Just pulled up their info... $1k buy in, $200 annual (not bad and understandable on both), but they are only open on the weekend. That’s the rough part
Ya kind of weird they are only open on weekends. The scenery is beautiful
Just pulled up their info... $1k buy in, $200 annual (not bad and understandable on both), but they are only open on the weekend. That’s the rough part
1720/3200 have pre-cut foam options from MH for $110 when you buy the case as well. I'd contact them and see if they will sell just the foam.Anyone using a pelican case 1720 for a SA AX? How do you go about getting custom foam cut outs?
The fun part is that you don’t have to choose man. Why not snag all three barrels? Having to choose is soooo 1990I think I'm at the point in this journey where I need to have an AI. I want this AI to be more of a functional sniper rifle than a PRS rig. I like my current 6.5CM Bergara/KRG just fine but I may want to explore .308 because I shot a lot of it in the Army and I want to relive my glory days lol. Some people buy Corvettes in their 40s, I want an AI (and a Porsche if we're being honest). I love the look of the AT with the thumbhole stock so that's what I'll aspire to purchase. Caliber is the only decision left. .308 20", .308 24", or 6.5CM 24"? Stick with the flatter shooting 6.5CM? Shooting will be movers out to 250, pop ups out to 350 and and steel out to 1000. Yeah, I could do this with an AR10 but why not make it more fun with an AI?
Crap, that's right! Lol for sure I will!The fun part is that you don’t have to choose man. Why not snag all three barrels? Having to choose is soooo 1990
Dear sir, what is wrong with buying a Corvette C3 just before my forties will start (39yo currently) meanwhile saving for an AI MKIII....... which will arrive shortly after I get 40 ( may 2021 ).....I think I'm at the point in this journey where I need to have an AI. I want this AI to be more of a functional sniper rifle than a PRS rig. I like my current 6.5CM Bergara/KRG just fine but I may want to explore .308 because I shot a lot of it in the Army and I want to relive my glory days lol. Some people buy Corvettes in their 40s, I want an AI (and a Porsche if we're being honest). I love the look of the AT with the thumbhole stock so that's what I'll aspire to purchase. Caliber is the only decision left. .308 20", .308 24", or 6.5CM 24"? Stick with the flatter shooting 6.5CM? Shooting will be movers out to 250, pop ups out to 350 and and steel out to 1000. Yeah, I could do this with an AR10 but why not make it more fun with an AI?
Nothing wrong with that at all my friend! I'd say you're Carpe'n those Diems.Dear sir, what is wrong with buying a Corvette C3 just before my forties will start (39yo currently) meanwhile saving for an AI MKIII....... which will arrive shortly after I get 40 ( may 2021 ).....
what else do I need.....?
I believe I can help, sir... You're almost there though!Dear sir, what is wrong with buying a Corvette C3 just before my forties will start (39yo currently) meanwhile saving for an AI MKIII....... which will arrive shortly after I get 40 ( may 2021 ).....
what else do I need.....?
Thanks mate That’s the holy grail! Sorry for the off-topic, let’s get back to AI pic’s again!
Pictures for the Thread ........Dear sir, what is wrong with buying a Corvette C3 just before my forties will start (39yo currently) meanwhile saving for an AI MKIII....... which will arrive shortly after I get 40 ( may 2021 ).....
what else do I need.....?
Hey guys. I have a factory AI 308 barrel that was chopped to 18” mile high with sub 50 rounds and a 24” 6.5 CM barrel spun up by mile high with sub 200 rounds. I like the handiness of the 308 but prefer the 6.5cm cartridge. I’m thinking of offing those barrels and maybe trying to loose a little weight with a rem varmit contour 6.5cm @ 18”. I see the price of barrels in the marketplace can be all over the place. What’s a realistic expectation and asking price for those barrels?
Yea I’ve been meaning to do it I just havnt yet.Which contour? 400-600 depending on if they are factory ai barrels with bartlein blanks and what muzzle threads pitch...
Before you go listing in the px might wanna check the new rules as you are supposed to be a paying member now to list I think
Those holes are likely where the forend attaches to the chassis under the hand grip in the pic aboveI was searching for the AX AICS and found this one. I've never seen a forend like this. It has a section with no keyslot with 2 holes. Is this normal?
View attachment 7580069
Oh I see that's the bottom! Haha was wondering WTFThose holes are likely where the forend attaches to the chassis under the hand grip in the pic above
Looks are subjective, there's no wrong answers here but I prefer the looks of the MC over the SR, and the AW over either.As much as I love my AXMC, the AXSR looks better. I know they shoot the same but I like the lever safety better than the bolt safety. The ability to resist buying one is going to be hard. Love the AT-X too but AXSR reigns supreme. Love the lefty!!! But it makes my brain hurt looking at rifles with the bolt on the wrong side .
They certainly are subjective. One day I would like to add an AW just because they are classic AI. I am adding the AR grip mod to my AXMC. Only thing I don’t like is the grip which that will rectify. Also adding the thumb shelf.Looks are subjective, there's no wrong answers here but I prefer the looks of the MC over the SR, and the AW over either.
You're just jealous that they make an AXSR for my disability.
Seriously though if I can shoot it half as well as you do I'll be proud.
I almost bought an AXSR in lefty when the email came that they were available. Then I thought the spousal unit would shoot me with the 2 other AI in the safe when she found out.
Damn! Who the hell needs barrel changes?!Hi, my name is Sig, and I, I have a problem......................
View attachment 7580427
How many AIs do some of you guys own?
Y'all only got two hands and a pair of eyeballs right?
You must be able to get setups for the 223Agreed. If AI will ever do a 223 I'll loose the two Remies. Already contemplating letting the 300WM set sail with talk of the AT short mag bolt face.
How many AIs do some of you guys own?
Y'all only got two hands and a pair of eyeballs right?
DAAAAAAAMMMMMMMMMM........Hi, my name is Sig, and I, I have a problem......................
View attachment 7580427
How many fingers and toes do you have?How many AIs do some of you guys own?
Y'all only got two hands and a pair of eyeballs right?
How many AIs do some of you guys own?
Y'all only got two hands and a pair of eyeballs right?
Yes. 1.35 to 1.2 @ 32"is that a straight taper?
I don’t see the problem. LolHi, my name is Sig, and I, I have a problem......................
View attachment 7580427
There is one glaring problem I see. No more storage slots for another one!I don’t see the problem. Lol
Serious question guys. I haven't ever shot 338LM and the AXMC came with the factory barrel and bolt, so set up to send those downrange. I know the fundamentals are key for bigger stuff and have been working one that with my AX and now the MC. What factory ammo has performed best for you guys out of the factory barrels? With ammo prices so high, and being in this fucktard state, I don't want to buy the wrong stuff.
What are your ammo suggestions for factory 338LM 27" factory barrel?
Thank you in advance and stay safe.
Tack