mpr

  1. S

    Accessories Christensen Arms MPR long action chassis

    https://www.gunbroker.com/Item/904994255 See gun broker link for pricing, but may be willing to bypass gun broker This is a Christensen Arms MPR folding Chassis that came off of a long action 300prc (only 18 rounds fired), THIS WILL FIT LONG ACTION REMINGTON 700s Like new no defects or...
  2. D

    Bergara build question

    I was curious if anybody out there has done this or thought of doing this. I really like the Christensen arms mpr for its chassis (lightweight and folding stock) but to save cost and arguably a better rifle, though about dropping a bergara into a Mpr chassis for rem 700 and clones. Only...
  3. aroddc3

    Firearms Used Christensen MPR 6.5 Creedmoor 22" Carbon Fiber Barrel

    CF barrel. Shoots 1/2 to 3/4 consistently with Hornady American Gunner factory ammo i.e. the cheaper stuff. Shoots even better with hand loads or match factory ammo. Looking for 1750 plus shipping. Would ship from Dallas, TX. (Scope, bipod and rings not included.) Just the rifle.
  4. L

    More Anschutz MPR results

    Picked up a Leupold 4.5-14x40 LRT (w/mildot) and mounted it using a B-Square rail adapter, and Leupold PRW low 30mm rings. All shots were fired using Wolf Match Target. Zeroing started at 40 yards and I can say I was pretty happy. 4 5 shot groups averaged .169". I then moved back to 100...
  5. H

    64 MPR bedding.....with VHB tape! No stock mods

    Part 4 in the series. Here's what I am attempting to fix with this mod, I am not trying to make the gun shoot better, it shoots better than I can now. I have been playing with this for a couple of weeks now. 1. The barrel actually touches the stock channel when on the bipod. 2. When I remove...
  6. H

    64 MPR flush cup sling swivels

    Part 3 in my mini-series Adding sling swivels to my Annie. I like flush swivels, and a lot of them, on my guns. I'm gonna add 6 to this one. This was the scary part, swiss cheesing the pretty stock..... Mix up some Accra-glas epoxy and glue them all in, make SURE they are all slightly...
  7. H

    64 MPR mag release extension - PITA Good Way

    Part 2 in the series. The "Cheap No-Drill" way works well; I used it for a while, scratched my gun up another time or 2 and said OK, I guess I can drill a hole in it now, I'm gonna keep it. Get your parts. 1. An 8-32 x 3/8" long socket head cap screw (longer can be cut to length) 2. An 8-32...
  8. H

    64 MPR -cheap mags

    Just found this on an old Anschutz forum post, these Savage 5 round mags (they say 10 round will NOT work, don't know why) work with minor modification, 2 little bumps need to be filed off. You can put your stock mag beside them and see the difference easily. $10 instead of $50...
  9. H

    64 MPR mag release extension - Easy no-drill way

    Part 1 in my series....:D 2 ways to make a mag release extension for an Anschutz 64, I'm sure many other .22's could be done this way, also. 2 ways because some of you won't want to drill a hole in your new $1000 rifle, at least until you get a few scratches on it, like me. First the no...
  10. H

    Anschutz 64 MPR mods

    I am gonna document some of the things I'm doing to my rifle, some of these mods could be done to other makes and models. Here's the specs on my rifle, I've had it about a year, but never messed with it until recently. Anschutz 64 MPR w/SS bbl Leupold 4.5-14X40mm 30mm tube Duplex reticule Side...
  11. L

    New Anschutz MPR results so far

    I picked up my new MPR yesterday. The trigger is outstanding. I may have to increase the pull weight to more closely match my other rifles. The first groups at 100 yards were right at 1" in somewhat windy conditions with Wolf Match. Ergonomics are very good so far. Updated with pics today: