Accuracy International Picture Thread

[trophyhunter]

Small-batch, organic, grain fed, gluten free, with a hint of old school and a dose of snobbery. I like how you put a big magnum cartridge in an extremely short barrel and topped it with a long suppressor. As if to say to everyones silent unspoken question, "... because I can...and I do what I want.."

It started life as a shorty suppressed 308 barrel. I had the AXMC (16”)handguard and wanted it to stick out just a bit. Then I rechambered it to 300wsm. Even with that shorty barrel I’m getting 180’s at 3060fps, flips over 100lb deer like nobodies business

 

[Huskydriver]

I did a big boy thing this week. Bought my first S&B, a PMII. Grid reticle. I’m really digging this setup.
View attachment 7315194

Let me know when your ready to sell this if it's sfp lol.

I'm loving the grid reticle in my sb. The grid is easy to see through and at 12x I don't even notice it.

 

[Nik H]

Are the 15’ AX short action rifles all SFP or is there a chance that it could be LFP?

Anything 15 or later in an AT or AX short action is SFP

 

[The Durk]

Let me know when your ready to sell this if it's sfp lol.

I'm loving the grid reticle in my sb. The grid is easy to see through and at 12x I don't even notice it.

Sorry bud, I only shoot FFP scopes

 

[Huskydriver]

Sorry bud, I only shoot FFP scopes

I'm talking about your ai at if it's small firing pin.

 

[deersniper]

Hey you AX owners with the Anarchy thumb rest. Am I missing a part in this kit? Before I tear my gun apart?
Thanks. Think I am missing the threaded insert but could be weong

 

[samb300]

Hey you AX owners with the Anarchy thumb rest. Am I missing a part in this kit? Before I tear my gun apart?
Thanks. Think I am missing the threaded insert but could be weong

View attachment 7315767

It looks like you have the AX buttstock, in that case the chassis will already have the metal threaded insert that the rear of the thumb rest screws into.

If you're missing the front plastic insert that should come with the kit, my apologies, you'll have to get ahold of Anarchy and have them send you one.

 

[deersniper]

Thanks I didn’t have threaded insert in my kit

 

[Glassaholic]

It looks like you have the AX buttstock, in that case the chassis will already have the metal threaded insert that the rear of the thumb rest screws into.

If you're missing the front plastic insert that should come with the kit, my apologies, you'll have to get ahold of Anarchy and have them send you one.

View attachment 7315784

The Anarchy Outdoors AI thumbrest is truly a brilliant design and looks like it was designed by AI - using existing bolt holes and pieces. When installing on my AT the push button sling thingy (I can't think of the official name right now and too lazy to look it up ) was a bear to unscrew, I thought I was going to break my allen key, but I grabbed a vice grip and locked on the other side and was able to release the tension on the screw.

 

[samb300]

The Anarchy Outdoors AI thumbrest is truly a brilliant design and looks like it was designed by AI - using existing bolt holes and pieces. When installing on my AT the push button sling thingy (I can't think of the official name right now and too lazy to look it up ) was a bear to unscrew, I thought I was going to break my allen key, but I grabbed a vice grip and locked on the other side and was able to release the tension on the screw.

View attachment 7315846

Thanks, I’m glad you’re liking it! I tried to make the shape/size/angle as universal as I could, but I understand it isn’t perfect for everyone.

The 3D printed Nylon from Anarchy certainly is a step up from the original ones I was printing when I first started selling them, though! The 3D printer they use costs more than my house...

 

[BuLLet]

Added a Scope and APA Little Bastard III to a 308 Barrel I had, took it to the range to sight it in. Bad luck day they were closed

I was going to add the plugs to the brake after trying it with them out.. next time hopefully the range will be open.

 

[Nik H]

The Anarchy Outdoors AI thumbrest is truly a brilliant design and looks like it was designed by AI - using existing bolt holes and pieces. When installing on my AT the push button sling thingy (I can't think of the official name right now and too lazy to look it up ) was a bear to unscrew, I thought I was going to break my allen key, but I grabbed a vice grip and locked on the other side and was able to release the tension on the screw.

View attachment 7315846

@wjm308 - Are you LH and shooting a RH bolt?

 

[Huskydriver]

@wjm308 - Are you LH and shooting a RH bolt?

Please tell me you run yours on the other side and your right handed!

 

[Nik H]

Please tell me you run yours on the other side and your right handed!

No

My thumb is on the RHS of the stick but the bolt knob is on the opposite LHS.

 

[Huskydriver]

No

My thumb is on the RHS of the stick but the bolt knob is on the opposite LHS.

Post a pic of your set up

 

[Nik H]

Post a pic of your set up

I need to stop drinking

 

[Huskydriver]

I need to stop drinking

Lol common post a pic of how your grip is set up!

 

[Nik H]

Lol common post a pic of how your grip is set up!

I actually have not installed it...I bought one of the first ones from Sam directly but it sits in my parts bin.

I forgot it is designed to keep your thumb on the same side as the bolt.

 

[Doctorwho1138]

Just topped this off with a new scope... 338NM

All Black, still looking good over these new fancy colors

View attachment 7312507
View attachment 7312508
View attachment 7312509

i have a black AXMC and I love it too. My first AI was PB and I went with black next. I just like black. Nice rifle!!

 

[MTxTwelve]

Added a Scope and APA Little Bastard III to a 308 Barrel I had, took it to the range to sight it in. Bad luck day they were closed

View attachment 7316123
View attachment 7316124
View attachment 7316125

I was going to add the plugs to the brake after trying it with them out.. next time hopefully the range will be open.

View attachment 7316128

What color rifle is this - is it Elite Sand? Looking to jump into a 6.5 AX and would like to run it with a Knight's Armament FDE QDC/PRS suppressor - just not sure how well the two colors would match-up. First world problems, here.

 

[BuLLet]

Yes, it's Elite Sand. Out of most of the colors this one is very shinny. At times it has a green hue to it.

What color rifle is this - is it Elite Sand? Looking to jump into a 6.5 AX and would like to run it with a Knight's Armament FDE QDC/PRS suppressor - just not sure how well the two colors would match-up. First world problems, here.

 

[Night Assassin]

I installed the new rail from Area 419 .

 

[The Durk]

I installed the new rail from Area 419 . View attachment 7317850

GAMER!

 

[Nodakplowboy]

To wet around here to shoot...

Waiting for a drier, sunny day.

Recently changed out rings, went to the ARC 34mmx1.42" and added the AI adjustable buttpad. Both were done to promote a better cheekweld and shooter comfort in the prone.

It's working.

 

[Hawkwood]

Let us know how the load dev goes.......

View attachment 7305773

Looks like Quantico...

 

[verdugo60]

Had a great day shooting my freshly serviced AXMC.

Tested my POI shift at 550 yards suppressed and unsuppressed, it did great. That plate’s about 5” wide.

 

[Fixr]

Looks like Quantico...

Correct, MCBQ Range 4.

 

[Mr. F]

Hammered rocks for 30 mins last evening on my way home

 

[7WSMShooter]

not new, but new to me

 

[Mr. F]

 

[kocustoms]

Hammered rocks for 30 mins last evening on my way homeView attachment 7319989

Heyyyyyy.. I know where that's at!

 

[kocustoms]

here's my new to me AXMC in Elite Sand. (thanks @Iamero ) waiting on my Scope & Mount to arrive still.

 

[Iamero]

Hell yea @kocustoms ! Enjoy it!

 

[AIAlan]

338 AXMC scope recommendations £2500 price range UK

 

[The Durk]

Took the AT varmint hunting this morning. No varmints. Just deer.

 

[MysizeisMAGNUM]

338 AXMC scope recommendations £2500 price range UK

S&B

 

[Hawkwood]

View attachment 7321783

Took the AT varmint hunting this morning. No varmints. Just deer. View attachment 7321109View attachment 7321105

‘What pad is that you have on the butt of your AT?

 

[BuLLet]

Looks like the AI Pad with the Plastic Extensions installed.

 

[The Durk]

View attachment 7321783


‘What pad is that you have on the butt of your AT?

All the spacers that come with the gun, and the AI target adjustable butt pad.

 

[Glassaholic]

All the spacers that come with the gun, and the AI target adjustable butt pad.

I need to do the same, LOP is short on my AI, bought it used so not sure how many come with it but has a 20mm and 10mm but I’d also like the adjustable cant so will see what I can put together once I get that.

 

[Huskydriver]

Took the AT varmint hunting this morning. No varmints. Just deer. View attachment 7321109View attachment 7321105

Still waiting for you to sell this to me

 

[The Durk]

The target butt pad adds another 10mm spacer built into it so it’ll help.

 

[kocustoms]

Finally got my Schmidt & Bender optic and Spurh optic mount on my new to me Elite Sand AXMC. went up to the range with @Huskydriver (the pale brown AXMC) and got it dialed in. The top group is his 5 shot group @100 bottom one is mine lol I still need some work on getting comfortable with the new platform. but all in all a good successful range day.

 

[Huskydriver]

Finally got my Schmidt & Bender optic and Spurh optic mount on my new to me Elite Sand AXMC. went up to the range with @Huskydriver (the pale brown AXMC) and got it dialed in. The top group is his 5 shot group @100 bottom one is mine lol I still need some work on getting comfortable with the new platform. but all in all a good successful range day.
View attachment 7323977

We need to get @Long Range 338 down from his snowcastle , and get @Mr. F and ,@tevan0707 on board to be unofficial team AI Utah and go shoot a match together.....

Maybe then @Scott Seigmund can throw us some AI swag to make everyone else even more jealous lol

 

[BLKWLFK9]

 

[Huskydriver]

View attachment 7324078

6 more FTW!

 

[NoLegs24]

We need to get @Long Range 338 down from his snowcastle , and get @Mr. F and ,@tevan0707 on board to be unofficial team AI Utah and go shoot a match together.....

Maybe then @Scott Seigmund can throw us some AI swag to make everyone else even more jealous lol

 

[kocustoms]

View attachment 7324120

I mean it has to pay off!! Lol. If not oh well still 5 badass AI’s shooting together would be pretty neat!

 

[kocustoms]

Here’s another one W/ @Huskydriver AXMC

 

[samb300]

I mean it has to pay off!! Lol. If not oh well still 5 badass AI’s shooting together would be pretty neat!