Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Name explains it, but it's factory, never been adjusted just shot it. Feels around 2.5lbs no issues. Only trade would be for a Timney Howa 1500 Trigger. Does NOT come with trigger pins. I may have the factory bolt release and factory packaging, but will verify when I get home. Money Orders...
I have a Savage model 12 in 6.5CM. The rifle consistently shoots half inch 5 end groups at 100yards with hand loads. I put a Choate stock on a few months ago, and am very happy with the upgrade. I am ready to take another step with it. The rifle has the Savage Acuteigger, and the factory...
Building a new rifle. Ive used a jewel HVR trigger in my old prs gun and i love it. some people say they have problems. Mine personally has not yet. im going to get a new rifle (probably) on a mausingfield action. this gun will be solely for competitions. So as far as a R700 trigger... which...
https://www.remington.com/news/2017/remington-responds-60-minutes On February 19, 2017, 60 Minutes broadcast a segment about Remington Arms Company, LLC and two tragic incidents which occurred in 2011. In narrating the details related to each incident, 60 Minutes omitted and misrepresented key...
I recently purchased an HS Precision Pro 2000 HTR SA in .308. The previous owner had the trigger set at 1.5 lbs which is too light for the uses for which I will be using this rifle. I had a Remington armorer look at the trigger, but he was not able to adjust it. Can anyone give some help on...
Having put 300 rounds through my LRP now, I can honestly say the trigger seems to be the weakest component. I have 27 instances where my trigger pull was not fast enough to effectively reset the trigger and a slight living of the bolt, and reset and you are good to go. I have a slow and...
Ok so I just got my new stock and put my action into it and dry fired once and now everytime I cycle the bolt the firing pin is dropping. Not with any force at all. It's just going in one slow fluid motion with the bolt. So I took my action out and now it is STILL doing it and will not let me...
Anyone ever adjusted the factory trigger on a Steyr Scout rifle? Unlike in the user manual this guy claims it can be done. Steyr Scout Tips and Tricks Nice little hunting rifle, but I would love to be able to shave a few kilos of the triggerpull.
Ok guys, carrying a 9mm S&W Shield now. Loaded, with one in the chamber, safety on, carried right behind the strong side hip. Heres my problem: I tried a buddies apex trigger! So my question to you all is: should you or should you not modify your conceal carry pistol? I want to drop in the...
I know this thread is similar to many others on this forum, so please bear with me. My research hasn't turned up much information on this topic. I need advice on choosing a trigger. Factors in order of importance: 1) Reliability 2) Crispness/lack of creep 3) pull weight Rifle: -...
I have a practically new Timney 510 in my equally new Remington 700. The instructions that come with it suggest backing the screw on the front of the trigger assembly out to decrease trigger weight. There are 2 screws in that location, and the instructions do not indicate which one to...
I am trying to install an older rem factory trigger in an SPS tactical. X-Mark trigger came out fine..... When I go to put the rear pin in it is taking WAY to much force. I got it done, but now the bolt takes WAY to much force to close. Again, I got it done, but trigger wouldn't fire anyway...
I have a Blaser LRS II, I had the trigger factory set @ 2#, the question is I pull back slowly and I get slight movement, the A smooth clean brake, Is it normal the get slight movement? Thanks,Dean
i was wondering how hard it is to adjust a trigger on an fn pbr. i was a mechanic while i was in college, so i am fairly mechanically inclined. i just have never adjusted a trigger before. is this something that someone could walk me through? or do i just need to send itoff somewhere?
why does it seem they are so quickly replaced. what makes them suck stock, and Y does such a simple grouping of parts vary so much from stock to aftermarket?