All dressed up with no place to go...
My GTAC AXMC conversion finally arrived. A little weather on the east coast and it was stuck in New York for a week. It took all of 15 minutes to install and wouldn't you know it, despite having 87 gazillion parts, no decent AR grips. Oh well, maybe Amazon can deliver quickly or I'll "suffer" this weekend with a crappy hard plastic grip.
ETA - First pic is how it arrives and was poor lighting, the unit is Dark Earth. Second shows it installed on a Dark Earth AX.
My GTAC AXMC conversion finally arrived. A little weather on the east coast and it was stuck in New York for a week. It took all of 15 minutes to install and wouldn't you know it, despite having 87 gazillion parts, no decent AR grips. Oh well, maybe Amazon can deliver quickly or I'll "suffer" this weekend with a crappy hard plastic grip.
ETA - First pic is how it arrives and was poor lighting, the unit is Dark Earth. Second shows it installed on a Dark Earth AX.
Attachments
Last edited:
All you AXSR guys that are looking for bolt bodies, EO has them listed on the site now to backorder. I'm sure they won't last long when in stock so I would pre-order/backorder them if your looking.
Fun Fact #2: So are the AXSR forends.
I was looking at the prices for the AXSR assemblies and the FP/Shroud parts. I’m wondering if the “assembly” is just the bolt body (rather than the complete assembly like with the MC) and the FP/Shroud part is then also required to make a completed assembly (bolt body, shroud, FP). ...which is what it seems like and would put a complete AXSR bolt assembly way more than a complete AXMC assembly.
Looks to me the bolt body is by itself. Just like the AXMC bolt bodies. Same pricing at $681 for the MC and SR. The firing pin and shroud assembly are also the same pricing as the AXMC. Both at $510. So both those together would get you the complete setup. Both for the AXMC and AXSR. Pricing didn't change.
If your looking for a complete SFP drop in and go assembly for the AXMC they are $860. But the bolt bodies themselves and parts individually are the same for the MC and SR.
I was just thinking that myself about the luna location. that RRS carbon weave though.......... droool...
It's on the Raptar rail to provide IR illumination for a 2124-LR. It almost felt dirty putting China on that gun, but it was functional.
Liberty's Defense.
Honestly, I never owned a cover until 2020. I bought one these to try out, then I ordered 7 or 8 more. It's made of all sorts of mineral and rock so it won't melt on you, and it locks up tight.
I'm a believer in this brand, but I'm bias.
I like what I see and reviews are fantastic, the price is a bit alarming but I might give one a whirl for the Ultra 7 can.
Not the best, but fun to get out the new AXMC out and put some down range between shifts at work.
Attachments
Last edited:
Hands down my favorite rifle. Just need to get them bolt body’s in from EO now.
The Spuhr mount finally delivered this week but I'm still expecting a few more things. I've decided to sell the B25 and MPA mount. The USO is an incredible optic but it's frankly too much glass for this feeble old man.
Last edited:
My new Kreiger 22cal heavy varmint barrel for a 22GT build. She fills the void of the forend nicely I’d say
This is true 
might just use the axle from under my pickup next!
might just use the axle from under my pickup next!
One day..........discipline equals freedom.....working on being disciplined so that one day I can have the freedom to get a rig very similar to this
Taken at MileHigh today (AXSR FDE top, ASR bottom)
Serious question guys. I haven't ever shot 338LM and the AXMC came with the factory barrel and bolt, so set up to send those downrange. I know the fundamentals are key for bigger stuff and have been working one that with my AX and now the MC. What factory ammo has performed best for you guys out of the factory barrels? With ammo prices so high, and being in this fucktard state, I don't want to buy the wrong stuff.
What are your ammo suggestions for factory 338LM 27" factory barrel?
Thank you in advance and stay safe.
Tack
What are your ammo suggestions for factory 338LM 27" factory barrel?
Thank you in advance and stay safe.
Tack
I've had good luck with the factory Lapua 250 gr SCENAR.
LAPUA 250 scenar or RUAG 250 target , mine holds .5 moa @ 1000 yards with either
Just pulled up their info... $1k buy in, $200 annual (not bad and understandable on both), but they are only open on the weekend. That’s the rough part
Papa's got a brand new bag......
Accuracy Obsession AT for scale......
Accuracy Obsession AT for scale......
Anyone using a pelican case 1720 for a SA AX? How do you go about getting custom foam cut outs?
1720/3200 have pre-cut foam options from MH for $110 when you buy the case as well. I'd contact them and see if they will sell just the foam.
Anyone use an Atlas Super CAL on an AT? I'm thinking of picking one up for my AT and I'd love to see a picture of what the rifle looks like with the Super CAL mounted. Not for PRS style matches, will be used for prone shooting such as informal mid-range F-Class.
I've been through this thread and if there's a picture with this set up I missed it.
Thanks.
I've been through this thread and if there's a picture with this set up I missed it.
Thanks.
I think I'm at the point in this journey where I need to have an AI. I want this AI to be more of a functional sniper rifle than a PRS rig. I like my current 6.5CM Bergara/KRG just fine but I may want to explore .308 because I shot a lot of it in the Army and I want to relive my glory days lol. Some people buy Corvettes in their 40s, I want an AI (and a Porsche if we're being honest). I love the look of the AT with the thumbhole stock so that's what I'll aspire to purchase. Caliber is the only decision left. .308 20", .308 24", or 6.5CM 24"? Stick with the flatter shooting 6.5CM? Shooting will be movers out to 250, pop ups out to 350 and and steel out to 1000. Yeah, I could do this with an AR10 but why not make it more fun with an AI?
The fun part is that you don’t have to choose man. Why not snag all three barrels? Having to choose is soooo 1990
Yeah changing a barrel is as easy as changing a mag. Buy your first instinct and then keep an eye open for the other barrels you want. You’ll find one here in a week.
Crap, that's right! Lol for sure I will!The fun part is that you don’t have to choose man. Why not snag all three barrels? Having to choose is soooo 1990
Dear sir, what is wrong with buying a Corvette C3 just before my forties will start (39yo currently)
meanwhile saving for an AI MKIII....... which will arrive shortly after I get 40 ( may 2021 ).....what else do I need.....?
Nothing wrong with that at all my friend! I'd say you're Carpe'n those Diems.Dear sir, what is wrong with buying a Corvette C3 just before my forties will start (39yo currently)
what else do I need.....?
I believe I can help, sir... You're almost there though!Dear sir, what is wrong with buying a Corvette C3 just before my forties will start (39yo currently)
what else do I need.....?
Thanks mate
That’s the holy grail! Sorry for the off-topic, let’s get back to AI pic’s again!
I have a pair to go with my '89 Turbo TA... Ok NOW I'm done, haha!
