Official Accuracy International AT-X

[ThatHKMarksman]

Uh brah no.... Different action different bolt

AT-XC bolts are not compatible with AT/AW bolts

I just picked up an AT-XC and was going to have Bugholes do a 223 conversion. I was able to find a complete bolt, but when I went to put it into the gun, it was a no-go. After comparing the two bolts, it is clear that the changes they made for the AT-XC are significant. Unless I am missing...

www.snipershide.com

I'm fixing it. Keyboard autocorrected. AT-X, not AT-XC.

 

[hafejd30]

AT/AX/ATX are the same
ATXC is new style

Same for AXMC vs AXSR bolts

 

[RUN8]

I would love to get an AT bolt to get opened up to .532”-535”.

Sadly they seem to be unobtainable.

 

[Tex68w]

I would love to get an AT bolt to get opened up to .532”-535”.

Sadly they seem to be unobtainable.

But at least they exist haha. We AT-XC guys will be out here just wishing and hoping that they will eventually offer them.

 

[marc.south1972]

AI-ATX IN 6.5 ZEISS

LRP S3 6-36x56​

SANDMAN S

 

[olive drab]

Has anyone run an elite iron bipod on their at-x or will it not fit?

 

[carbonbased]

Has anyone run an elite iron bipod on their at-x or will it not fit?

That question is too vague, as EI makes all sorts of adapters with different barrel-top to rail distances. You’re sort of asking, “How long is a piece of string?”

I’ve attached an EI on a AX. I’m positive that EI makes an adapter that will allow what you seek.

 

[Wilsmartin]

Does anybody have the weight of the atx or Atxc without a barrel? Or ideally without a barrel,bridge and bag rider? Trying to spec out a a build to ride just under 16 lbs. Thanks

 

[BurtG]

Has anyone run an elite iron bipod on their at-x or will it not fit?

 

[Mj30wilson900]

Try selling outside the PX again and you will be banned.

 

[xxflyingturtlexx]

View attachment 8719268


View attachment 8719269

Lol

 

[BurtG]

Lol

 

[farrar86]

@BurtG for the hoptic to work, do you use the keymod version? How well does it work as far as retention under movement and pulling a round out? My sticky SAC quiver slowly works the rounds out during matches.

 

[BurtG]

Works fine yes Keymod. Tension is adjustable

 

[Mj30wilson900]

@BurtG for the hoptic to work, do you use the keymod version? How well does it work as far as retention under movement and pulling a round out? My sticky SAC quiver slowly works the rounds out during matches.

Ask about his chamber flag add on for the Hoptic quiver. Very helpful place to store it.

 

[Benz1]

Had mine in 6.5CM out to NRA Whittington a few weeks ago. What an amazing gun now that it is broken in and the bolt lift is reduced significantly. Had a few hits at 1900 yards and many 5+ hit strings at 1 mile with it

 

[AXMC]

Have a way to measure what your bolt lift is now? How many rounds through it?

 

[xxflyingturtlexx]

Have a way to measure what your bolt lift is now? How many rounds through it?

Bolt lift does not significantly drop; the action becomes very smooth. My bolt lift after 3 barrels feels tiny bit better. Operator gets used it too. That whole myth of heavy bolt lift goes away is placebo.

 

[Benz1]

I don't, but I'd say it is at least 25% lighter than when new. 750 rounds through the gun as it sits. Really started to lighten up after approximately 3-400 rounds

I can now easily cycle the bolt while staying on the scope without losing sight picture, which was near impossible previously

 

[Benz1]

Bolt lift does not significantly drop; the action becomes very smooth. My bolt lift after 3 barrels feels tiny bit better. Operator gets used it too. That whole myth of heavy bolt lift goes away is placebo.

Potentially but the action was always smooth. I can now easily cycle the bolt while staying on the scope without losing sight picture, which was near impossible previously due to the effort required to manipulate the bolt

 

[TylerN]

The finish smooths out on AI rifles with the first 1K rounds for sure. The finish on the cocking ramp probably smooths out some as well helping bolt lift a tiny amount. Don't even need to use the 7-axis mill, after 1k down the pipe it's smoother.

 

[Kilohotel]

Had mine in 6.5CM out to NRA Whittington a few weeks ago. What an amazing gun now that it is broken in and the bolt lift is reduced significantly. Had a few hits at 1900 yards and many 5+ hit strings at 1 mile with it

You were able to fit under the 16lbs restriction?

 

[Benz1]

You were able to fit under the 16lbs restriction?

This was a long range training class, not a competition. It's well over 16lbs

 

[CageFighter]

View attachment 8615853View attachment 8615854

what wings are those?? looks kinda like the Baker wings by MDT, but smaller. please advise.

 

[Criver600]

what wings are those?? looks kinda like the Baker wings by MDT, but smaller. please advise.

MBE Ballistic Solutions UK

 

[Roadrace33]

I have 3 barrels ready to get chambered for my ATXC. It just dawned on me that the 1.250 straight contour wouldn’t fit on the ATX with the bridge installed. I assume the same applies to the ATXC doesn’t it? If so I’ll have to see if he can turn these down a tad bit…

 

[farrar86]

I have a CRB comp taper barrel that fits but you have to leave the bridge on, lower it in,and screw it down. The fit is very tight but it fits.

 

[Roadrace33]

Totally forgot I had this old 1.25 m27 tenon barrel for my AXSA. 1.250 straight contour will fit in the ATXC but it is tight. I’m going to have my smith cut those barrels for my Impacts instead, and send him some CRB comps instead for the XC just so there is more clearance.

 

[farrar86]

Looks about right. Not much room but there is.

 

[hafejd30]

I have 3 barrels ready to get chambered for my ATXC. It just dawned on me that the 1.250 straight contour wouldn’t fit on the ATX with the bridge installed. I assume the same applies to the ATXC doesn’t it? If so I’ll have to see if he can turn these down a tad bit…

Totally forgot I had this old 1.25 m27 tenon barrel for my AXSA. 1.250 straight contour will fit in the ATXC but it is tight. I’m going to have my smith cut those barrels for my Impacts instead, and send him some CRB comps instead for the XC just so there is more clearance.

I believe they would fit the ATX similar to what your ATXC is showing in the pic. But when fired the barrel flexed enough to make contact. @Nik H I'm pretty sure had a similar fit on his ATX and that was the issue

 

[Roadrace33]

I believe they would fit the ATX similar to what your ATXC is showing in the pic. But when fired the barrel flexed enough to make contact. @Nik H I'm pretty sure had a similar fit on his ATX and that was the issue

Ya its real close. Sucks I bought those blanks with the intentions of going on the ATXC but ill run them on the impacts. I like the free weight of the straight contour.

 

[Nik H]

I believe they would fit the ATX similar to what your ATXC is showing in the pic. But when fired the barrel flexed enough to make contact. @Nik H I'm pretty sure had a similar fit on his ATX and that was the issue

That was the case on my AT. The straight contour would not work with my NV bridge.

Being LH, I am not allowed to have the new ATXC or whatever they call it now...LOL

 

[hafejd30]

That was the case on my AT. The straight contour would not work with my NV bridge.

Being LH, I am not allowed to have the new ATXC or whatever they call it now...LOL

You also didn’t think you were allowed to have a LH 300 WM bolt either…

But 8 short years later and here we are!!

You hang in there my wrong handed friend

2034 is your year…I feel it

 

[vh20]

You also didn’t think you were allowed to have a LH 300 WM bolt either…

But 8 short years later and here we are!!

You hang in there my wrong handed friend

2034 is your year…I feel it

Just in time for his right-handed grandson to inherit it...