Ewww, Jeeps. The Hi Point of vehicles.
Somehow we've found something gayer than the factory color of our rifles (and let's be honest, none of them are particularly good) to discuss.
Come on guys... I know a few of you guys have electric golf carts to get you into position 
Ewww, Jeeps. The Hi Point of vehicles.
If these heated leather seats and radar cruise control are wrong... I never want to be right
Don't all AI owners drive Ford pickups as daily drivers?
Yes. Only pic I have of it but it's got a Diamondback cover on it now.
Mine also, mildly built AMC 360 w T18, Tera Low Dana 20, fully locked Dana 44s w 5.13s. Just need hydro steer.
Full built 60s on mine and atlas t case, I also run hydro steer assist. I’m on fox coil overs with a 104inch wheelbase.
Attachments
ES+Cement Tundra = Ze Master ComboES+Ford may be the new master race
The only white Toyota that’s permitted is a Hilux. Anything else might as well be a Ford fleet vehicle (which is typically owned by someone with an FDE or PB AI).
also with this adapter I could rebarrel in .223 or 6 br if I really wanted to since they don't have these options for the platform now.
I don't want to hear it, this is all your fault anyway after the rave review of yours, haha!
So what is this the new truck forum ..........
Yes. Also have a 3/4 ton for work lol
Ignore the curbed wheels. The Starbucks drive thru is pretty narrow
I do not own an AI but I suspect I will eventually. After reading this thread In it's entirety more than once I find it confidence inspiring that these rifles are so consistently good the only thing owners can argue about is the color of the paint applied to them; when that dead horse has been beaten thoroughly you compare which vehicles you drive.
1st world problems for sure, but count me in. I just wish they were made in the US.
1st world problems for sure, but count me in. I just wish they were made in the US.
I too do not currently own an AI, but looking.
Good to know that it will play nicely with my Tremor F350!
Good to know that it will play nicely with my Tremor F350!
Looks like an opportunity for a new market. Just think if there was a whole website dedicated to just truck shit. Possibilities are endless...
Snow day... 0 trucks made it up interestingly enough but jeeps did 
Has anyone had issues mounting ADM quick release mounts on Elite Iron AI spigots? The recoil lugs on the ADM mounts won't fit into the picatinny slots of the EI mounts. I measured the slots on two different EI spigots using calipers and every slot is 0.197". The ADM mounts will seat properly on my G Mk16 rail and HK416 rail. The distance of the slots on the G/HK rails is 0.208/0.203. I sent EI an email so we'll see what they can do.
Last edited:
My EI measures .2025. Every slot.Has anyone had issues mounting ADM quick release mounts on Elite Iron AI spigots? The recoil lugs on the ADM mounts won't fit into the picatinny slots of the EI mounts. I measured using calipers and the space between two different EI spigots is 0.197". The ADM mounts will seat properly on my G Mk16 rail and HK416 rail. The distance of the slots on the G/HK rails is 0.208/0.203. I sent EI an email so we'll see what they can do.
Right. Coulda had the light weight masterrace nx8 2.5-20
How to turn a bad weather situation at the range into fun...Just add an AI or two!
Last edited:
Last edited:
Some velocity testing with the short action in .260R. This barrel did not like the factory 136 Bergers. They hammered in my Proof CF barrel, but no luv in this one.
Last edited:
How you liking the AndiScan?
My EI AT spigot I just received was having the same issues as you are seeing. Pic rail slot was too narrow. I took a file to that thing to open up the slot I was using. Used some alumablack and it's good to go.Has anyone had issues mounting ADM quick release mounts on Elite Iron AI spigots? The recoil lugs on the ADM mounts won't fit into the picatinny slots of the EI mounts. I measured the slots on two different EI spigots using calipers and every slot is 0.197". The ADM mounts will seat properly on my G Mk16 rail and HK416 rail. The distance of the slots on the G/HK rails is 0.208/0.203. I sent EI an email so we'll see what they can do.
They go together we'll. Let me know when I can help you get that AI to complete the package.
Attachments
Looks like a job for a 7 axis Dremel..... Get that cocking ramp reworked at the same time
Good idea. I'll send it out for the other slots to get that proper treatment.
I like it a lot, I have had it for a couple of months now and it has worked well on everything from 50 BMG to .177 cal pistol BBs. I did screw up and used the wrong bracket with the 50 BMG that broke the housing and launched the chrono into my forehead...I emailed Jan about it at 4:00 PM eastern that Sunday afternoon and he replied 11 minutes later, 10:00 PM CZ. A little over a week later I received a new housing via FedEx expedited, no charge for part or shipping. He even very politely reminded me that I wasn't using the right bracket, that I had ordered and paid extra for....
