• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Search results

Search the forum Search Articles
  1. F

    Why "Hold" edge of plate?

    I see a lot of references to holding edge of plate when shooting steels. I get that if the plates are close in there's no need to dial in windage just allow for the wind. But you guys seem to do it at longer ranges, past 600? In the UK a lot of guys dial for wind and aim centre plate and adjust...
  2. F

    Sig 2400 BDX LRF & Garmin 701 Info

    Nobody, has that combination and can check for me? I thought there were loads of members using both? Cheers Mark
  3. F

    Sig 2400 BDX LRF & Garmin 701 Info

    If anybody has a Sig 2400 BDX LRF & Garmin 701, could they confirm something for me please. I have them both, when I am in ABU mode on the Sig and ping a distance I get the drops in the LRF and in the App on my phone. If I am in ABE mode and connected to the Garmin 701 I get the range and drops...
  4. F

    Cannot get 6.5 CM to feed in AI AXMC

    It does, but try getting them! They are not available here in the UK, are they in the US? Interestingly I tried a AICS mag in my AXMC Long action and it fed 6.5 CM perfectly.
  5. F

    Cannot get 6.5 CM to feed in AI AXMC

    MCHOG Rear 0.613" Front 0.589"
  6. F

    Accuracy International Picture Thread

    deersniper, I paid less than £100 pounds UK here. I broke 2 lots of Butler Creek style at £20.00 each, gave up and spent the wife's money on something to last.
  7. F

    Cannot get 6.5 CM to feed in AI AXMC

    Gentlemen I would like to thank everybody for their help. Got a new magazine today, works perfect. Also using the dimensions of the new one and a lip tool I made up, I have the old one working perfect as well. Result! Thanks again members of SH the best forum going! Cheers from across the pond Mark
  8. F

    Accuracy International Picture Thread

    deersniper, It's called a Sniper Hider made here in the UK. It is a protector for the scope, it screws on to the scope and opens by turning the knobs. You can have it open in stages to stop glare. I have a optical clear filter inside it to protect the front scope lens as I shoot comps in a giant...
  9. F

    Accuracy International Picture Thread

    Hi AXMC Yes its velcroed. With my arm length it was slow to retrieve rounds when mounted on the forend. I had to break cheek weld, where it is now its easy to reach the rounds. The quiver is rock solid, i used the stiff 50mm plastic velcro.
  10. F

    Cannot get 6.5 CM to feed in AI AXMC

    I have a new AI AXMC long action. I cannot get 6.5 rounds to feed out of the .308 mags. They just slam into the barrel face. I know some guys have got them to feed, any tips or ideas. Cheers Mark
  11. F

    Shooting bipod on sand

    Hi Guys I will be competing again this year in the Czech Republic Snipers Cup. The last 3 years and this year is at the same range...a giant soft sand pit. Every year shooters suffer from their bipods sinking in the soft sand after repeated shots. I have tried a rubber mat, then carpet stuck to...
  12. F

    Area 419 autothrow hopper question

    My V3 is also very tight, I might just take off a few thou on the sides.
  13. F

    CLR vs. Carbon

    Hi Can somebody tell me what CLR stands for? It's like everyone should know? We don't have it in the UK. Unless it's under a different brand name?
  14. F

    Vibrating Cases To Settle Powder

    What's everybody's thoughts on vibrating cases to settle powder so you don't compress loads? I have been doing it for about 10-15 seconds on a vibrating mat so I don't hear that crunching sounds when seating a bullet.
  15. F

    Wrong pressure and elevation on 701

    Hi As far as I know, but stand to be corrected a 701 does does use DA. It uses the presure reading at your location and temp with your loaded profile and location for results?
  16. F

    Wrong pressure and elevation on 701

    Hi Frank, Thanks for the reply. I have just done another check. The 701 is saying 1015mb & 462ft A pro weather station is saying 1007mb & 352ft. Not sure it would matter out to 1500yds? Cheers Mark
  17. F

    Wrong pressure and elevation on 701

    Has anybody else experienced the wrong pressure and elevation data on a Garmin 701? I have checked mine against kestrels, pro weather stations and other devices and it's always different. Does it really matter for calculating drops? Cheers M
  18. F

    Sig 2400ABX & Garmin 701 Problem

    Hi Guys I have had my Sig 2400BDX and Garmin 701 working for months. Yesterday they seem to have developed a communication error? When I used to range a distance the result and dope would come up in the rangefinder and be on the 701. Now I only get the dope on the 701. Range is displayed in the...
  19. F

    Cannot load profiles on Garmin 701

    Yes, I always update and check on all my devices every month.
  20. F

    Cannot load profiles on Garmin 701

    Okay guys I have tried everything. I have followed the instruction online from Garmin. Used the methods I used when I had a kestrel. I am using the latest AB profile uploader. I fill in the profile and save it. I connect the 701, profile loader see's it. I send the profile across to the 701...
Top Bottom
Back
Home
Forums
Merch
Alerts