Search results

Re: 300 Win Mag loads with 208 A-Max? jrob300, Let me know how that load works once you get to stretch it out pass 200 yards not that 5/8 at 200yds is not good enough. I just had my 300 win mag 700P barrel cut down to 22".

Re: How accurate are M1s/M14s? If you want accuracy you can just use a GI fiberglass stock and that is better than bedding it and cheaper most of the time. you can remove it for cleaning as much as you like. Shim or unitize the gas system and a trigger job you are good. If you want to go all...

Re: Cold Hammer Forged Barrels I do not own one but I am looking at building an AR15 type rifle and I would like to use one then. I hear they are very accurate and they last a lot longer and the steel is suppose to be denser, they use a cold hammer forged barrels on the M24 rifle.

Re: .300 barrel length. Advice wanted. I have 700P in .300 win mag and just had the barrel cut to 22" and added a muzzel brake I plan on getting a SRT suppressor. I hope I get time to shoot it this weekend.

Re: Federal 175gr Gold Medal Match in 7.62x51mm Does the NATO case create more pressure in the 7.62x51 case than the standard .308.

Re: Scope mount/M1A crazy bay, I have the Smith Enterprise scope mount, low mount rings .25" (can still use iron sight in a pinch) and a smith cheek pad with the Leupold MK4 2.5-8x36 MRT scope and I am pretty happy with it. I had the springfield mount and it sat a lot higher. I am sure if...

Re: M1A accuracy tips Mumbles, If that is a US GI synthetic stock you have and it fits tight keep it and you will not need to bed the stock, all of the good stocks for the M14/M1A that they have now you do not need to bed it. get a good shimm kit for the gas system (Smith Enterprise has...

Re: M1A OR Bolt Gun? M1A, I think you will be happy with a M1A set up by SEI in a good GI synthetic stock, I am.

Re: Manners prototype M1A stock Nice stock, I hope it will not need to be bedded.

Re: Sig P220 Match I would try a P220 SAO if you do not want to come up with the cash for the P220 Match, from what I hear the standard P220 is pretty accurate also. The standard SAO has a pretty nice tigger pull from the factory plus you will not have to deal with the fat wood grips.

Re: Melonite extending barrel life? Tim8654, AZPrecision I have my barrel and gas system on my M1A heat treated with the melonite treatment. It is not warped or chipping and seems to be wearing pretty good and it is pretty accurate so far. I have only put maybe 120 rounds through it so far.

Re: New Barrel on M1A Scout ? Jaeger_308, I was just wondering is it not shooting that good and what type of ammo are you using. Have you had the gas system unitized, had a trigger job. I think a new barrel will help but you will need to do all the accuracy mods for best accuracy gains. If...

Re: Bolt-action 'flash-hider' addition? Cixelsyd, OK, I know what you are talking about know that you put it that way. I have one on my M14 type rifle, I was thinking of a major problem, I know the sound not a problem. Thanks

Re: Bolt-action 'flash-hider' addition? sr15match, Other than the ringing like a tuning fork any othe negatives, because I have one being installed on my 700PSS in 300 win. mag, because I want to use the DC sound suppressor also.

Re: USO/FOXPRO Phoenix NRA Show augnmike, Are say it is going to be in Phoenix Arizona, if so where is it going to be in Phoenix.

Re: Leupold M2 Knob Question I have the M3 on a MK4 3.35-10X40 M3 and the M2 knobs on a MK4 2.5-8X36 M2 and the M3 came with 3 BDC knobs and the M2 came with the BDC for the 168grn 308, I was asked when I bought the scope what round I used. The M2 I have is only the 2.5-8x36 MR/T, so I am not...

Re: M1A Project mattmansacto, You could try the factory stock you have or a nice tight GI synthetic stock and just get you a nice strap on cheek pad to help you get a better cheek weld. I had one of the springfield mounts and it was not a good mount and it mounts the scope up really high. I...

Re: 300 Win mag 208 grn A-Max Halfnutz, I got the data and it is good stuff. Thanks

I have a pss700 in 300 win mag and I was wondering, if anyone knows of a factory loading for the 208 A-Max in 300 win. I have the 190 grn federal and blackhills, but I have heard so much about the 208 grn A-Max. I do not reload yet.

Re: M1A standered and what are the 1.5-5x20 going for these days, is it that big of a price differance between the MR/T 2.5-8x36 Are you speaking of the mk4 1.5-5x20 scopes. I never new it was that big of a price differance between the 2. I think you can find a MR/T 2.5-8X36 M2 for less than...