Brand new never used Vudoo 12rnd metal mag . Bought this a few years ago thinking I was going to do the NRL 22 thing. Never did and it's just been sitting in my reloading room. Never been used . First to PM me gets it. $90

Hello everyone, my name is Reuben. I’m 40 year old Transmission builder, father of six. I recently picked up a CVA scout take down v2 and 300 blackout. I’ve made some hand loads and shot some factory subsonics, but I cannot get this gun to group better than 1.5 inches at 50 yards. Sometimes not even that good. I’m hoping somebody in here has had the same experience and can point me in the right direction. Let me know where to post this in the forum. Thank you.

Hey all! I'm looking to see if anyone has a FoxPro Krakatoa II that they want to sell. If so, shoot me a PM. Thanks!

I have a Leupold Mark8 in good condition. Looking to either sell or trade. Sale price $2800 trade value $3000. Looking for a thermal optic or anything unique!

Manners L/A LRH - Black Carbon High Gloss

- 700 L/A foot print
-Mini Chassis
-New
-Sendero barrel channel
-Fits M5 long action bottom metal
-Left side flush cups
-4”pic rail
-High Gloss clear coat

Asking $1095 - No trades

Selling 6 GT brass and 6 GT die set together. The used MatchMaster FL 6mm GT RCBS match die set (RCBS #32308- no bushings) in excellent condition. The 397 pieces of 6mm GT brass were all purchased new, and all were shot out of one known Proof barrel at 2,850 fps. Selling all brass and match die set together for only $440 OBO shipped. Payment can be credit card, PayPal, or Venmo.

The brass is a combination of both 6 GT Alpha and Hornady GAP in the following condition for nearly 400 rounds. Alpha brass shot one time x 73 pieces. Alpha brass shot two times and has been annealed and sized x 90 pieces. Hornady GAP brass shot two times x 125 pieces. Hornay GAP brass shot two times that is annealed and sized x 65 pieces. Hornady GAP brass shot three times annealed, sized and trimmed to SAAMI specification x 44 pieces.

Prefer selling all at once but would separate out with die set $160 shipped or the brass $320 shipped or best offer.

Direct message us any questions and still available if posted. Thank you

Whidden Click-Adjustable, Full Length Bushing Sizing die, Micrometer Seating Die, and Bump Gauge. .286 Bushing included. $200 CONUS


Trim-It-II Trimmer with 6.5 creedmoor die. This mircrometer adjustable 3-way case trimmer features interchangeable dies and an adjustable cutter, allowing you to trim, chamfer and deburr virtually any caliber. Barely used with original box and instructions, $125 CONUS


Berger LRHT Bullets, 153.5gr, 152ct (box says 500, only 152 left), Lot 2061. $70 CONUS


Hornady LRP Brass, 466 ct total: 242ct 3x fired, cleaned, annealed and sized. 244ct 4x fired, deprimed. $140 total CONUS

Used aimpoint comp m2 with ARD works as it should no issues.

-XLR Envy PRO 700 SA in White Battle Worn Cerakote. Has 2x Envy Pro Internal Weights, Bag Rider, Thumb Rest, Long Brass Arca Extension, Long Night Vision Mount and Weibad Mini Stock Pad. ($1500 as configured). PRICE DROP: $900 SOLD.

-3x AICS Mags (1x 10rd Accurate Mag, 1x 5rd Accurate Mag, 1x 10rd Magpul). PRICE DROP: $120.

-Barreled action is sold. TBAC bipod not for sale. Prices include shipping and insurance on me. Zelle or PP F&F. US50 only. Cross posted.

WTT newish factory takeoff single stage for factory 2 stage.

I have a new condition LaRue Tactical upper receiver in 6.5 Grendel. This is for an upper receiver only. Receiver is in like new condition. Only has 10-20 rds through it. Basically verified function then it went into storage. Comes complete with changing handle and BCG (both from LaRue). Barrel is 18” with a 1/7 twist. Asking $1000 shipped. PM for additional pics or questions.

Additional info in the link below:

BNIB Pure Precision M5 bottom metal

$100 shipped
I take Apple Pay, Venmo, Zelle, Cash App.
F&F Payments only.

Running .223 rem with 75 elds.

On a loaded round , outside neck diameter is .248”.

After sizing (.247” bushing), my outside neck diameter is .246”. Then I run a .223” (actually measured at .223”) mandrel. The outside neck diameter is then .247”, but if I measure the inside neck diameter, I have .222”.

Is this considered .001 or .002” neck tension? Bullet diameter is .224.

Any suggestions?
Starline brass, annealed every firing.

Sold sold

NEW White Oak Armament 16" Stainless steel 223 wylde 7 twist , mid gas , SPR contour for Mk12 builds . Threaded 1/2-28. Waited awhile for it but never used it.
No Trades Needed , pics on request .
Sold sold $275 shipped zelle or PPFF

Good Morning Y’all!

Just shooting out a new member greeting from New Mexico. Hope everyone has a great weekend and thanks for letting me join the “club” and learn from you all.

For sale:

1. Sitka Equinox Pants 34R, optifade elevated II. Pretty sure I never wore these once in the woods. Essentially new without tags. $150

2. Kuiu Kenai jacket (no hood) Valo, Large. Great condition. Just doing more static hunting these days. This is better for active hunts in cold weather. $125

3. Sitka Fanatic Hoodie, optifade elevated II, large. Excellent shape. Cool hoodie with ninja mask. $100.

New with tags Kuiu pro pant 34 vias camo — 170

New with tags Sitka ascent pant 34L — 125

Kifaru LP parka size L (Kryptek highlander; discontinued) — 300

LP pants Kryptek highlander size L; discontinued) — 260

Northstar gloves L — 90

New with tags Kuiu peloton 118 shirt long sleeve medium - 65

All prices shipped conus.

Feel free to ask questions.

Have a couple extra barrels so looking for another TL2 to slap them on. Let me know what you have I have an extra 308 bolt head so not worried about that.

Sold

Up for sale, CZ Scorpion 3 evo s1, hbi trigger and charging handle, Magpul grip/mag release. A3T hinge and brace adapter. Will come with standard muzzle device and 1 30 round mag if legal where you are. Cost was around $1200, asking $850 shipped in the lower 48 (not CA or Massachusetts etc where laws prohibit) without red dot. Add $200 if you want the MRO with it. I accept PayPal ff or usps money orders only. Additional shipping insurance on buyer’s cost/option.

For sale is one of the nicest awm's you will ever come across and a true collector piece. This is a 1997 that was imported in 1999. Serial 97SM4501 with all mumbers matching. The rifle is a 1.5 300wm and has fired 60 rounds. It has the optional pic rail and fluted barrel. It is the older/ rarer welded chassis not the pin and bond. The rifle is flawless. It has perfect fitting skins from before the molds were junk. It sits in the original super rare aluminum transit case. All other accessories are all original ( bipod, mags, sling, cleaning kit, correct 1 port brake). Optic setup is a spuhr 4601 and nf atacr 7-35. Small parts also with it ( killflash, quick adjust thumb screws for cheek piece, rubber bipod feet covers). Asking $16000 plus shipping. Please message me with any other questions

Anyone have a ARC flat breech tenon Proof Carbon in 6.5 Creedmoor?

Thanks.

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.


Sold

Unopened still in the wrapper. Moving to the 174gr eld VT. $215 shipped OBO. PayPal F&F or Venmo is fine.

7 boxes of 100 175gr .308 Berger VLD Hunting.....$350 $300 shipped
6 boxes of 100 140gr 6.5 Hornady Amax.....$185 shipped throw in a 7th partial box, around 60 SOLD
1 box of 100 140gr 6.5 VLD Target.....$45 shipped SOLD

For sale used Cortina Precision EC Tuner Muzzle Brake 5/8x24 thread, 6.5mm size

Price: $150.00 shipped

I accept paypal friends and family and USPS Postal Money Orders. Please see feedback many happy customers. No trades.

nib XLR Envy Pro, Short Action, in Tequila Sunrise, folder, C-6 stock, ergo grip, bag ryder, thumb rest.

$950 shipped

Zelle, Venmo, USPS MO or Bank Draft
No Trades Please