Recent content by Dreamweaver

1 week down 4 to go for my XLR luvin :D

Re: Signs of case head seperation --- Need advice. 45gr of V doesn't sound hot so you must be over sizing them? Is this for a bolt gun? If yes, set up the die by chamber checking them with firing pin removed. ~Mike

Re: Neck Trimmer I use a cordless drill/driver with my K&M neck turner for my BMG brass...works great. I've heard a cordless is better than a drill press as a press will/can turn it to fast. ~Mike

Re: hit the gong at a mile today !! <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tim3gun</div><div class="ubbcode-body"> JTG, we are south of Buckeye, AZ on hwy 85 twards I-8 and Gila Bend. </div></div> Have you guys got a 'range' out that way or is this a...

Re: A little too much pressure? I would back down until the primer stops flowing aka cratering.

Re: 50cal BMG reloading press what should I buy? Some pics...

Re: 50cal BMG reloading press what should I buy? I choose the Hornday press over the RCBS because i heard the dies were better. However after 2 months and 200 reloads i've already started aquiring some nicer CH4D dies. The main issue is resizing with the expander ball it makes rezizing very...

Re: Neck Turning question Just once.

Re: Time for a new Chronograph - Need addt'l ideas... <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ORD</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dreamweaver</div><div class="ubbcode-body">Check...

Re: What's your system for rotating brass? I get a reasonable size batch together of about 500 pieces all same headstamp, i am currently using WIN brass. I then have 2 medium storage boxes for my rifle brass labeled Trimmed and Sized and a # FIRE box. I process all the brass in one go and...

Re: Time for a new Chronograph - Need addt'l ideas... Also not impressed with my CED and also looking for a used 35P but its not easy. Check out the PVM-21 which NECO sell...i thinking this might be the only option on the consumer market. ~Mike

Re: Chronograph questions A cool v hot barrel may also effect you string numbers. What are you doing to control neck tension? Are you using match primers?

Re: Pressure spikes with varget?????? Please help Difficult to say without a chrono. My standard 175 SMK load is 42.2 of Varget in my DPMS 16" but this is only 2,420 fps which i find to be the low speed node. The high speed node was 45.0 which was 2,500 fps which is approaching the max for...

Re: Hand loading for Long range 1: brass case prep <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Carter Mayfield</div><div class="ubbcode-body">

Re: cutting a chamber to match brass dimensions This is correct...new brass WILL need to be fire formed to make it fit your chamber and there may be some accurancy issues as the brass does this. You can do this by firing it as a plinking/fouling round and 'waste' a bullet or you can look...