I have a fried who has the above put doesn't know what a fair price would be. Any suggestions would be appreciated. Here's the information he gave me. Picture to follow.
What's a fair price for my LaRue Tactical 556 OBR SBR is worth? Optic, suppressor and light not included. It does have a Surefire WarComp flash hider and Troy backup iron sights. It has 1500 rounds thru it.
Login to view embedded media

Anyone having issues seeing photos?

I've tried multiple mobile (Android and iOS )and computer (Mac and pc) without any luck. Both signed in, signed out, and incognito.

When you click where an image should be, it says: image cannot be loaded.

The Madness / Nov. 2024 streaming Netflix, mini series
mystery/crime/drama . It is fairly well done, a little loose sometimes predictable sometimes not . Acting is solid. Did touch on some good points of rampant controlling linked influence of Media, Social media, Bot farms .
-

Trailer
-

I have a brand new never fired Osprey carbon .223 quick change barrel 1:7 twist 16.5” long. 1/2x28 muzzle thread. It was chambered by PVA.
Comes with brand new terminus Zues .223 bolt. Asking $1,300 for everything.

Willing to sell the barrel without the bolt but
I will not sell the bolt without the barrel.

Dillon 550 Setup.
Comes with what’s pictured
4 conversion kits 9mm, 38, 40, and 45
Extra tool head
Stand
Brass bin
Bullet tray
Large and small priming system
1 large and 1 small primer pickup tubes
Cover

$850 Shipped

Terminus Zeus QC action

26” proof 6mm dasher prefit from element industries with some extra chambering work done.

Triggertech diamond

KRG whiskey 3 chassis with folding stock, enclosed forend, full length arca rail, 2 sets grips

This rifle shoots extremely well. I’ve got a load developed for it that puts up 10rd 1/2” group with a 5.5SD (I will provide load data with sell)

Only selling to get into an AI ATX

$3650 shipped

Morning all,

I just picked up a lightly used Remington 700 .223 with 16.5" barrel for cheap...and even cheaper after the 25% off I got at Cabela's yesterday! Of course, I'm ditching the Hogue oversold stock and putting it in something a bit dressier. This will be used almost exclusively for range use and steel.

I've narrowed my search down to the KRG Bravo and the MDT Field Stock. I'm trying to figure out which one has the shorter fore-end given the stubbiness of the barrel. Can anyone who owns these give me a measurement from the front edge of the recoil lug to the tip of the stock? So far, my exhaustive internet sleuthing suggests the KRG is the shorter of the two but I can't find actual specs anywhere to prove that.

Thanks and Merry Christmas.

New goodie for the Optics Bridge. The Riser Extension. Here is the description from my website and some pictures as well.

Link -> https://mcleodprecision.com/products/riser-extension-for-optics-bridge

Also note that I will be packaging the Optics Bridge, Kestrel Holder, Wind Flag Pro, ARCA clamp and Riser Extension together into a single bundle for the holiday season. Turnkey kit. Put it on the Christmas list. Join my mailing list or follow me on the hide to get notified when it is available. I expect on or before Black Friday and the package will have a discount vs buying all components seperately. Pics below of the complete setup.

About the Riser Extension:



When I am sitting behind glass for 2 days on my tripod with the Optics Bridge, I notice that you have to lean forward a small amount to clear the 2 tripod legs. Small amount and small issue, but after 2 days of it, it does get annoying.

The Riser Extension allows you to move the clamp backwards 1.65". This small amount does not adversely affect the balance much and does fix the vertical alignment eliminating the need to lean in slightly. Two of us ran it for a full 2 day match and it worked out great.



The Riser Extension can also be turned 90 degrees so it is inline with the Optics Bridge and becomes a riser to help your clamp screw clear the base of the Optics Bridge. See photo for a visual and that knob in the photo is 0.8" diameter for reference.


Another scenario is mounting scopes or small spotters on the Optics Bridge. The Riser Extension can be oriented forward to shift weight in that direction, if need be.

The Riser Extension is for the Optics Bridge only. It is double sided presenting alternate mounting options with 1/4-20 counter sunk center holes and standard ARMS17 1.1" 10-32 threaded hole pattern. Comes with hardware to mount to the Optics Bridge. Weight is 2.5 ounces and is machined from 6061-T6 here in the USA.

All other related products seen here can be found at this link to my website -> https://mcleodprecision.com/

Any questions, please reach out to [email protected] or DM me here. Thanks everyone.

I’m looking to build off a Tikka action. Would I be further ahead to just buy a new rifle and take the action out or try to find and buy the action only?
I only found J&A to sell Tikka actions. Anyone else out there?
And when you find an individual selling a Tikka action, they are gone in a blink of an eye.
I would need the magnum bolt face as I’m building a .300WSM.
Is there another decent company out there where I can get an action for $800ish. The closest I found was Origin (closer to$1000)by Zermatt and I already have the TL3 in a 6.5 PRC which is great, but looking to go lighter in weight and cheaper$$$ build.

Any input, suggestions, information or criticism is appreciated. Thanks!

I have 2 unopened boxes of berger 6mm 105 vld hunting bullets. Only interested in trading for berger 6mm 108 gain elite hunters. Straight trade 2 boxes for 2 boxes we pay our own shipping cost.

I don't care what lot # the 108s are in not that good of a shooter. I built my load with the 108s so I'd rather just have all the same bullet, that's the only reason to get rid of these.

Selling a practically new accurized ar pro trigger made by ballistic engineering. Only used for one range session. Trigger is fantastic I’m just going to part out the rifle it was in. Asking $120 shipped. I only accept Venmo

Used for less than 50 rounds. Decided to build a proper Mk12 withe correct barrel and suppressor so I won’t need this. Worked great for me. $150

Benchmade Bedlam Auto 8600SBK- Never cut/carried. Blade is factory sharp. There is a slight imperfection on one side of the blade, but the picture makes it look more obvious than it actually is. Other than this, knife is like new with a snappy action. Comes as pictured with Benchmade pouch but I tossed the box long ago.

***SOLD***Asking $350 shipped OBO

Like new without box Sig Romeo X Pro, non enclosed. This is the circle dot, dot, or just circle reticle version. Comes with screws to mount to a P320 and mounts to similar pistol with DPP footprint. Comes with tools to mount and zero the optic.

Price is $250 $220 $190 shipped. PayPal F&F (no comments!) or Cashapp accepted.

Looking for a staccato c2 optics ready model. Thanks!

So, my lapua dasher brass got its first annealing on an AMP annealer after 3 firings. The same lot of bullets, primers, powder, same powder charge, same exact seating depth. I had about 40 rounds left over from the 2x fired brass. Those still group 1 hole. the annealed brass is shooting about .75-1 moa. Of course, i figure this out 1 day before leaving for a match. I would use my barrel tuner to dial in the groups again but then i'd be dipping into my rounds i need for the match. Thank god i have an option. Threw my 6.5cm barrel on the AI, zeroed the berger 140 hybrid ammo, and its shooting 1 hole as usual. I hate not being able to shoot my dasher but oh well.

Has anyone else experienced this? i found a thread on Accurate Shooter that seemed like someone else has experienced this. The conclusion was, i need to play with the seating depth to tune it back in, then after a couple firings, the original seating depth will work again.

This .223 Match build is geared towards PRS but would be right at home in F-Class.

Origin SA, Competition Bolt
Proof Competition, TL3 (HLR Lug) @ 26"
M5 Bottom Metal
Triggertech Diamond, Flat
Custom Maple Stock
DNT 7-35x56 Mil
$3000, shipped to FFL
$2600 w/out optic and rings

(Accutac bipod not included)


100 yard sight in with 80.5gr Berger over 23.7gr of AR-COMP @ 2931fps

3-shot group on steel at 500, ~0.1mil group (pardon the cell phone picture through the scope, not easy to get a clear image)

Is anyone still producing a lawton 8000 inlet stock or chassis?

anyone else not able to upload pics?

MDT Ckye Pod PRS length with BTC clamp (both pic & arca rail friendly), comes with spiked and the rubber feet.

MRI-C with co-witness riser. $350

300 rounds of Sig V-Crown Defensive JHP 45 Auto (45 ACP) ammo. 185, 200, and 230 gn available. $20 per box, $10 shipping. $280 shipped for the whole lot.
Login to view embedded media

To protect themselves from the rabid Trump supporters.

"I am thinking about carrying every day, said Ashley Parten, 38, a Douglasville, Georgia, resident who purchased stun guns for herself, her daughter and three nieces after the election. Parten, who is Black and bisexual, is also eyeing a maroon handgun that she plans on buying after taking a firearms class."


"...A few days after Trump’s first presidential win in November 2016, Parten said she was filling up with gas in Charleston, South Carolina, when a white man in a red Maga hat shoved her against the pump. She says she elbowed the man and then drove off. He told me that my N-word president couldn’t protect me any more, because it was Trump country,” she recalled."

This is a takeoff from the Savage Elite Precision, ACC chassis (MDT) that will fit the 110 action spacing (short action).

It's gently used and looks new. There's an issue with uploading pics but if you send me a message, I'll text you pics until the upload feature is fixed
PayPal or Venmo please.

New, hasn't been worn. Bought for an elk hunt that didn't happen.

Guide Jacket - L ($165) SOLD
Guide Pants - 32 ($115)
Pro Merino 200 - L ($90)