Recent content by montyb

Re: long range 223 here is an interesting article about going long with a .223. LINKY

Re: Good Guy List OutlawTen5 is GTG! good coms and smooth transaction.

Re: My 1/20th MOA Guarantee from GAP and here i was watin' for pictures of a 1/2", 1000 yard group...

Re: Once fired brass, FL resize AND neck bump? way to overwelm a new reloader so you can peddle your wares here without paying dues...

Re: Rem or Win i've a few Winchester Classics. in fact, one, the Laredo, is at the 'smith right now, getting a Lilja .264 barrel. the .375 AI has proven itself 100% and a .358 WSM fresh from getting rebored from 7mm WSM. i like my Remingtons too, but there is nothing wrong with the M70...

Re: Once fired brass, FL resize AND neck bump? if you set your die up so the shell holder contacts the bottom of the die when you size a case, that will produce full length sized brass. that brass SHOULD chamber in any rifle chambered for that cartridge. this is the easiest way to get sized...

Re: Once fired brass, FL resize AND neck bump? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: thefitter</div><div class="ubbcode-body"> Sorry. This is my maiden reloading attempt. The question is if I'm FL re sizing why would I also bump the shoulder. I was...

Re: Jewell trigger weight i happily run Jewell triggers set at 1# for hunting. i run them on everything i shoot a lot (that they make triggers for). where you get into trouble is mixing rifles with 4# triggers with your rifles that have light triggers.

Re: Cut vs Button...what's your fav 6mm, 6.5, & 7mm i've two Liljas, two Brux, one Krieger and one Hart in use, with another Brux and a Broughton on the shelf. i'd use any/all of them again.

Re: Kimber rifles i have a couple Montanas that i'm partial to. both will do .75 moa. i'll take that.

Re: Leather belt makers? PGS, sponsor on the 'Hide here has some nice looking belts on his web site. PAT'S SITE

Re: Jewel trigger safety isn't working in AICS <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HateCA</div><div class="ubbcode-body"> Grinding the pins isn't the correct way to do this. If the barreled action is sitting perfectly straight in the stock the...

Re: Jewel trigger safety isn't working in AICS i've installed Jewell triggers into AICS stocks simply by filing the pins on the trigger down, as making them shorter. both the head of the pin and "C" clip end, and the rivet on the safety "rocker" lever. just make sure to leave enough material...

Re: Is it bad to frequently remove the stock? the XCR Compact Tactical stock has an aluminum bedding block and it will return pretty well. just seat the action back against the recoil lug when re-assembling. the first "issue" that will pop up will be the action screws pulling through the...