Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
The site has been updated!
If you notice any issues, please let us know below!
So its a no go for just threading it on tight and it holes being out of alignment? Its a complete upper from PSA. There's not enough barrel thickness to have a shoulder and I don't want to go the adapter route.it gonna be either tighten it down hard with locktite or have the threads cut to time...
Does it matter if the brake for the silencer is timed or can it be offset? Got a yhm suppressor and putting it on a ar-10 308. There is not enough barrel to use the washers to time the adapter. Any ideas? Pics for what I'm talking about. Will only be shooting gun with suppressor on.
Lots of people giving advice on how to shoot. Maybe it's just the ammo. Try different ammo.
I have pistols that shoot bullets different. I've seen as much as 2 inches variance at 20 yards. Doing nothing different except changing ammo I have a change in POI. Sometimes left sometimes up or...
I let a guy that owns a machine shop put on a brake that had to be timed to allow port to face up. He did an outstanding job. That is what they do for a living.
Just an update.
I bought a wolf extra power spring and it helped just a little. That spring is WAY more powerful than stock. I swapped bolts from another nagant and that fixed the problem. Bolt now has sufficient resistance that it will not open up if I don't open it myself. My bolt fit the...
I've read multiple posts where guns with stiff bolts people cut off a couple rings on firing pin spring and it helped loosen it up.
I don't want to spend money on headspace gauges. The bolt shouldn't be that loose whether there is a round chambered or not.
I bought the gun from a dealer. As far as pulling the safety back its very stiff. I will check to see if the trigger is loose after its fired. After its fired is the only time there is any resistance to opening the bolt, but not much. The sear spring is tight. I'm not sure what the problem is. I...
My 91/30 bolt is loose to the point when I turn the rifle upside down and bearly shake it the bolt opens. Even does this with a round chambered. After I pull the trigger, it has some tension to it. Every other person complains of heavy bolt lift, but mine is sloppy. Any suggestions on a remedy?
Re: Wanting to build my first Savage and have question
Nothing wrong with a savage at all. That's just his opinion. I have built 2 guns on a savage action. One in 243 and other in 300rum. Both shoot great. One has a shilen barrel and other a McGowan. There are plenty of aftermarket parts...
Re: any 1911 gurus?
I assume you are talking about over travel of the trigger. If so, you can get an aftermarket trigger that has a set screw in it to adjust over travel. If your gun takes aftermarket 1911 parts.
Re: Disappointed in Kahles "Limited Lifetime Warranty"
I can see the fuss if the scope was not functional and had problems without user fault but this outrage is user fault and it should not be expected by any manufacturer of any scope to fix this broken scope. If that were the case, lots of...
Re: scope recommendations
what do you mean by small footprint? do you want a small objective? if wanting a camo scope look at the nikon coyote specials. A $1000 dollar scope for a gun that will only be used for 200 yards max and daylight only is way too much.
this is my second build on a savage action. wanted to share this in case someone is trying to decide on a color for their rifle. I still have to bed the action.
McGowan barrel in 300 rum
duramax stock in od with black spider web
holland muzzle brake
sightron slll LRMOA
cerakote in flat dark...