Search results

Re: The body die Good going Chris. Well yesterday I had the chance to work with the new 'S' die. I used a fired case that was very hard to extract from my chamber and used it to set up the new die. Bumped the shldr. back 1 thou. and loaded 6 rounds. Took a ride to the range, and fired them...

Re: The body die Hi, I have brought my die down to where it is more than just touching the shell holder and it still will not size the base of the case as much as I need it to. As far as bumping the shldr. back, I was able to bump it back 1 thou. I called Redding and talked to a tech. and he...

Re: The body die The other FL die is of the same brand. Redding. I did measure the base of the fired case first. After sizeing with the FL case, it measures a little over 1 thou. more than the body die. All measurents of the case were taken first before I ever started to size. The only...

Upon shooting the other day, I found that it was very hard to extract the fired case. Well I new what I had to do when I got back home. The cal. is 223 Rem, the brass is Lapua, and I use the Redding Comp. neck size die set. So I used the body die to bump the shldr. back. Loaded a dummy round in...

Re: Is there any way to center my widage adjustments? Why can't you just go with something like the Burris signature zee rings and try the different inserts. I just had a similar problem and it worked out great for me. Good luck.

Re: Good Spotting scope? tRY OPTICS pLANET FOR A kOWA 662 WITH A 20X60X66 ZOOM FOR 750.00. gOOD DEAL, VERY NICE SCOPE.

Re: Do I have a problem with my S.S. ? Thank you SWFA. Im kicking it around.

Re: Figureing MOA Hey Lindy, thanks. That was easy enough. Was just sitting here with just the moa at different yds. and working on getting the trajectory. Then looking back at the chart to see if I had worked it out. Good to go.

Re: Do I have a problem with my S.S. ? Well I had the chance to try the scope at 200 and 300 yds. today and I still did not like the way the target looked when adjusting the parallex. I took two other scopes out with me for comparison. A Bushnell scopechief 20X variable and a Simmons WTC 18...

I just ran some data through a ballistic chart and came up with the following. It said that my trajectory at 300 yds. was going to be minus 16.7". The come up in MOA was going to be 5.3. How do you figure moa to get the -16.7".

Re: Do I have a problem with my S.S. ? Thanks guys for the great info. I am first going to try to refocus as told. I wish that info was put into the manual that came with the scope about how to set your eye piece by turnning your parralax to infinity first and then moving the eyepiece, but it...

Re: Do I have a problem with my S.S. ? Is this scope normally on the grayish side when viewing through it?

Re: Do I have a problem with my S.S. ? I definatly will try that. Thanks for jumping in.As stated, that's what was told to me. If that clears everything up, I can be a happy camper. But is this scope normally on the darker side, or will that get alittle lighter when the par. is corrected.

I had my 20x Super Sniper scope out for the first time since I got it. At the 100 yds. that I was shooting it at,the black target which is 4" in dia. with a 3/4" orange dot in the middle was not clear and I could not clear it up by useing the parallex knob. Now I have other scopes that are of...

Re: 6.5 creedmoor brass Thanks for the info.

Re: Using IMR4895 in place of H4895 for 168gr SMKs During my high power days all I used was IMR4895. 40.5 grs with a Fed. 210M primer, 168 SMK bul. in LC match cases. Rifle used was a Rem. 40X. Good luck with your loads. Still useing that rifle today, but it now sports a scope and shot off...

Hi, Im doing a little searching for a friend of mine who is looking to buy some 6.5 Creedmoor Hornady brass. He does not have a PC, so I thought that I could ask around for him. I was not aware that it was so hard to get, as I do not shoot that cal. nor know that much about it. Any help out...

Re: changing to mil/mil Thank you very much for the speedy reply.

I have the 20x42 super sniper scope. Can I get an elavation knob in mils and turn my scope into a mil/mil unit?

Re: Super Sniper 3-9x Is the SS mil/mil or moa/mil in the 20X.