed. I wanted to shorten up the swing and thought I would put a bolt threw there and be able to screw up jaw opening screw and it works pretty good. Shortened arm swing up quite a bit.

Defiance Elite custom serial number
Proof Research Steel Comp Contour 1-7.5 tw 26.25" 125 rounds on it. Spun up by Matt Yore at Sawtooth Rifles.
Trigger Tech Special
Thread adapter-no muzzle brake.
$2k shipped to your FFL insured
Trades for SLC 15x56 or Ziess RF 10x54
IM for offers
v/r
Scott

Looking for an XLR 4.0 magnesium for a Remington/clone SA
Would also take one for a tikka

Hello everyone,

Does anyone have any experience with the RAINER ARMS ULTRAMATCH MOD 2 6.5 CREEDMOOR BARREL?

I have noticed my trimmer is leaving fragments of brass trimming in the case. How vital is this to get it all out before seating?

It's getting interesting out there.