Recent content by Skeeeter

Re: Twist rate for .22LR to shoot 60gr subsonics Our Quantum barrels use a 15.8 twist, and a short would like to see a 1:18 or perhaps even a 1:20 twist. What is more important about a rimfire barrel, is the grooves design and dimension and the bore dimension. Then of course there are well...

Re: Improving ruger 10/22 accuracy Number one by popular demand is to improve your trigger pull weight on a 10/22. Number two is to install good bedding. Our adjustable bedding system is adjustable to maximize any ammo's potential, you no longer need to try a bunch of different ammo to find...

Re: 1022 quad rail fit on butler creek folder? it isn't too bad of a little project to get one of those quad rails to fit with a bull barrel, even easier with a factory barrel, under and hour to mod the stock and fit everything just right, just need a dremel and a file and some good music. I...

Re: 1st Rimfire Build Up The 452's were modeled after the BRNO number 2's, so the inletting should be identical as long as you are not using the "American" 452 model that has the action screws which are different, but rather the original 452 with the forward barrel lug and action screw like...

Re: Ruger 10/22 Target? They shoot, some better than others out of the box. The barrel is a really solid hammer forged specimen and one of the most beautiful rimfire barrels in my opinion. That being said, the 10/22 needs to be bedded in order to realize its potential, and when you do, the...

Re: Ruger 10/22 Target? They shoot, some better than others out of the box. The barrel is a really solid hammer forged specimen and one of the most beautiful rimfire barrels in my opinion. That being said, the 10/22 needs to be bedded in order to realize its potential, and when you do, the...

Re: CZ is discontinuing the 452 next year. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cgv69</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skeeeter</div><div class="ubbcode-body"> One thing that...

Re: My new CZ 452 American 16" w/TAC65 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Irelander</div><div class="ubbcode-body">Just picked up a CZ 452 American 16" last night. I've been wanting a bolt action rifle that is threaded for my TAC65 suppressor. Since...

Re: CZ is discontinuing the 452 next year. One thing that can be clarified here, is that the barrel interchange sytsem will make changing barrels on this new action a breeze. Not an intended switch barrel design, but actually quite similar to the Ruger 10/22 in some respects where it goes...

Re: If you are considering a KIDD trigger............. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: WhiteKnight</div><div class="ubbcode-body">Can you buy one of his flat triggers for a non-Kidd mechanism? </div></div> Rimfire Technologies makes two versions...

Re: ruger 10/22 alaska trip <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: johnmac</div><div class="ubbcode-body">hey skeeter, How does the RT differ from the volquartsen? With volquartsen unit to lock the bolt open manually you just pull it open and push the...

Re: ruger 10/22 alaska trip Any aftermarket hammer drops right in and will be a big improvement, R/T has a selection of small parts to get the plastic housings working much better that supports the hammer of your choice, namely their presision hammer bushings and over size hammer pin or...

Re: My Squirrel Sniper and his weapon of choice.... <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: WhiteKnight</div><div class="ubbcode-body">Put an aluminum bull barrel and a silencer on it and then see how much fun he'd have :-) </div></div> And a quad rail...

Re: Remington .22 subsonics To me the Wolf MT has been completely worth it because if you miss a shot with something else you'll always know you would have made it if you were using Wolf MT. If you need expansion then just chuck them up in a lathe and install your own hollow point using a 60...

Re: How Are You Handling .22LR Availability I have found the Wolf MT and the CCI Standard velocity I need to run the sub sonic stuff with its preferred fodder, and I have barrels that shoot the inexpensive ammos like Federal 510 and such exceptionally well, and every time I get the chance I...