Search results

Not exactly sure where to post this so hopefully here. Thought I would share about a target camera I build a few years ago, well really it’s just a copy of the Bullseye target system. I hadn’t looked up the company in a while and now see the original owner sold out? and they have a new version...

Thanks everyone for the help and suggestions. I tried backing it down a little and seating the Noslers in a bit. Best results so far, well if I don't count flyers. :rolleyes:. 2660fps. I agree and am not one to dismiss technique or fundamentals, always room for improvement. Either way I think...

WOA SPR 18 Accuracy I have been trying to find an accurate load for my WOA SPR 18 inch barrel but am having no luck. Best loads have been around 1.5 MOA at 100 yards. I am starting to get discouraged, so I thought I would ask and see what others are thinking. Vortex 5-15x RRA upper (from last...

Not sure if this helps. But using the picture. 8.5inch wide paper measures .8 mil so 295 yards, rangefinder said 290. Accurate enough for me to estimate range. Burris: (from amazon) MIL - field of view: 112.0' at 1000 Yd/37.3 M At1000 M exit Pupil: 2.8 mm eye relief: 18 mm length: 2.1 inch...

I have been looking for the Vortex eyepiece for a while too, Come on Vortex!! I was checking out that other thread and saw the post about the Burris. Thought it wouldn't hurt to try. I do prefer the layout of the reticle on the Vortex being offset. Although, I was thinking of picking up a...

Thought I would share. I tried the Burris eye piece (Burris 626201 Spotter Eyepiece, 30X WA, Scr Mil) on my Vortex Razor spotting scope (RZR-A1). I did a simple test at the shooting range. White printer paper at 100 and 290 yards, well that’s what my range finder said. I didn’t spend too much...

Thanks guys! Yeah I had started to read that post before but then bugged out early. For some reason when I hear hog hunting I think of guys driving around on their trucks with AR’s and 15 flashlights. More of a pest control thing. Probably got that from tv or something.

Hi, A friend at the range invited me to go deer hunting with him this season, which I have never done. I usually stick to killing paper but am excited to go. Anyways I am hoping to get some advice on developing a 308 hunting load. I already have a supply of 168 Amax and 175 pulled SMK...

Re: Headspace measurement Thanks MitchAlsup for the response. Here is what I got with just the bolt no firing pin case 1. Almost can’t close. +.002 on the mic case 2. Maybe 3-5 pounds. +.002 case 3. 1-2 pounds. +.001 So would saying chamber dimension is .002 correct? Pushing back the...

I decided to spend more money on sending rounds down range and collect the necessary tools as I can. With my last two neck sized batches of reloads I had a bit of “crush fit” when chambering. The real issue came with 5 rounds that I didn’t feel comfortable chambering, too much force. I have...

I was given two unopened boxes of m118 from a friend of a friend. I read a little about it, cool read. think these will end up above the loading bench Here is a picture . Not pictured on top it says “disposal of fired cases shall be as prescribed by army regulations”

Re: Vortex zero stop windage? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fdkay</div><div class="ubbcode-body">So, you would only be able to dial for wind from one direction? </div></div> It would limit the adjustment in one direction. But I would set it so...

So the other day I was stupid and decided to pull my rifle out of the bag through the back. That is unzip a little and slide it out front to back. Resulting in spinning the windage turret, which I didn’t know at the time. After shooting about 5 rounds I realized that I wasn’t putting them all...

Re: AICS with DIY Multicam Paint job <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: blurry6</div><div class="ubbcode-body">I think it turned out pretty good,... </div></div> I would second that. Nice looking rifle

Re: Rem 700 AAC build <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jason bourne</div><div class="ubbcode-body">TheWolf, is it. It's made by a company called KRG. The product is called the "bolt lift". If memory serves, it was around 30.00 and it is sturdy as a...

Re: Vortex Viper HS 5-15x44 Mil-Dot Went to the range today and was looking threw my scope at 5x. I noticed three specks of dirt, tried to wipe them off only to find out it’s on the inside! Decided it must be on the back of the focus because it moves when I adjust it. I think I remember...

Re: Rem 700 AAC build Thanks guys. I really like the m40 stock. But remember this is my first precision rifle so I have no experience or knowledge to judge it on. I wanted/knew I had to get a new stock and decided on a B&C stock. The m40 fit my taste/style and budget so I went with it. So...

Re: Rem 700 AAC build Nice looking rifle. I guess I will play with reloading for a while before I do anything else to the rifle. I read it all over that money spent on ammo is way better but 100 rounds sitting in my room does not look as cool as a tacticool rifle

I bought a Remington 700 AAC-SD 308 earlier this summer and am really loving it. Here is my build so far Remington 700 AAC-SD 308 Nightforce 20 MOA rail Vortex precision low rails Vortex Viper HS 5-15x 44mm B&C m40 stock Harris swivel bipod I also installed a new spring to the stock x-mark...

Re: Vortex Viper HS 5-15x44 Mil-Dot Just checked on my shipping status and noticed the scope is now at a discounted price again. Said $447.74 and I was able to add 60 in my cart. Little better than $499 but not as good as the first dealer / introduction price of $399