Suppressors SiCo Omega end cap.

#105
God damn it, I bought a shiny one even though I havent even submitted the form 4 for the new omega but I was afraid that it would be a one time thing and they would sell out before I got around to it.

Oh well, baller baller shiny cap, just need to polish the cerakote off and make than can a pretty polish too.
 
#108
Shiney looks nice :)
IMG_20191019_120047_212.jpg
 
  • Like
Reactions: Jgunner, ccasanova, HansohnBrothers and 1 other person
#113
Went with Sid's idea , placed order for both end caps in titanium, shiny.
(6.5 front cap)
Will give updates as soon as they come in.
 
  • Like
Reactions: sid
#115
Got my "silver" end caps in, put them on my Hybrid, Front end cap is flush and looks great, Rear or barrel end , is not quite flush, have to take apart again to see if carbon from the OEM end cap is restricting the complete install
 
#117
I looked for one of these for a while before I ordered a regular one about a year ago. Looks like I will be ordering one. What are approx weight savings between the 2? (Sico vs Ti HB)
 
#118
Last edited:
#119
TACC said:
Got my "silver" end caps in, put them on my Hybrid, Front end cap is flush and looks great, Rear or barrel end , is not quite flush, have to take apart again to see if carbon from the OEM end cap is restricting the complete install
Click to expand...
Did you get this figured out? Mine are completely flush, but I installed them on a brand new suppressor that I hadn't shot yet
 
#121
sid said:
Did you get this figured out? Mine are completely flush, but I installed them on a brand new suppressor that I hadn't shot yet
Click to expand...

I got my end cap and threaded adapter today. They are the cerakoted ones and they are very nice. My suppressor has 150 rounds on it is all and I had to clean out some of the carbon to get it to sit flush. It’s nothing to do with the Ti parts at all.the machining and quality are fantastic on these pieces!
 
  • Like
Reactions: HansohnBrothers, sid and TACC
#122
mustang-cars said:
I got my end cap and threaded adapter today. They are the cerakoted ones and they are very nice. My suppressor has 150 rounds on it is all and I had to clean out some of the carbon to get it to sit flush. It’s nothing to do with the Ti parts at all.the machining and quality are fantastic on these pieces!
Click to expand...
I know and I agree that the titanium pieces are great quality, I just wanted to make sure TACC is happy about them too since I basically send him the link which ones he should buy
It be a bummer if he wasn't happy with them!
 
  • Like
Reactions: HansohnBrothers
#125
Parts are Top quality and look great.

So I put the new end cap on and it’s great. POI did not shift/change. To my unlearned mind, recoil and report seem about the same out of my 300 WM with the 1.5 inch brake that goes on the end of the can. Definitely a good upgrade.

Then I put the new direct thread module in after spending a boatload of time with rags, tooth brush and CLP trying to get all the crusty carbon fouling off the inside threads of the can. Apparently the new module goes in deeper than the OEM one. I used CLP on the threads before but the portion that were exposed deeper in the can were crispy coated. So new adapter was hitting resistance in the last quarter of the threads. Think I finally got it balls deep so to speak.

But I did get a new POI shit about two inches right. Only reason it bothers me is b/c the shift between can on/off was a straight 1.5 vertical deviation with the OEM adapter. Now I have a vertical and horizontal deviation. Makes me wonder if the adapter truly is flush mounted or if residual carbon is still throwing in a variable.

Anybody else getting a new revised shift with the new direct thread adapters verse the OEM. Kind of suspect it’s just part of the deal but perhaps I need to really go ape shit trying to remove the remaining carbon.
 
Last edited:
#126
Conrad101st said:
... portion that were exposed deeper in the can were crispy coated. So new adapter was hitting resistance in the last quarter of the threads. Think I finally got it balls deep so to speak.
... remove the remaining carbon.
Click to expand...
Yes, the Omega threads are probably caked, a lot, especially if you have a high round count. I've found CLP to be lacking and recommend SLiP2000 Carbon Cutter, CLR or something similar.
 
  • Like
Reactions: TACC
You must log in or register to reply here.

Similar threads

Hotcoffee4all
SOLD WTS: SilencerCo Charlie End-Caps: PRICE DROPPED!
Replies
2
Views
404
Hotcoffee4all
Hotcoffee4all
A
Thunderbeast RR end cap adapter group buy - 338 ultra and magnus
Replies
160
Views
10K
nrspence
nrspence
J
SOLD FS: Silenerco Omega 300 with a few extra end caps (Florida buyers)
Replies
2
Views
310
981kirk
981kirk
W
Suppressors Want another 30 Cal Suppressor, considering Jolene S
Replies
20
Views
2K
J-Hon
J
W
Suppressors Input on Suppressor for 357 lever gun & PCC
Replies
31
Views
6K
AleksanderSuave
A
Top Bottom
Back
Home
Forums
Merch
Alerts