Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Offer valid until 9/23! If you have an annual subscription on Sniper's Hide, subscribe below and you'll be refunded the difference.
SubscribeThe v2 doesn't have the ejector wire anymore. If you don't see what looks like part of a paperclip inside the receiver near the top of the mag well, yours is a v2.I received a LH T1X about 60 days ago. How would I know if it a v2? Or since the LH versions were so late arriving, maybe they had the ejector issue resolved already?
Thanks!The v2 doesn't have the ejector wire anymore. If you don't see what looks like part of a paperclip inside the receiver near the top of the mag well, yours is a v2.
Area419 30MOAWhat scope base are folks using / recommending for the T1X?
The ejector is part of the mag well but you can't just drop it in. The bolt on the v2 is narrower on the bottom, so would require machining to convert.Anybody know if the v2 ejector parts are/will be available? Nothing showing @tikka website.
My only complaint with the T1x is the crappy ejection.
Sure would be great to find out that it's been fixed. Thanks for any help.
I have one with the newer ejector. So far it’s awesome, I never had the old style Ainu have no idea if it’s as accurate or not.Anyone try out the gen 2 T1x? Curious if the rifle and barrel are just as accurate as before but with the ejector modification
Mine does.mdt xrs for the tikk1 t1x - does it still use the standard factory tikka magazines?
mdt xrs for the tikk1 t1x - does it still use the standard factory tikka magazines?
Does anyone know if there is a MLok pic rail that extends out from an Oryx chassis under the barrel like some of the Arca rails do? I hope I have explained it correctly, but I am wanting to get my bipod out further under the barrel to put some weights on the chassis and under the forearm is the only place I can put them but I need to extend my rail or find one that can mount and have the length to go under my barrel. Thanks.
Area 419 would be the first place I looked - Cyber Monday Sale is still on for a couple more hoursAnyone know of a full length Arca rail that is weighted that will fit the Oryx chassis? The one MDT has is not in stock and I don’t believe it’s weighted. Thanks.
Since it’s still in my clipboard, I ended up with 0.97” rings for a 50mm over a 25 MOA DIP rail with flip caps. Fingers crossed for when it all arrives.What’s the lowest scope rings you can use with the 419 30 MOA with a 42mm objective? I’m gonna run a Swfa 10x on my t1x. I have some Swfa low rings I’m not using that are .80 and maybe a set of low Seekins that are .82
Hello,Another question if anyone can answer.
Will this cheek riser work for a T1x?
Matthews fabrication check riser .125”
I know these are somewhat universal but just wanted to make sure if anyone uses this or recommends something similar. Been using a neoprene slip on and it annoys me because it keeps sliding. Could simply wrap tape but rather have something that looks nicer and more permanent. Any thoughts and suggestions appreciated
I also offer low profile hardware on my website so you can minutely adjust the Cheek Riser exactly where you need it for Actual Perfect Eye alignment with your Scope & no worries about the knobs. I just don't have that on Amazon like the link above.If you plan on Shooting NRL22 you'll dread every support side stage with those knobs. Second vote for the Victor Company rest from me.
Got the new LH T1x to the range first time--excellent precision after sight-in and 100% feeding/firing reliability.
When I got home to clean, noticed some inconsistency on the breech face, the lower part of the chamber at about 6:00. I have dry fired it maybe 15 - 20 times since getting it new and taking it to the range and put about 50rd of CCI through it. But otherwise haven't done anything to it.
Is the breech face damaged, or is this normal for a T1? Not used to seeing my other rimfire breech faces look this rough.
Here is the breech on a 2nd rifle, maybe 2K rounds. Looks a bit off, and this one does not shoot as well as the first one.Here is one that I would call normal. But, this is with 6K rounds thru it.
However, if you are satisfied with the way it shoots and functions, I would not worry about it. If you are concerned send it in.
What causes the groove above the chamber? Mine has it too.Here is one that I would call normal. But, this is with 6K rounds thru it.
However, if you are satisfied with the way it shoots and functions, I would not worry about it. If you are concerned send it in.
It appears to be caused by the ledge directly above the firing pin as there is wear there also.What causes the groove above the chamber? Mine has it too.
Thanks for the replies, all makes sense.
Mostly wondered if this should be seen as normal for a new T1x OEM chamber mouth. Again confirming that the rifle shoots great so far, so as long as it works I can live with it not looking pretty. But it just looks a bit off, compared to the breech face on my other .22's. At about 6:00, it's almost like there's a tiny bevel or ramp cut into the chamber mouth.
Here's a better pic enlarged, with an arrow pointing to the area I'm looking at.
I got mine in 2020. Tikka definitely added a "feed ramp" after production. I say that because the cut isn't blued.A bit of a feed ramp. Looks ok to me. I wish mine looked that nice.
One has to keep in mind this is not a $3K custom. Mine shoot way above where they should for the price.
the vertical grip and t3 recoil pad essentially fix the t1x stock for like $50. The oem stock is servicable. 22LR magwell is very short, and doesn't take up tons of room between the trigger guard and the bipod.
It'll drop in, the stock on T1x is exactly the same other than butt pad.Just saw some of these posts about the T3x recoil pad.
Can you drop a barreled T1x action directly into a T3x OEM stock? Or is it only the recoil pad that's reusable on the T1x? I have a spare T3x OEM sitting around.
Matthew posts like this are against the rules of the forumHello,
Yes, I custom mold my Cheek Risers to fit many different stocks, including the Tikka T1x. I also has Low Profile Allen Key Hardware as well as the Quick Adjustment Knob hardware. I just only have the Quick Adjustment Knob hardware on Amazon. The rest is on my site
I can also do images, camo patterns, etcetera on colored Kydex.
If you have any questions, don't hesitate to ask. View attachment 8028351
Sincerely,
Matthew
Given how dirty .22 is it leads to fouling the compensator quickly. Since the lube component is soft I've seen it "hang" in the way and would get the random wild flyer from it. By wild, I'm talking several feet from where I was holding at 100.I'm waiting for my T1X to be released from FFL but in the mean time a question popped up in my head. Can you use a heavy .223 compensator on a T1X or other rimfire? I have a SJC Titan which is quite a chunk collecting dust, I'm not sure if it could affect in any negative way barrel harmonics or something alike. My Tikka comes with threaded barrel. Are there any potential downsides/issues to such combo?
ScopeList had them today. On orderI have been looking for a lefty in 22LR. I can only find 17. Does any one know where I can find one?
My T1X is a little different - it has an additional piece of rounded plastic (a bit like a section of a cone) screwed into the forend. It's removable, though, which then makes it look exactly like a T3X.It'll drop in, the stock on T1x is exactly the same other than butt pad.
ScopeList had them today. On order
Now I need to figure out a left handed stock or chassis to put on it.
Eurooptic is the same place as scopelist. I haven't seen any lefty t1x in 22 anywhere that isn't back ordered.JK. They just called me and said that they didn't have one to ship me and no ETA on when one will be delivered. So I guess I am cancelling and will find a new one some where else.
Might depend on who you get, and how your local Beretta rolls ...A bold and dubious idea, you may want to give a call to Beretta/Tikka and see if they would be so kind to tell you any details about when was the last batch of such specific rifles sent out, is there one coming and so on. These being a product they probably make a batch every full moon combined with eager to be happy customer may result in someone at the corpo being extra helpful. 95% sure they won't tell you a thing but who knows...