Was shopping bulk ammo on the Wilson Combat website when I saw their claim that suppressors will cause brass-cased ammo to corrode so quickly and severely that it will be difficult to extract the cartridge within 48 hours. I don't know how else to say it. . . I'm skeptical. Seems like if this was really a thing, the armed forces would have switched entirely to nickel-plated cases or would have some strict guidance on not allowing a live round to remain in the chamber of a suppressed weapon for more than a few hours after the weapon was fired. But my first suppressor is still in jail, so what do I know?

Here's their claim and a photo posted on their site to back up the claim:
"Cartridges shown HERE were left in the chamber of a suppressed weapon for 48 hours after firing 5 previous rapid fire shots. Note the dramatic difference the corrosive effect of hot chamber ammonia has on a brass case compared to a nickel plated case. The nickel plated case extracted easily while the brass case was stuck in the chamber and was hard to extract."



So you're telling me. . . that in an otherwise clean gun with a suppressor, if I burn through 5 rounds rapid fire, and leave the sixth round chambered, that in 48 hours it's going to look like it was fished out of the lake from a boating accident years before?

Selling my recently picked up PSR/MSR Chassis

Brand new old buy, never used.

All hardware comes included, top rail, handguard, stock, screws.

$3200 - SOLD!!!!!

Price drop

Login to view embedded media

I have the following 2 lots for sale:

-547 bullets, 6mm 103gr VTTAC Vapor Trails (Lot 3728) - Price: 200 bucks, shipped to your door. SOLD!

-694 bullets, 22cal 88gr Hornady ELD-Ms (Lot 2212228, bulk packaging) - Price: 180 bucks, shipped to your door. SOLD!

I'm having issues uploading pictures, but, DM me and we can exchange phone numbers and I can message you the pictures.

Acceptable payment methods are PPFF, Venmo & Cash App.

WTS - A419 Funnel Kit - old version with full base and one long handle. DM for photos. SH has error when loading.

$75 shipped.

I am cleaning out my closets of things I no longer use or need. I hope some of you can use it.

My prices include USPS Shipping to your door. Here is the list

Eberlestock Scope cover and crown protector - Brand new and never used outdoors. It is khaki or pale brown. $75



Sunrise Tactical - Tactical Tripod Bag With Molle Gen 2. Color is black and it is 28" long. It fits my RRS TFCT34 with Anvil. It is in very good shape with no tears or abrasions. The zipper works perfectly. Price is $115



Wiebad 1.5" Duty belt - It is black in color and size 40. I wore it once when I received it. It is too big for me. I replaced it with a smaller one and think it is a great belt. Price is $50



Traust rear bag - Never used like new condition. These had a cult following for a while. OD Green and priced at $45 SOLD



Precision Underground ELR Rear Bag - Black Multicam color. Used a little, but in great shape with no tears or abrasions. Pretty heavy fill, but not sure which fill they used - Price is $60 SOLD



Armageddon Gear Clutch rear bag set - This is a bag originally designed by Reasor Precision. The color is multicam. It is really useful for a variety of shooting situations. Each bag can be used separately or snapped together. Each bag uses heavy fill. The condition is excellent. The price is $85.



The OG gamechanger made by Reasor Precision. The bag that started it all. It is multicam in color and uses a pretty heavy fill. It is in excellent condition. The price is $75. SOLD



Feel free to make offers. I'll consider them all and thanks for looking

Hey all,

Started my 10-day waiting today when FedEx delivered to my FFL, and I went in to get the paperwork done. Unboxed and checked it out, and what a good looking stock in person!

But, one thing I noticed that was a bit concerning is that the barrel isn't concentric on the forestock groove; it's obvious, and a bit annoying. Could something have shifted in transit? The barrel and stock don't touch, slid a sheet a paper all the way down no problem. But why wouldn't there be better centering of the barrel and stock?

I was unfortunately in a hurry - FFL is 30 min from home, and I had to get there and back in time to go to Christmas Eve mass. Anything I should examine more closely when I return in 10 days?

Thanks and Merry Christmas / Happy Hanukkah,
Chris

So I have an 8lb jug of H4350 and I love short bolt guns. I was thinking of building a 16" 6.5PRC and was wondering if the faster burn rate of H4350 would do well in a shorter barrel with 130HVLD. I'm sure it would be a no go with 147 ELDM but I do have quite a bit of those left from my last 6.5CM shorty. Anyone have any good data on that powder and a short PRC?

For sale is an Athlon Helos BTR Gen 2 2-12x42mm with the AHMR2 FFP illuminated reticle. This scope is in like-new condition (mounted but never used) and includes the original packaging along with a set of Butler Creek lens caps.

$350 shipped. I am not interested in trade offers at this time. SOLD!!!

Photos will be posted once the forum is fixed; in the meantime, PM me with your phone # and I'll text them.

Not about Alec Balwin, he skated.

I have 2 of the Remington 700 jeweled bolt stainless actions (both now proudly sporting PVA barrels. I noticed on the rear of one some very light, what I would call 'browning, or pre rust', like a very light discoloration to the finish. I'm wondering if there is a cure for that. Since @bohem is the metal man, perhaps he could chirp in. Mine is like the one below but not nearly as bad, just a small dime sized spot that you wouldnt notice if you werent looking. I was considering buying the one below but this has me a bit concerned. Is there a way to clean it up.

Wilcox Vs RHNO II
Need to know which is a better solution to mount a china skeet with a JAMR. Would use the dovetail adapter on the RHNO II. Thanks.

Bruce Bower Warsaw IN just getting in the long range shooting

I have a atlas bt-10 the legs are very noisy. Has anyone else had an issue, and were you able to quiet them down?

Used but still in good shape. Don’t have the MPA chassis anymore

SOLD$ shipped

Great rings, just moved to the area 419 mount and don’t need these. 100$ shipped

I did this once before, and I liked it so much I decided to make another. I love this little rifle!

Custom 6 ARC WLVRN

Lightly used MDT mags with spacer for BR variants. (2) 10 rd mags. 12 rdr is sold. $120 shipped for the 10 rd mags.

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer. Trade? What do you have?

Primary Arms SLx 3X MicroPrism™ Scope - Green Illuminated ACSS Raptor Reticle - 5.56 / .308 - Yard with an ADM QD 1.93 height mount and Primary Arms Kill Flash, Has the box and all of the items and mounts that it comes with. NEW - $OLD​

Beautiful condition 504-T 22lr shoots lights out with standard cci ammo I can provide target pictures!

Has a couple mods
-Arca rail
-Threaded barrel

Will include the scope if you want it

$800 shipped will trade for a scope or other firearms that peak my interest

This is for a Foundation Centurion for Vudoo22. Comes with arca rail, bottom metal, and butt has been lightened for better balance. Can ship (will cover half the shipping costs and insurance with buyer), or local pickup in Dallas Tx area. Am asking $900 (+shipping mentioned) or $850 local pickup. No trades at this time. Feel free to email me at [email protected]

Just finished my first rifle build, 22 creed on a kelbly nanook action, proof 22” sendero contour, alpine hunter stock, trigger tech diamond. I ordered 100 alpha brass and a set of redding bushing dies. I bedded the action with gray marine tex. I plan on shooting Berger 75 grain vld’s with H4350 for coyote and groundhog and just plinking. Should I fireform 50 of them before getting serious with load development? I don’t have a mandrel or any way to expand the necks. I couldn’t wait to shoot it so I loaded up 10 rounds with 39gr powder and .020” jump and got a couple 3/4” five shot groups. What’s everyone else doing with new brass before load development? Am I overthinking it?

Does the process (how it is chambered/Crowned) dictate how a good lot of ammo performs? and I am speaking using quality match ammo(Lapua, Eley, RWS, Norma Match)

Been making ammo for years on an old Lee Kit press. Looking for a little better consistency, or areas to upgrade my reloading room.

Will I notice a difference in upgrading from the Lee to the MEC Marksman?

Mainly loading 6BR for PRS and 243 for coyotes.

Just looking for input. Thanks!

Trex offset deltapoint pro mount $50 SOLD

Koeng co t2 adapter and spacer for Leupold mount $45 SOLD

Arc m brace 36mm mount with level diving board and accessory rail $225

Open to trades

Selling two AEMS core setups

1. Comes with standard mount and box. -$200 shipped

2. Comes with standard and low mount, no box. -$200 shipped.

Great setups but now they're extras an unused. Would trade both for a PST II 1-6, XPS or Aimpoint.