@jps24 We'll be doing a Know You Limits on R4 Sunday so, you can come to R4 to lick your PRS wounds.
I wish I could spend two days in a row shooting but I can't swing that at the moment with my family
Anybody know how to adjust the trigger weight on the AXSR? I checked my ATX and AXSR manual and it it only covers adjusting the trigger shoe placement and not adjusting the trigger pull weight.
Shitty pic for attention
Shitty pic for attention
Thanks man! I wanted to pump up the 2nd stage weight a smidge but looks like that’s gonna be more of a job than I expected…
Basement pics are lame. But barrel came in while I was out.
AT in AO chassis.
TT
Hawk Hill 6.5
Thereom L w/brake
AT in AO chassis.
TT
Hawk Hill 6.5
Thereom L w/brake
Last edited:
Gdamn took me a sec to figure out how the gun was “floating.”
Thought there was a glass table involved, then fishing line, then Aha!
Old enough to be hosted on PB…
It is an AW, one of two I owned in addition to several ATs. The AT gives up nothing to the AW & brings the excellent QC system to the table, but there is something I truly miss about the AW…
Hole on the bottom right side of the action is the easiest way to know the difference between the 2.
like this
Accuracy International Spigot Mount
Increase the stability of your Accuracy International with a custom spigot bipod mount by Anarchy Outdoors. This single-piece 6061-T6 Aluminon and Type-III Hardcoated spigot mount is the perfect upgrade.
www.anarchyoutdoors.com
Im looking for one continuous plane from the mag to the tip.like this
Accuracy International Spigot Mount
Increase the stability of your Accuracy International with a custom spigot bipod mount by Anarchy Outdoors. This single-piece 6061-T6 Aluminon and Type-III Hardcoated spigot mount is the perfect upgrade.
What do you mean by the phrase, “spigot support”?
This is the rail I use, but it isn’t extended:
MBE - Accuracy international AT ARCA Rail
MBE - Accuracy international AT Arca rail.
www.sportingservices.co.uk
I can still use the spigot by way of the cutout up front. I have to use a long thin thing, like an allen wrench, to press the spigot button.
See attached illustration - spigot has arca that continues all the way back to the magwell area.
Attachments
Last edited:
I saw somebody had a pic version in the artic warfare thread but yeah I haven't either.
Hint hint machinists
I think your best bet would be to source an NV spigot mount like an IMUNS or something that extends the spigot forward, then get the longer sawtooth rail, if you want long arca AND spigot support (just curious, why?)
I’ve never seen or heard of one that attaches to the spigot and extends back. To me unless it attached to the forend and spigot area both it be super wobbly anyways.
I had the extended rail on mine. I cut it off at the forend and run a picatinny on the spigot. That way I can use Arca or pic, the picatinny portion doesn’t allow the Arca clamp to slide on rail and it’s lower to the bore axis
Both my AT’s are set up the same.
Here’s an extended spigot that came off an AE, compared to a typical IMUNS spigot.
But neither of these will work on an AT. These need to have a fore end with a hand stop slot like this:
But neither of these will work on an AT. These need to have a fore end with a hand stop slot like this:
Right exactly
So imagine you welded those two things together - that's what I was hoping already existed out there somewhere.
Nice rifles and thanks for the info
AIAT 22-250 out on the prairie
Last edited:
Where’s the cooler full of beer? Let alone the sunbrella
Nothing makes a range day like some AI's pounding steel!! Best factory built hammers, hands down!
Hi, what type of bipod is that with the circular clamp? How does it fix to the handguard? Have you got any close up photos? I have one and a few spares but didn’t know what it is for. Thanks
Everyone says that, so I bought one years ago for that reason. For ME, I did not find that to be the case. Due to the extra length of the legs, I found it to be wobbly because of all the flex in the long legs. The reticle wanted to shift/wobble left and right, like the butt was fishtailing. It's the only bipod I've ever bought that I just couldn't stand using anymore. It also cost almost double the price of a Super CAL. No disrespect to those who love them (a lot of folks here do), but it wasn't a good fit for me (on an AXMC).
Wrapping up the 2 kinetic comp marathon mountain sniper challenge.... Haven't cleaned her since last year and still has NF elr mud all over it...straight doing work. Love that rifle....
18" PVA Osprey carbon barrel in 25 Creed came in today. Hopefully it shoots as well as it looks.
You know me...shorts and sandals and AI till I die
Somewhere on this forum I read that Fritz at Black Canyon Customs can rework an AI AXMC 308 bolt to a 300 WM bolt by opening up the bolt face.
I can't find the reference so asklng if anyone can verify that
I can't find the reference so asklng if anyone can verify that
Fritz has been converting the .308 bolt faces to magnums for guys wanting to run 6.5prc or .300wsm. I believe its for the AT’s/AX? Whichever is the short action you can actually find bolts for.
