Your AXMC barreled are M30 thread pitch
Your AX barrels are M27 thread pitch
What happened to your foam on your AX comb? Hoptic makes one that was made for that gun. Looks wet cleaner and fits like a glove. It’s called a saddle blanket: see below
Your AX barrels are M27 thread pitch
What happened to your foam on your AX comb? Hoptic makes one that was made for that gun. Looks wet cleaner and fits like a glove. It’s called a saddle blanket: see below
I had emailed Tony at MK Machining @Tyler Kemp about a magazine extension for the AXSR 308 pattern magazines. I'm not entirely sure if the magazine is capable of accepting an extension, but I'm going to be sending mag in for a prototype as soon as I hear back from Tony for the go-ahead.
Just curious how many would be interested in an extension for the AXSR 308 mags. I would like a +4 but would be satisfied with a +2.
Just curious how many would be interested in an extension for the AXSR 308 mags. I would like a +4 but would be satisfied with a +2.
Last edited:
Just be sure to get the sensitivity right or it will drive you a little batty. Closing the bolt can cause it to trigger the radar if you have the sensitivity to high. Which can be a pain when you're in prone and behind your scope and now you have to "reset" the radar.
What setting do you have yours at? I had mine at the highest setting and just about any kind of movement will set it off.
It’s not this exact one but pretty much the same thing.
Two Vets 55mm Dual Tension QR Ballhead
Two Vets 55mm Dual Tension QR Ballhead - Two Vets Tripods - The 55mm dual tension ballhead has become increasingly popular since launching. This ballhead features dual adjustment having a large knob for coarse adjustment and a smaller knob for fine adjustment.
www.scopedout.com.au
It is done. I have a 7-35 ATACR with the MIL-XT reticle on order.
Welp...decided on an optic. Might paint my barreled action purple to fit between the creamy peanutbutter and this crunchy peanutbutter.
Elite iron spigot came in today and waiting on a nice new Cal g2 to slap on there. Been a bit since I used anything but a harris after my displeasure with the v8 and psr.
Elite iron spigot came in today and waiting on a nice new Cal g2 to slap on there. Been a bit since I used anything but a harris after my displeasure with the v8 and psr.
Some more blue magic today. Got a couple of new mags from @Scott Seigmund and my AT-X hasn't had a single hiccup feeding 
Nice day today, a bit breezy though.. Still can't beat another day at the range!
This has about 50 rounds though it now, impressive groups with a basic loading of 140 ELDM and H4350.
Nice day today, a bit breezy though.. Still can't beat another day at the range!
This has about 50 rounds though it now, impressive groups with a basic loading of 140 ELDM and H4350.
What’s your load for that. I just started shooting some 140 ELDM’s as well. Using 41.5 H4350 just finished settling in the barrel so gonna see how it groups now but so far it’s running right at 2750.Some more blue magic today. Got a couple of new mags from @Scott Seigmund and my AT-X hasn't had a single hiccup feeding
Nice day today, a bit breezy though.. Still can't beat another day at the range!
This has about 50 rounds though it now, impressive groups with a basic loading of 140 ELDM and H4350.
View attachment 7855521
View attachment 7855524
View attachment 7855525
Just picked out of a hat, maybe some input from other's here...
41 grains of H4350 and CCI 200 primers
I was trying to duplicate factory loadings.
41 grains of H4350 and CCI 200 primers
I was trying to duplicate factory loadings.
You’re not supposed to dig up potatoes with it, dummy.
From Norway, Vision buttstock replacement is complete.
I will follow up with Christian in Norway, I’ll see where he’s at with the production version buttstock. @BLKWLFK9 will be getting his buttstock to test soon.
Still waiting on the AT/AX compatible grip panels as well, sorry for the delay.
Mine is getting painted up all Purdy today and tomorrow.
Inquiring mind wants to know how many AI shooters here have changed their barrel using the trademarked Bynum Sledge and Cressent method?
Probably not many. All the newer Gen rifles with Quick Loc can swap barrels by hand without tools, and not too many guys are shooting 10,000 rounds of 308 a year with their AWs like Jacob does.
I believe the cerakote code you are looking for is h327
What are my mag options for the AT, besides the AT mags from MH?
And a bit of a small update; I ended up going a different direction scope wise over the NF 7-35…
And a bit of a small update; I ended up going a different direction scope wise over the NF 7-35…
Uh. AT mags.
I know some people have had success modifying MDT AICS mags to work with AI's. I don't see being worth it how ever.
Hopefully you got something good like a Counter Sniper?
I know some people have had success modifying MDT AICS mags to work with AI's. I don't see being worth it how ever.
Hopefully you got something good like a Counter Sniper?
AW mags (not AX unless it’s an AT-X).
There’s not really much point in trying to make anything else work. The rifle is literally designed with AW mags.
Perfect. Sounds like youre ready to take out the bad guys at 2 miles with a 308
That thing needs to be taken out back and shot by a factory AW
