@jps24 We'll be doing a Know You Limits on R4 Sunday so, you can come to R4 to lick your PRS wounds.
I wish I could spend two days in a row shooting but I can't swing that at the moment with my family
Anybody know how to adjust the trigger weight on the AXSR? I checked my ATX and AXSR manual and it it only covers adjusting the trigger shoe placement and not adjusting the trigger pull weight.
Shitty pic for attention
Shitty pic for attention
Thanks man! I wanted to pump up the 2nd stage weight a smidge but looks like that’s gonna be more of a job than I expected…
Basement pics are lame. But barrel came in while I was out.
AT in AO chassis.
TT
Hawk Hill 6.5
Thereom L w/brake
AT in AO chassis.
TT
Hawk Hill 6.5
Thereom L w/brake
Last edited:
Gdamn took me a sec to figure out how the gun was “floating.”
Thought there was a glass table involved, then fishing line, then Aha!
Old enough to be hosted on PB…
It is an AW, one of two I owned in addition to several ATs. The AT gives up nothing to the AW & brings the excellent QC system to the table, but there is something I truly miss about the AW…
Hole on the bottom right side of the action is the easiest way to know the difference between the 2.
like this
Accuracy International Spigot Mount
Increase the stability of your Accuracy International with a custom spigot bipod mount by Anarchy Outdoors. This single-piece 6061-T6 Aluminon and Type-III Hardcoated spigot mount is the perfect upgrade.
www.anarchyoutdoors.com
Im looking for one continuous plane from the mag to the tip.like this
Accuracy International Spigot Mount
Increase the stability of your Accuracy International with a custom spigot bipod mount by Anarchy Outdoors. This single-piece 6061-T6 Aluminon and Type-III Hardcoated spigot mount is the perfect upgrade.
What do you mean by the phrase, “spigot support”?
This is the rail I use, but it isn’t extended:
MBE - Accuracy international AT ARCA Rail
MBE - Accuracy international AT Arca rail.
www.sportingservices.co.uk
I can still use the spigot by way of the cutout up front. I have to use a long thin thing, like an allen wrench, to press the spigot button.
See attached illustration - spigot has arca that continues all the way back to the magwell area.
Attachments
Last edited:
I saw somebody had a pic version in the artic warfare thread but yeah I haven't either.
Hint hint machinists
I think your best bet would be to source an NV spigot mount like an IMUNS or something that extends the spigot forward, then get the longer sawtooth rail, if you want long arca AND spigot support (just curious, why?)
I’ve never seen or heard of one that attaches to the spigot and extends back. To me unless it attached to the forend and spigot area both it be super wobbly anyways.
I had the extended rail on mine. I cut it off at the forend and run a picatinny on the spigot. That way I can use Arca or pic, the picatinny portion doesn’t allow the Arca clamp to slide on rail and it’s lower to the bore axis
Both my AT’s are set up the same.
Here’s an extended spigot that came off an AE, compared to a typical IMUNS spigot.
But neither of these will work on an AT. These need to have a fore end with a hand stop slot like this:
But neither of these will work on an AT. These need to have a fore end with a hand stop slot like this:
Right exactly
So imagine you welded those two things together - that's what I was hoping already existed out there somewhere.
Nice rifles and thanks for the info
