Search results

  1. 1

    6.8spc powders

    so H110 is magic for 300 black supers, but whats the best choices for 6.8 and 90gr gold dots? I got h110 and xterminater already. Don't mind waiting to find better in stock.
  2. 1

    Reloading Equipment WTT lapua 6.5 creedmoor srp brass **traded**

    1/4 of this is lapua to a barrel of mine. Rest is Hornaday and some federal and some mixed. I'm about to travel bet you're desperate due primers. If you have not found a trader by next weekend get back with me. Im not shooting 6.5 anytime soon
  3. 1

    Optics WTS Vortex PSTgen2

    FFP or SFP
  4. 1

    New Reloading Strategy

    You can get powder if you are patient vigilant. Reload around your primer supply
  5. 1

    Optics Vortex Viper PST Gen 2 3-15x44 ebr7c Mrad $700

    I've got a pair of 1-6 strike eagles.
  6. 1

    Help reloading 308 Match ammo

    Accuracy will suffer. Velocity will vary. You will have to sort and each headstamp will need die adjustment.
  7. 1

    OK to use CCI #41 in SRP .308 brass?

    Should be the same as a cci 450 srpm but take more energy from the striker
  8. 1

    Manufacturing primers

    SHOOT A LOT!!!! LOL
  9. 1

    Manufacturing primers

    so a friend was interested in this until we figured out how dangerous it really is. Had a low 6 figure investor on board. Friend has a business and land and insurance and machine shop. I'm a mechanical engineer so could figure out the mechanical side. Another friend knows a chemical engineer who...
  10. 1

    How is reloading .308 for Bolt vs AR-10 different?

    Bullets getting pulled forward depends on the gun. Many manufacturers use stiff springs, stiff extractors, heavy buffers and too much gas. Mine have lightweight carriers and adjustable gas and scs. I'll check some coal before and after loading a few times.
  11. 1

    308 bullets too short

    OP here The 125s are better than 2 inch groups at 100 yds in mixed brass and full progressive loading. Close to 1 inch with good brass and electric powder trickler. I'm satisfied. JP bolt and Hornaday 178eldx ammo had primer flow and stiff charging handle pull in 95 to 100F temps..with the gas...
  12. 1

    308 bullets too short

    I've been using speer 125 tnt on 308 ar10 for a while and like it. Just loading to 2.7 coal. Turns out I can drop a bullet in the chamber and put an empty brass behind it, close the bolt, and the bullet rattles around. What is the bad of this. I'm guessing gas and powder blow by the bullet...
  13. 1

    How is reloading .308 for Bolt vs AR-10 different?

    Use a faster powder for gas guns so the action won't be trying to unlock while the powder is still producing psi. Varget, Tac, etc for the heavies as the slowest. Light bullets use H4895, XtermVariety, 8208, 10x, etc or faster.
  14. 1

    Powder charge from SMK to TMK

    In 223 I have 24.6 to 24.9 gr of TAC doing pretty good with 77SMK in hotweather. I bought a box of 77TMK and wonder what the powder reduction should be considering the tip is eating up magazine length and therefore powder capacity. Book max for 77smk is 24.8gr of TAC.
  15. 1

    7SAW

    Bartlein gain twist. Type 1 chamber and I'm thinking about trying 151gr monoliths
  16. 1

    7SAW

    So RE16 is best with the heavies. Is varget best with the 150-168 class?
  17. 1

    7mm SAW

    Thinking of trying the 151gr monolithic bullets from PVA in a type 1 chamber. What powder should I get. Varget will probably build pressure, but I fear H4350 and RE16 will be too compressed with such a long bullet seated deep in the case.
  18. 1

    Hunting & Fishing New Hunting Bullets Available

    What happened to a competition 7mm? Like 151 Seneca?
  19. 1

    Reloading Equipment SPF 7mm Berger hybrids 180gr

    Wow I forgot about this thread. Yes all 1000 still available