$85 each or $250 for all 3-sold

NEW Geissele 2 Stage (G2S) Trigger for AR15/AR10 Part# 05-145 $110 Shipped in the CONUS.

Bought this for a build and went with a single stage instead. This is brand new in the factory packaging.

• The Geissele 2 Stage (G2S) was designed to be a high quality, cost effective alternative to the SSA.
• It is a 4.5 lb. non-adjustable precision combat two-stage trigger and allows precise and accurate trigger control.
• The G2S is manufactured from the same tool steel as the SSA.
• Visually, from the outside of the weapon there is no difference from the SSA and the feel and reliability is the same.
• The G2S Trigger will lighten the trigger pull relative to a standard trigger.
• This lightened trigger pull will make the firearm easier to discharge.
• 

4 port MBM 5/8-24 thread. I believe it's 30cal but can't remember for sure. Used on my 25CM. $90 shipped

PayPal preferred. Extremely tight schedule right now but I'm sure I can have the wife drop off to get shipped.
Thanks

Been reading about the C&H Mercury recoil reducer and just wondering has anyone tried it and does it really work? Sounds like an easy way to tame my 30 06 for my grandson. All comments are welcome, thanks.

Trybe Defense aluminum chassis for Remington 700 short action and clones. Accepts aics magazines. Comes with action screws, $125 shipped.

Selling my Barrett MRAD 338LM/300WM rifle!!

Barrett MRAD
338LM and 300WM
26” barrel
SPUHR SP-4003B Mount
Schmidt Bender 12-50x56mm PMII FFP .25 P4F-MOA Reticle
Honeycomb sunshade
Atlas bipod w/ claw feet
B&T Accushot monopod
US Optics rail mounted bubble level BBL-300
Both 338LM and 300WM barrels and bolt kits
Monolithic upper receiver
Full-length picatinny top rail with built-in taper
User-changeable barrel system
Fully adjustable match-grade trigger
Folding stock
Tool-less LOP and cheek height adjustment
Ambidextrous paddle-style magazine release
Rare bronze finish
$12,000 Build

Looking for $9000

GPO Centuri 20-60x85 Spotting Scope Bundle

If you're looking for a fantastic deal on a quality full sized spotting scope, this deal at only $599.99, is too good to pass up. This 20-60x85mm spotting scope is impressive. It comes with a full size carbon fiber tripod and a zip on-off case,

Discover the world like never before with the all-new CENTURI 20-60x85mm bundle. This complete package includes everything you need for your outdoor adventures. Equipped with a premium, full-sized yet lightweight carbon fiber tripod and a convenient zip-on/off Cordura case, it’s designed for grab-and-go exploration. The spotting scope features a high-quality optical lens system with high-transmission glass and GPO’s exclusive GPObright coatings for exceptional clarity. Built with a durable magnesium body, brass gear helical focus, sliding sunshade, and rugged rubber armor, this spotting scope is truly a once-in-a-lifetime piece of equipment.

Magnification 20x-60x
FOV @ 1000y 45' to 17'
Objective Diameter 85mm
Length 12.6in
Weight 29.3 oz

For detailed images of the kit contents just CLICK HERE

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

New in Box Vector X (12x-DMR)
Just recently picked up here on the forum from Sendero_Man, no longer needing this 12x, open box pristine.

$2650 shipped

Venmo Zelle or Certified Bank Funds

No Trades Please

I'm selling my Giraud Annealer. It is in perfect working condition.
It comes with the .223, .308, and magnum cartridge wheels.

$450 (buyer pays shipping)

PayPal FF or you pay the fees for G&S

No Trades

PM if interested

2 Accuracy International AICS 10 round Short Action magazines.

$SOLD Shipped

PayPal Accepted

For sale, CZ 457, Mueller works barrel[thermal fitted] 419 15moa mount, Manners TCS stock w/Sikes rail, Timney trigger, L3I bottom metal, 4x mags, full weighted 419 arca rail. Around 3000 rds, 1 hole rifle w/lapua long range. Supremely accurate, just got out of 22.
$2400 shipped to FFL

$4k shipped. I currently have 3. So I am looking to offload one of them. Comes with everything it came with from L3Harris.

Mounted and zero’d, but hasn’t really been used yet.

$4k shipped. No trades.

16” M89 Broadsword upper with surefire brake, 20ish rounds down barrel

$1000 shipped

DM for pics

200 rds, same lot. Loaded with 140 hybrids.
These have always shot amazing in any of my creed barrels. Match worthy.

$395 Shipped

I'm considering investing in magnum / big bore muzzle break & a suppressor for a few projects ( 300 RUM / 300 NM with ELR in mind).

Over the last few years I've standardised all my muzzle thread to 5/8" 24 tpi.

But for large caliber, long heavy barrel ( 28" - 30" - 32" ?) I'm wondering if it is not too small? A 3/4" 24 tpi would have more meat?

I already have a 7/8" 24tpi on my 33XC, but options are limited in that size.

Any thoughts or experiences to share on this topic?

Question for the Hidemind,

I want to build a 223 trainer setup like my 6.5 CM - impact action in an MDT chassis with 28” MTU contour barrel.

My smith stocks 1-7 twist brux barrels and his 223 reamer’s freebore is somewhere in the 0.100 / 0.125 range (he has to confirm exact dimension with me).

The thing is, I will be shooting factory ammo for the forseeable future. So no rounds longer than SAAMI length at least for now.

Who has experience with this much jump and factory ammo? Am I shooting myself in the foot?

69 and 77 SMKs loaded by whomever are on the menu, and maybe some factory loaded bergers.

Thanks fellas.

Vortex Razor HD Gen III 1-10x24 FFP MRAD in stock $2,499.99


Package deals! https://cstactical.com/package-deals/

Both web and mobile browser versions of the Hide have the "filters" option on forums but not the mobile app. Will the app get that feature anytime soon?

So my RCBS Universal Primer finally gave up last night. I am looking for a bench primer to replace it. I don't want to spend primal rights money but want something that is going to be consistent and quality. I was looking at the Forster bench primer last night but don't know if there is something better.

I'm totally new to long range shooting and building a 6.5 creedmoor bolt gun. Currently have a Zermatt Arms Origin, Proof Research stainless barrel, and TT Diamond trigger. I don't really have anywhere to shoot out past 250 yards at the moment but want to add a long range bolt gun to the collection and take a class or two this year. I don't want to spend a fortune but will go up to around $2000 if I need to. Would rather stay between $1000 - $1500.

I really like the Athlon APRS6 reticle for some reason. I think because the windage/elevation is .2mil from the center dot and it doesn't seem as "cluttered". But again, I don't really know what I'm looking for in this type of scope. It has Japanese glass and seems to really punch above it's weight class. But it's not a Vortex or NF.

I've also looked at the following:

NF NX8 4-32- seems like a good, not great, option at the price point?
Burris XTR Pro- don't like the + in the SCR2 reticle
Vortex G2 Razor - old and I think there are potentially better options at this price point
Vortex Viper PST 5-25- it's not a Razor and only 25x
Zeiss LRP S3- magnification goes the opposite way. lol
Tract Toric- seems like a higher priced Cronus

Any reason to not go with the Cronus at around $1100 for my first PRS-type bolt gun build? Or are there any other options I'm missing?

Thanks!

Brand new in the box Leupold MK4HD 8-32x56 PR3 reticle. $sold shipped or trade for Nightforce NX8 2.5-20

Decided I wanted to have the extra parts for the Co-Ax handy for when I am swapping jaws or to hold the priming attachments. Threw this together in Fusion 360 and designed it to mount on the two holes behind the press on the Inline Fab mount I use, but would pretty easily be mounted on something else.

Will share the file if anyone is interested.

I have two of these and want to upgrade one of them to something nicer like a Dan Wesson Specialist, which would be the only possible trade. Good condition, a couple small scratches, just cleaned at my gunsmith and both springs replaced. Shoots like a dream. Comes with one mag which I forgot to photo cause I didnt sleep last night.

$750 TYFFL Or FTF in Oklahoma

Have a Blackout Defense Keymo Hybrid Brake and Flash Hider, Raw Heat Treated finish. Both NIB. Bought for a build I never completed. Unopened. 1/2-28 threads. $100 each.

Cut and bedded for badger
$650