Shot the Sporting Rifle match in Raton today in the rain…. This is me deep cleaning the ol AI since it was covered in sand and mud. Ran flawlessly though and only had to beat the bolt open once 
Did it pass because throwing 8-9K plus in the mud goes against my better judgementPRB mud torture test.
Unless it's a loaner from AINA last thing I'd do to it as well. They beat the shit out of it too.
Did it pass because throwing 8-9K plus in the mud goes against my better judgement
Whatever it is, Homie has it 1-2 sizes too small.
Keep working on that “Lift Heavy, Lift Hard” there, Burt ….
Did it pass because throwing 8-9K plus in the mud goes against my better judgement
If you wanted to see the rest of the pics and article
Shot the sporting rifle match in Raton yesterday with @Krob95, 'twas indeed sloppy af.
I shot everything off a tripod so as not to get my tootsies muddy.
Also put my GoPro on for a stage if anyone is interested in what an example of one COF looks like.
Thank Christ for the target card feature on AB Kestrels. Turns out grease pen dope cards and rain don't jive too well.
I shot everything off a tripod so as not to get my tootsies muddy.
Also put my GoPro on for a stage if anyone is interested in what an example of one COF looks like.
Thank Christ for the target card feature on AB Kestrels. Turns out grease pen dope cards and rain don't jive too well.
@SuperBoot Would like to know who's back you scratched to get a 308 bolt for your AXSR???
Got a proof carbon 6.5cm barrel sitting on the shelf staring at me daily.
I'd do many, nasty, horrible things for a 308 bolt for mine right now.... It would be very untidy.
Got a proof carbon 6.5cm barrel sitting on the shelf staring at me daily.
I'd do many, nasty, horrible things for a 308 bolt for mine right now.... It would be very untidy.
@SuperBoot is clearly part of the Lance Criminal underground man. That’s the only explanation.@SuperBoot Would like to know who's back you scratched to get a 308 bolt for your AXSR???
Got a proof carbon 6.5cm barrel sitting on the shelf staring at me daily.
I'd do many, nasty, horrible things for a 308 bolt for mine right now.... It would be very untidy.
@SuperBoot Would like to know who's back you scratched to get a 308 bolt for your AXSR???
Got a proof carbon 6.5cm barrel sitting on the shelf staring at me daily.
I'd do many, nasty, horrible things for a 308 bolt for mine right now.... It would be very untidy.
All your worldly desires can be attained with enough Cope long cut and rip-its...
Thank you for coming to my TED talk.
It wasnt a back that he scratched...
Nothing is outside of your grasp with this as your fuel!
Drank 7-8 back to back one time at 1am just cuz and learned that there is such a thing as too much caffinee at once....
@SuperBoot We demand to see photographic evidence of your knees...
If you happen to come across another one... I will send you bulk rip-its from Oz.
If you happen to come across another one... I will send you bulk rip-its from Oz.
@SuperBoot We demand to see photographic evidence of your knees...
Interpret this photo however you see fit
How about an uncut tub of the original Jack3D?
Damn right they do.
#RideTheTiger
Glass tigers increase your BC while the canned tigers decrease your wobble zone.
#WaitingOnAWildTigerSponsorship
Need some help. I have an ae mk2 and want a better bipod solution than the atlas spigot.
Option 1 is skate board tape
2 is the replacement part from anarchy outdoors
3 is an arcs rail.
But I am.curious what that pic rail forward of the arca is in this picture from sawtooth rifles
Option 1 is skate board tape
2 is the replacement part from anarchy outdoors
3 is an arcs rail.
But I am.curious what that pic rail forward of the arca is in this picture from sawtooth rifles
Get the elite iron picatinny mount if it fits your rifle. I put one on a AICS and it has a nut or something that tightens up ans gets rid of all slop
Interesting looks like it may work.. Just briefly looked at the website. Do you have a picture of your setup?
The Anarchy spigot is a direct replacement for the factory bipod block, requires no fitting or tightening, and is offered in either picatinny or RRS/Arca. Works great.
Elite iron is closer to barrel axis. And a spigot without a tensioner is gonna have play. Fwiw
Just FYI the spigot I posted above on my AT has absolutely zero play whatsoever
Complete honesty I have absolutely no idea exactly how it mounts. Previous owner had on the gun when I purchased. But it’s rock solid. I use it all the time with my TBAC or Atlas. Then use the RRS Arca forend attachment for my tripod
Bruh
Il give ya like $500 foe the rifle
Doing some tripod work, getting ready for hunting season and fire forming a bunch of brass.
Correct. 13” forend clears a 16” barrel. The 16” forend clears 18” barrels
Everything looked good, till I saw that butt pad upside down...
Been playing around with it. I dig it upside down prone but any other position I'm thinking it's not my thing
