Search results

Search the forum Search Articles
  1. P

    Once fired 338 lapua at grafs 159.99 per 100

    i just went out to my garage, and i couldnt find any to take a pic of, but i know ive seen the NT stamp on some of my Federal 300 winmag brass, along with some that have a HE stamp
  2. P

    338 lapua 250 scenar load

    does anyone know what powder lapua uses in their 250 scenar ammo?
  3. P

    45.8 Varget in a 308 w/ 175 SMK

    Re: 45.8 Varget in a 308 w/ 175 SMK flynlow, what cases and primers are you running? i running 45.6 varget in win cases with fgmm primers
  4. P

    Choate Ultimate Sniper

    Re: Choate Ultimate Sniper i also have a ultimate sniper on my sps 308 and have shot alongside acttacus at that shoot . we had the only 2 U/S stocked rifles at that shoot. think i still have the scar from leaning against the hot truck bed on that stage. the pic with the cinder block in it was...
  5. P

    need help deciding on my 260 build

    i want to know your opinions on my next rem 700 build. its gonna be a 260 . do you think i should use a long action so i can load the bullets long and mag feed them or use a short action and have to load them shorter? i have access to a fairly cheap long action i can purchase and part out to...
  6. P

    Loads for .260 /.243/ 6.5x47/6.5 Creedmoor

    Re: Loads for .260 /.243/ 6.5x47/6.5 Creedmoor milo do you mean .050 jump? think 1/2" is a little more than you meant
  7. P

    Pulled Bullets

    Re: Pulled Bullets royboy,i was thinking of getting some of the 220 pulls, how much are the bullets squeezed where its was seated in the case? what diameter are they in the contact zone?
  8. P

    .300 Win Mag Sticking Brass issue

    Re: .300 Win Mag Sticking Brass issue i too had a couple of my 300 mag cases stick when i was using the hornady spray, i switched to dillon case lube and havent had another stick. im using rcbs sizing dies for my lr rifle and hornady dies for my hunting rifle and both have stuck various stamp...
  9. P

    OCW: 300WM, 168gr VLD, H4831SC

    Re: OCW: 300WM, 168gr VLD, H4831SC heres the 200y 5 shot group i shot last week, its .640 average ctc. it was like a 3 minute group, as my buddy with his 338 lapua savage is really obnoxious when its next to you.
  10. P

    OCW: 300WM, 168gr VLD, H4831SC

    Re: OCW: 300WM, 168gr VLD, H4831SC my remington 26" hart, 1-10 twist, 300mag seemed to prefer 35inlb torque on the action screws, when i went tighter, the groups opened up. i use 76.8g h1000, 220smk, fed210m, win case. 2.97 ogive, which is at the lands in mine. it shoots .5 moa or...
  11. P

    338 Lapua Builder

    Re: 338 Lapua Builder diego, whats the load your running?, ill pass it on to my buddy kevin. he just got dies this weekend
  12. P

    Problems reloading VMax in 223

    Re: Problems reloading VMax in 223 i also use hornady dies and dont have any problems with the 55 or 60 vmax. i use benchmark and it works real good. its sub moa with 60's out to over 600y
  13. P

    45. acp loader BEWARE!!! , dangourous shit here

    Re: 45. acp loader BEWARE!!! , dangourous shit here i found my first one in my dillon, was loading along and it went clunk when it stopped, let the handle down wondering WTF and pulled the case and saw it had a small primer hole, i did the same thing, sorted thru my brass and pulled the small...
  14. P

    338 Lapua Builder

    Re: 338 Lapua Builder my buddy has a stock savage 10 ba in 338 lapua, it is a sweet great shooting rifle,and has a comfortable ergonomic stock. he hasnt started reloading yet but shoots black hills
  15. P

    R700 -223 12 twist What is your fav bullet?

    Re: R700 -223 12 twist What is your fav bullet? 60 vmax, rem cases,cci sr primers ,24.5g benchmark in my sons 700 223 1-12 26" sps its sub moa out to 650 yards , at 100 it makes little bugholes
  16. P

    300 winmag load question

    Re: 300 winmag load question its got a single feed ramp and theres no mag, so i can load them as long as i want the action was fully bedded by the previous owner and i have the action screws torqued to 65in pounds, which is what the m40 torque spec is. unfortunately i cant ask the last owner...
  17. P

    300 winmag load question

    im working up a load for my 300 win mag,1-10 26" hart heavy stainless barrel. im running h1000 powder, 220smk's ,cci lr , win brass and an oal of 3.50 and ogive of 2.916. 3.60 is the lands on this rifle. all loads were shot with the rifle in a leadsled shooting vice at 100 yards and were about...
  18. P

    AR 10 load data

    Re: AR 10 load data anyone got a load using imr4064?im gonna start reloading for my ar10
  19. P

    Photos Rem700 AICS

    Re: Rem700 AICS why do you have the brake on upside down?
  20. P

    Favorite powder w/ 60gr. V-MAX Bullet

    Re: Favorite powder w/ 60gr. V-MAX Bullet for 60g vmax, i use 24.5g benchmark in rem cases, cci primers, 2.26 oal rem 700 sps 223 varmint 1-12 twist
Top Bottom
Back
Home
Forums
Merch
Alerts