Excellent condition. Glass is pristine. Comes with everything as when purchased new plus caps for both ocular and objective lenses. $SOLD shipped conus. Not looking for any trades at this time. Thanks.

I have a Leupold VX3i-LRP FFP MOA scope for sale. $600 with the rings and bubble level. It has been a great scope, I just switched everything over to MILS finally. I’ve used this in PRS matches as well as hunting and it never let me down. Open to trades if you have something interesting

Selling a used Burris XTR 2 5-25x50 scope in FDE with the SCR MIL reticle and MIL turrets. Bought it used but decided it was too much magnification for my application.

$500 shipped.

Recently at ALTUS I was connecting with a silhouette at 1039 yards. (According to my range finder). Tricking a ballistic calculator to give me midrange trajectories, I noted that the bullet traveled 70 yards between 112.22 and 112.25 inches above line of sight with a maximum height of 112.59 inches. (Between 540 and 610 yards)

Knowing the effects of negative G’s (having done so while piloting to watch my pencil float) I am wondering if the time when the bullet sets at the top of its trajectory and starts downward towards the flight if it experienced loss of weight, (weightlessness) without obviously loss of mass.

Maybe not a comparison, but felines finish their jump just past the top of the apogee to have a negative weight and thus silent landing.

Note to trick a ballistic calculator to give midrange trajectories, set the range you are shooting to the “zero range”.

Original owner with under 100 rounds down the barrel.
Shoots factory 140 match very well and my Berger 140 loads are under .5”

I bedded the action with acraglass as it wasn’t shooting like I wanted out of the box and that instantly made a difference in this rifle.
Some of the factory paint chipped off in the process and I just went over it with some dark gray paint. You can see it in the pictures.

I added the following:
MDT 20 moa rail ($70)
Trigger tech special 2 stage flat trigger ($250)
Sawtooth rifles arca rail made for the ridgeback. ($109)

Bipod not included. Pricing well below what I paid for just the rifle new. Great rig but I hardly use it and not worth it to just sit in the safe.

$1550 shipped to your ffl.

No trades.

Used but good shape. Comes with the exomtngear pouch.

$190tyd

Looking to see what transferable machine guns are out there for sale

browning m2 is at the top of the list

But let me know what you have

size small yoke. some minor piling on the back. otherwise no signs of use

310 shipped

2500

everything is new. all parts are lmt
trigger is lmt 2 stage axle-euro. saftey works with hammer fired.
barrel is not torqued.

atlas bipod

Mike got back to me and is unfortunately no longer making bore guides at this point in time. What else is out there I should grab? I've got an Impact Precision 737r on order and a barrel chambered in 6.5mm CM, and a Pro-Shot cleaning rod. (22-26/42").

I've seen the 21st Century: http://www.xxicsi.com/bore-guide.html
Sinclair models: https://www.sinclairintl.com/gun-cleaning/rod-guides-bore-guides/index.htm
I've had a Possum Hollow but he no longer responds email or answers the phone and his VM is full (I'm over it, no thanks on these)
Bruno: https://www.brunoshooters.com/product/81006.html

Not sure what to go with for my setup, so any suggestions would be welcome.

Looking for a right hand, SA AXSR Chassis. FDE or Black is fine.
Let me know!

6mm creedmoor barrel 600 rounds throw it 26” for Mac bros evo 2
325 shipped
No action already sold it
Also have some Lapua 1’s fired brass (dirty) if interested as well

Looking TO TRADE FOR a 6mm creed barreled action of similar or greater value. Can add cash.


MUST FIT REMINGTON 700 SA foot print chassis.

247 pieces of Hornady 1x fired brass. All brass was fired from the same rifle. All brass was from Hornady 147 ELD-M factory ammo. All brass has been deprimed.

$125 shipped

No trades at this time.

The handguard is on TIGHT on my Armalite AR-10. I'm beginning to wonder if the barrel nut and handguard are a single unit. I'll call Glen at Armalite Monday.

The guard seems to be all aluminum.



The upper receiver block I received is not doing the job and I'm afraid that if I tighten it enough, I'll damage the upper.

So it looks as though I need two tools: a reaction rod (as recommended by several people), and a bigger wrench.

I looked for alternatives to the $200 Geissele rod and found these two (click to view):

Midwest Industries Upper Receiver Rod .308

AR-10 308 Reaction Bar and Barrel Vice Block Rod Tool, Blue

While I like the price on the second one, I think it's aluminum and not up for heavy stress. The one from Midwest Industries appears to be the better choice.

Thoughts?

What wrench is recommended? The strap wrench I have slips when I really apply force.

I appreciate your recommendations for the two tools. I would prefer to not have to send the assembly back to the gunsmith who built this.

Richard

$old shipped
Buttstock cover is painted

Selling my Seekins HIT and the barrels / bolt faces with it.

Will post additional pictures shortly just wanted to get the post up.

I bought this with plans to customer a stock for it, which changed to buying the new Seekins M3 stock for it. Unfortunately, Seekins has informed me the old HIT action does not drop into the new M3 stock, so I’m just going to sell it. I was also informed my barrels are compatible with the new M3 action though so those can be used either way. That being said I’d rather sell it all and just move to a different platform.

Rifle purchased last summer from EuroOptic. Has installed the HIT PRO ARCA rail and NVM bridge. Also has A419 bolt knob adapter and American Rifle Company round bolt knob. Trigger was swapped out for a Geissele Super 700 but a single stage trigger tech will be included. Hard to find Geissele trigger can be included for an additional $300.

Asking $1,500 with choice of 1 Seekins Factory barrel and the appropriate bolt face. Additional barrels $500 each unless otherwise noted.

I have the following barrels for it, all brand new I fired.

Seekins Factory Pre-Fits:
24” 308 win M24
24” 6.5 CM M24
24” 6 CM M24
24” 6 GT M24
24” 6.5 PRC M24
18” 223 WYLDE

Aftermarket Barrels

16.5” Carbon Six 308 1:8 - $725

This is for the rifle only no additional parts/accessories included.

Selling AXSR S/A Accuracy International chassis.

AXSR S/A chassis. Over all good shape, has been use a bit also, has some scratches, shown in pictures…. Asking 1500$ Shipped, Continental US.

trades interested in, List below..

1)SAC Nexsus Press
2)Primal Rights Comp Primer Seater
3)Henderson Precision Gen3 powered case trimmer

I have a m70 in 7wsm and was kicking around the idea of rebarreling as it’s at the end of its life. I was wondering what cartridge options I had to choose from. I was hoping the 6.5 SAUM was a choice as adg is making brass for it and I love the adg brass I’ve been running in my 300 wm. But looking forward to hearing my options. Hopefully I have this in the correct forum.

Leofoto-362C inverted tripod. Comes with a YB-75LK head.

(Little hand in full tripod picture not included)

The price is $550 shipped to the lower 48.

For sale is a ODG ceracoted V7 pro. Rifle shoots bug holes with anything quality and shoots shitty ammo pretty dang good, lol. Really consistent shooter. Will ship with original muzzle device. Asking $1200 shipped.

Brand New. Got it off a prize table for a friend who ended up not wanting it.

$550 shipped.

Great condition. Used at a few matches. NL Pure 12x42

SOLD

Currently have 3 cans (2 direct thread for bolt guns, the KAC mounts easily on the standard muzzle device) so I've never bought any QD hub, but now find myself in need of one. Any input would be appreciated Thanks

Selling my older style ARC QD-L Mount. 30mm rings, 1.5” high, 20 moa

$110 shipped
PayPal F&F, Venmo or Zelle