Just paid my invoice and said they would notify when shipping. Order number changed from original order number oddly enough though. Not sure what’s happening next.
-
Having trouble using the site?
Contact support
Autotrickler V3 - CE Products?
- Thread starter NiteQwill
- Start date
Yes, the invoice number will change. They did not notify me of shipping, I was notified through my UPS Account that I had an incoming package. In fact, the package is sitting on my porch right now!
Same... Paid my final invoice today. New Order #5778RS. Old Order #5259RS.
Crossing my fingers it's here shortly. Need to get to loading for the Khales Match.
Andrew
Crossing my fingers it's here shortly. Need to get to loading for the Khales Match.
Andrew
Good luck with the match! My (local rifle) matches were cancelled - so I've been load developing some new Bergers. I'm hoping to still go to Area 1 and Oregon State Championship for USPSA, barring any cancellations... Which could be likely.
Well I’m curious to see how this shakes out that for sure. Looking forward to playing with it hahaYes, the invoice number will change. They did not notify me of shipping, I was notified through my UPS Account that I had an incoming package. In fact, the package is sitting on my porch right now!
Paid my invoice last week. UPS says it will be delivered this Wednesday. Chargemaster 1500 will be up for sale on the PX end of this week.
Received it yesterday and super blown away. Setup in 10 minutes (after installing the Area419 upgrades). Still fine tuning the trickler but I'm more than happy so far. But I was able to drop 43.2 gr H4350 in 7 seconds. The Bluetooth is super cool. Highly recommend the Area419 goodies.
43.2 gr H4350 Autotrickler Video
I filled 100 cases in 14 minutes.
43.2 gr H4350 Autotrickler Video
I filled 100 cases in 14 minutes.
Did a simple mod by closing off the open area on the right next to Autotrickler. The original instructions call for only 2 of 4 of the acrylic windscreens/windows... So I decided to make use of the spare windows. Used a Dremel at 3500 RPM. Went really slow and covered the surrounding area in painters tape. Turned out great!
Was just thinking about doing the sameDid a simple mod by closing off the open area on the right next to Autotrickler. The original instructions call for only 2 of 4 of the acrylic windscreens/windows... So I decided to make use of the spare windows. Used a Dremel at 3500 RPM. Went really slow and covered the surrounding area in painters tape. Turned out great!
Anyone that received the notification that their V3 would ship the week of May 11 get an email to finish payment? The 11th is Monday and I haven’t seen anything to finish paying.
You will get an email that allows you to pay the remaining balance. Here's to a speedy delivery! Mine was delayed at the border so it took 2 weeks!
I just bought the trickler and set up a cheap lee dropper on top. I printed a mount/funnel and knob for it and it's plenty quick enough.
You most likely won't get an email (like in my case). If you sign up for UPS MyChoice, you can get advanced notification of shipment.
Mine is on the Big Brown truck for delivery today. Thinking of cutting out of work early, just to play with it. (The V3, too.) 
Already had the manual powder drop. But the auto-trickler sure makes it faster. 100 rounds in about 45mins, with only 1/2 dozen over throws. 
At the time i ordered the website had posted a 4-6 week lead time (6 weeks today for me) but i see now its posted at 6- 8 weeks.
That’s exactly what I just emailed them asking for a status update because mine also said 4-6 weeks at the time
They are certainly not very good at replying to emails or Facebook Messenger. Sorry. But the upside is you WILL eventually receive it.
I got everything delivered from DWS in less than 4 weeks and they were good about communicating. Estimated delivery was 3 weeks so they were pretty accurate. They also called the day of shipping to see if i wanted to add anything else to the order before they sent my box out.
Sounds like a good outcome. The only reason I didn't do DWS is they didn't include a 100 gram calibration weight. Unless it has changed.
What type of tool (bit) did you use in the Dremel? A normal drill or a burr or stone of some sort? Did you use the Dremel opposed to a drill because you can control the rpm? Thank you.Did a simple mod by closing off the open area on the right next to Autotrickler. The original instructions call for only 2 of 4 of the acrylic windscreens/windows... So I decided to make use of the spare windows. Used a Dremel at 3500 RPM. Went really slow and covered the surrounding area in painters tape. Turned out great!
I only ordered from DWS because CE would not ship to California. Worked out for the better.
I used a diamond drill bit. A drill will possibly crack the acrylic. I used the adapter on the Dremel that controls depth (I have no idea what it's called).
Wow. Not only a limit on firearms but (dangerous) pharmaceutical grade scales, too?
In all seriousness, that's so strange.
Ordered 10 minutes ago. Took a couple weeks to think about it. I guess I don't need a CMP Garand.
Im right there with you on 4-15 #5590RS. I sure wish their process was different. I never got so much as a confirmation email with an order number. I know no one twisted my arm ordering from them.... but it could have been done a little bit better.
