It came from case club. It seems to be several layers of the closed cell foam glued together. The case I ordered was for the AXMC rifle. I have altered it a little by cutting out some of the foam that was there to make certain items fit. I asked if they could alter the original foam a little to accommodate some other items but they could not. If I wanted one specific I had to order 10 cases and then I could specify how I wanted the foam to be cut.
It came from case club. It seems to be several layers of the closed cell foam glued together. The case I ordered was for the AXMC rifle. I have altered it a little by cutting out some of the foam that was there to make certain items fit. I asked if they could alter the original foam a little to accommodate some other items but they could not. If I wanted one specific I had to order 10 cases and then I could specify how I wanted the foam to be cut.
Amazon prime has the 2” thick closed cell foam (the good stuff) for like $60 a sheet. Each sheet fits a large rifle pelican/storm case. This stuff was $40 a sheet last November when I ordered it.
Attachments
Same field I was in when I posted a pic a couple of days ago. Positioned in a different part of the field tonight.
After this weekends match, my 6.5 is officially shot out at 2915 rounds down the pipe. Double checked my groups. 3+ inch group at 100 yards, and dropped my velocity by over 100fps. Screwed on the 308 barrel and now it’s time for hunting season.
Morning I forgot to take a bolt handle measurements on my AX this morning.
Ax or axmc (post 2014)
what is the distance from the center of the bolt to the bottom of the bolt handle knob (how far down does it go when looking from the side)
What is the distance from center of the bolt to outside edge of bolt handle knob (how far does it stick out when looking from the top)
Thanks
Ax or axmc (post 2014)
what is the distance from the center of the bolt to the bottom of the bolt handle knob (how far down does it go when looking from the side)
What is the distance from center of the bolt to outside edge of bolt handle knob (how far does it stick out when looking from the top)
Thanks
Fun night shoot followed by a beautiful morning...
My 7 year old with my 308 at 600yds, blowing 5-15mph, went 2 for 5. Pretty happy for him. He was pumped. (One just nicked the side of the plate at 9:30)
I’m just wanted to nerd out in the technical stuff. I have a lot of projects I want to do. So it’s just one way to gain some knowledge
Tough question without drawings and AI Technical specs.
Is the six lug system designed for accuracy or Artic Warfare?
I think one key to accuracy is the epoxy bonding of the receiver to chassis and probably the tolerances to which the parts are designed and manufactured to along with QA and QC.
I know that was the feature I most liked when I purchased my AIAX this year.
You pay for the increased time to do all things to increased standards and QA/QC.
Weatherby introduced the 9 lug bolt for pressure retension, the Weatherby 6 lug Bolt is for non-Weatherby cartridges.
Can you shoot a Weatherby 300 Magnum in another action, sure, but the bolt lug surface has to be sized to handle the stress from firing along with the correct material.
But so far no one I know has used the Weatherby 300 Magnum as a Sniper Round!
The Winchester 300 Magnum appears to rule the roost.
I have a Rem Model 7 in 300 SAUM for hunting and it’s too light to shoot on the range but some Rem Law Enforcement models have been chambered in 300 SAUM but most now use the 300 Win Short Action Magnum.
So the more lugs, the smaller the lug can be, think of a single lug to hold the pressure, obviously it has to be big.
Weatherby wanted his Mark V to handle the increased pressures of his proprietary ammunition and of the handloaders who were testing the bounds of action strength.
I have only purchased one Weatherby Vanguard with 2 lugs in 30/06 having no desire to shoot the Weatherby 300 Magnum.
Now even the Vanguard is chambered in 300 Weatherby, so 9 lugs or 2 lugs, each can handle the pressure.
The Model 7 in 300 SAUM is for bear after 140gr 7mm-08 Nosler failed to break the off side shoulder of a small black bear from a Rem Model 7SS.
-Richard
Is the six lug system designed for accuracy or Artic Warfare?
I think one key to accuracy is the epoxy bonding of the receiver to chassis and probably the tolerances to which the parts are designed and manufactured to along with QA and QC.
I know that was the feature I most liked when I purchased my AIAX this year.
You pay for the increased time to do all things to increased standards and QA/QC.
Weatherby introduced the 9 lug bolt for pressure retension, the Weatherby 6 lug Bolt is for non-Weatherby cartridges.
Can you shoot a Weatherby 300 Magnum in another action, sure, but the bolt lug surface has to be sized to handle the stress from firing along with the correct material.
But so far no one I know has used the Weatherby 300 Magnum as a Sniper Round!
The Winchester 300 Magnum appears to rule the roost.
I have a Rem Model 7 in 300 SAUM for hunting and it’s too light to shoot on the range but some Rem Law Enforcement models have been chambered in 300 SAUM but most now use the 300 Win Short Action Magnum.
So the more lugs, the smaller the lug can be, think of a single lug to hold the pressure, obviously it has to be big.
Weatherby wanted his Mark V to handle the increased pressures of his proprietary ammunition and of the handloaders who were testing the bounds of action strength.
I have only purchased one Weatherby Vanguard with 2 lugs in 30/06 having no desire to shoot the Weatherby 300 Magnum.
Now even the Vanguard is chambered in 300 Weatherby, so 9 lugs or 2 lugs, each can handle the pressure.
The Model 7 in 300 SAUM is for bear after 140gr 7mm-08 Nosler failed to break the off side shoulder of a small black bear from a Rem Model 7SS.
-Richard
Think about going from 2 to 6 lugs. Three times (300%) as many so they could reduce each lug contact area by a significant area but still increase the overall area by a significant percentage. The reduced amount of contact on each lug is what makes it easier to lift the bolt. The three lug design is used to have the 60 degree lift compared to 90 degree for 2 lug designs.
BTW, my 2012 AW has three lugs, standard bolt face. The magnums had 6 lugs. I don't know when they went to 6 lugs for all, probably during the switch barrel design change.
BTW, my 2012 AW has three lugs, standard bolt face. The magnums had 6 lugs. I don't know when they went to 6 lugs for all, probably during the switch barrel design change.
Yes the 6 lug came back to the non magnum actions with the AT, they were in the original rifles also (the first design).
Sorry I’m a bit late to the hat discussion. I’ll have to find mine. I got it when I was in the UK last year. On mine, where it’s embroidered “finest sniper rifle” or whatever it says.... rifle is spelled wrong lol.
next thing, I have an AXMC, and I want to put a short(16”) barrel on it. Does anyone have one they can throw on, and get me a total overall length? Thanks
next thing, I have an AXMC, and I want to put a short(16”) barrel on it. Does anyone have one they can throw on, and get me a total overall length? Thanks
You can't run a 16" tube with the full length axmc handguard you will need to find one for a axsa which is 13"...I already went down this road last year I think you can get away iirm with 17.5 with the factory length axmc 16" handguard...I guess technically you could run the 16" tube but like only 1/8" will be sticking out of the handguard
Now that you say that, I remember you talking about that. Thanks for the info. With the regular MC handguard, does 17.5 give you enough to grab on to to tighten the barrel?
Don’t you have your MC in hand? The math is easy. Measure the length of the handguard (~16”) then add the tenon length (1.5”) and muzzle thread length (0.6”). Then add however much you want to stick out.
Don’t forget with the AX series you can remove the handguard when installing and uninstalling the barrel. It’s only 2 screws, so it’s not a big hassle to remove it. That way you could have an 18.25” barrel that you could still hand tighten, but only sticks out the front enough for the threaded muzzle shoulder to clear the handguard.
Maybe my search skills are lacking. What's the shortest usable barrel length one could fit in an ax chassis with 16" handguard for a rem700? Preferably with exposed threads
What are you looking to have on the end? A brake, a threaded break ready to accept a moderator. If an independent moderator, what moderator.... is it end of barrel or does it reflex down the barrel at all?
Barrel tenon length + handguard length + muzzle thread length
Clubsportmark, my current plan is a 20" barrel contoured for an aem5, which reflexes about 2.5" from the muzzle.
Sam, I should have known it would be that simple. I didn't know if the handguard had a nominal length like some on the market do. Some quick math says I should be ok, but barely.
Sam, I should have known it would be that simple. I didn't know if the handguard had a nominal length like some on the market do. Some quick math says I should be ok, but barely.
Sitting at 700yds. Wind was fairly calm this afternoon so made it a little easier to connect with the smaller shaped steel.
He’s north of me.
I used to fish in that area a lot.
Those pics look a lot like my coastal Oregon spots.
Last edited:
Its a tough place because the wind. All the places I can shoot longer distances are set up for shooting across valleys. The wind is never consistent, and hardly ever calm.
I ended up staying until it started getting dark. All in all it was a great day. Was only holding .5-1.4mil for wind at 700yds.
I ended up staying until it started getting dark. All in all it was a great day. Was only holding .5-1.4mil for wind at 700yds.
That's good..a static range doesn't try your skills very much
Range date with the new girl went well. I think I’ll have a second date with her tomorrow 
found some good nodes right where others found them so I’m gonna start the jump tests with the VLD’s. And do a ton of dry fire before hand because wow, it’s a whole different animal from the TT 2 stage diamonds I’m used to.
found some good nodes right where others found them so I’m gonna start the jump tests with the VLD’s. And do a ton of dry fire before hand because wow, it’s a whole different animal from the TT 2 stage diamonds I’m used to.
Range date with the new girl went well. I think I’ll have a second date with her tomorrow
Indoor??? Wtf is this bush league?
Indoor 100yd range that I have a membership at with a free Labrador, hell yeah. Makes load dev super easy. And I don’t have to freeze to death in the harsh Colorado winters
and it extends my shooting window to 8pm instead of 4pm or whenever it gets dark now
Indoor 100yd range that I have a membership at with a free Labrador, hell yeah. Makes load dev super easy. And I don’t have to freeze to death in the harsh Colorado winters
Sorry rechecked my notes...18.5-18.75" prolly to play it safe overall length would get you enough for wrench flats and .6ish muzzle threads...
I said screw it and just went back to my 20" win tac barrel
Thank you for your blessing good sir
Edited to add: I’m not cool enough for NV yet. I want to eventually get a PVS 30 or something cool for the AI lol
Last edited:
@Huskydriver what model of NVG are you running in the picture? I’m on my 3rd set of PVS 31’s and still they are garbage compared to that. Two out of the three have a honey comb and it drives me nuts.
View attachment 7440922
I haven’t seen it talked about in awhile, but while I had everything disassembled for my chassis conversion I swapped cross bolts out on my Spuhr. It’s a decent feature for A.I rifles because we always have a 4mm Allen on our person.
I called Mile High to get the specific size for my particular Spuhr, because there are 2 sizes, then I ordered the 4 bolts from bolt.com for less than $5 shipped.
Just wanted to bring the topic backup for some that haven’t thought about it.
Edit: I know it’s dirty, it’s always dirty
What is this scope mount ?
Is there a particular reason everyone uses Spuhr mounts on their AI? Besides the fact they are super rugged
