Anyone had good results with their 308 using the amax 208g bullet for 600-1k shooting, Was going to Load the Amax Molly with Lapua brass and either vit n550 or reloader 17 which should yield 2,550-2,600fps with my 1 in 11 24in Blaser LRS2 barrel, Anyone able to share some info with the 208g amax in 30cal thanks, paul.
208g A-Max 30 cal.
- Thread starter paul T
- Start date
Re: 208g A-Max 30 cal.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1299481&page=1
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1299481&page=1
Re: 208g A-Max 30 cal.
No, the 208 amax is a horrible, horrible bullet. Nobody should use them.
Branden
No, the 208 amax is a horrible, horrible bullet. Nobody should use them.
Branden
Re: 208g A-Max 30 cal.
Ya I have 2 unopenned boxes of these junk bullets, I can't figure out why anyone would shoot these. I found some awesome muzzle loader .308 lead balls that have a BC of an incredable .001, awesome load for everything from ground squirrels to high plains jack a lopes.
Ya I have 2 unopenned boxes of these junk bullets, I can't figure out why anyone would shoot these. I found some awesome muzzle loader .308 lead balls that have a BC of an incredable .001, awesome load for everything from ground squirrels to high plains jack a lopes.
Re: 208g A-Max 30 cal.
I just found some more of my favorite muzzle loader balls, but these new ones are hollow points and molly coated
I just found some more of my favorite muzzle loader balls, but these new ones are hollow points and molly coated
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: freebird63</div><div class="ubbcode-body">Ya I have 2 unopenned boxes of these junk bullets, I can't figure out why anyone would shoot these. I found some awesome muzzle loader .308 lead balls that have a BC of an incredable .001, awesome load for everything from ground squirrels to high plains jack a lopes. </div></div>
You should send them to me, i'll properly dispose of them through my 20" mcgowen incinerator.
Branden
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: freebird63</div><div class="ubbcode-body">Ya I have 2 unopenned boxes of these junk bullets, I can't figure out why anyone would shoot these. I found some awesome muzzle loader .308 lead balls that have a BC of an incredable .001, awesome load for everything from ground squirrels to high plains jack a lopes. </div></div>
You should send them to me, i'll properly dispose of them through my 20" mcgowen incinerator.
Branden
Re: 208g A-Max 30 cal.
208 rocks in my .300WM...Though they are hard to get ahold of right now.....
208 rocks in my .300WM...Though they are hard to get ahold of right now.....
Re: 208g A-Max 30 cal.
Ya I noticed they are hard to find, about as hard to find as 200gr nosler accubonds. If I could have found the same amount of accubonds as A-maxes I probably would have bought them instead. But instead got the 2 boxes of 208gr A-Max bullets.
Ya I noticed they are hard to find, about as hard to find as 200gr nosler accubonds. If I could have found the same amount of accubonds as A-maxes I probably would have bought them instead. But instead got the 2 boxes of 208gr A-Max bullets.
Re: 208g A-Max 30 cal.
I have an unopened box of .308 200 gr. Accubonds I'll trade for your A Max's.
I have an unopened box of .308 200 gr. Accubonds I'll trade for your A Max's.
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: paul T</div><div class="ubbcode-body">Anyone had good results with their 308 using the amax 208g bullet for 600-1k shooting, Was going to Load the Amax Molly with Lapua brass and either vit n550 or reloader 17 which should yield 2,550-2,600fps with my 1 in 11 24in Blaser LRS2 barrel, Anyone able to share some info with the 208g amax in 30cal thanks, paul. </div></div>
208s are a bit on the heavy side for a 308, despite their great BC. The '06 and the .30 magnums are where they shine.
I'd be surprised if you can get 2550-2600 fps out of them without blowing out your brass in one shot.
155 Skinnies at 2950 are tough to be, out to 1k.
Chris
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: paul T</div><div class="ubbcode-body">Anyone had good results with their 308 using the amax 208g bullet for 600-1k shooting, Was going to Load the Amax Molly with Lapua brass and either vit n550 or reloader 17 which should yield 2,550-2,600fps with my 1 in 11 24in Blaser LRS2 barrel, Anyone able to share some info with the 208g amax in 30cal thanks, paul. </div></div>
208s are a bit on the heavy side for a 308, despite their great BC. The '06 and the .30 magnums are where they shine.
I'd be surprised if you can get 2550-2600 fps out of them without blowing out your brass in one shot.
155 Skinnies at 2950 are tough to be, out to 1k.
Chris
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChrisGarrett</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: paul T</div><div class="ubbcode-body">Anyone had good results with their 308 using the amax 208g bullet for 600-1k shooting, Was going to Load the Amax Molly with Lapua brass and either vit n550 or reloader 17 which should yield 2,550-2,600fps with my 1 in 11 24in Blaser LRS2 barrel, Anyone able to share some info with the 208g amax in 30cal thanks, paul. </div></div>
208s are a bit on the heavy side for a 308, despite their great BC. The '06 and the .30 magnums are where they shine.
I'd be surprised if you can get 2550-2600 fps out of them without blowing out your brass in one shot.
155 Skinnies at 2950 are tough to be, out to 1k.
Chris </div></div>
RL17 gets them into the mid 25's without much issue with normal barrel lengths. I like 'em in my 06 a lot @ 2875fps... not much on the hoof that will argue with that in this country.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChrisGarrett</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: paul T</div><div class="ubbcode-body">Anyone had good results with their 308 using the amax 208g bullet for 600-1k shooting, Was going to Load the Amax Molly with Lapua brass and either vit n550 or reloader 17 which should yield 2,550-2,600fps with my 1 in 11 24in Blaser LRS2 barrel, Anyone able to share some info with the 208g amax in 30cal thanks, paul. </div></div>
208s are a bit on the heavy side for a 308, despite their great BC. The '06 and the .30 magnums are where they shine.
I'd be surprised if you can get 2550-2600 fps out of them without blowing out your brass in one shot.
155 Skinnies at 2950 are tough to be, out to 1k.
Chris </div></div>
RL17 gets them into the mid 25's without much issue with normal barrel lengths. I like 'em in my 06 a lot @ 2875fps... not much on the hoof that will argue with that in this country.
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChrisGarrett</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: paul T</div><div class="ubbcode-body">Anyone had good results with their 308 using the amax 208g bullet for 600-1k shooting, Was going to Load the Amax Molly with Lapua brass and either vit n550 or reloader 17 which should yield 2,550-2,600fps with my 1 in 11 24in Blaser LRS2 barrel, Anyone able to share some info with the 208g amax in 30cal thanks, paul. </div></div>
208s are a bit on the heavy side for a 308, despite their great BC. The '06 and the .30 magnums are where they shine.
I'd be surprised if you can get 2550-2600 fps out of them without blowing out your brass in one shot.
155 Skinnies at 2950 are tough to be, out to 1k.
Chris </div></div>
Wow, you're really misinformed. I've shot upwards of 2600 from a short 20" barrel, and gotten quite a bit more than 1 reload from my brass. I'm not sure that I could get 2950 from 155's without tearing up brass.
Branden
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChrisGarrett</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: paul T</div><div class="ubbcode-body">Anyone had good results with their 308 using the amax 208g bullet for 600-1k shooting, Was going to Load the Amax Molly with Lapua brass and either vit n550 or reloader 17 which should yield 2,550-2,600fps with my 1 in 11 24in Blaser LRS2 barrel, Anyone able to share some info with the 208g amax in 30cal thanks, paul. </div></div>
208s are a bit on the heavy side for a 308, despite their great BC. The '06 and the .30 magnums are where they shine.
I'd be surprised if you can get 2550-2600 fps out of them without blowing out your brass in one shot.
155 Skinnies at 2950 are tough to be, out to 1k.
Chris </div></div>
Wow, you're really misinformed. I've shot upwards of 2600 from a short 20" barrel, and gotten quite a bit more than 1 reload from my brass. I'm not sure that I could get 2950 from 155's without tearing up brass.
Branden
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChrisGarrett</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: paul T</div><div class="ubbcode-body">Anyone had good results with their 308 using the amax 208g bullet for 600-1k shooting, Was going to Load the Amax Molly with Lapua brass and either vit n550 or reloader 17 which should yield 2,550-2,600fps with my 1 in 11 24in Blaser LRS2 barrel, Anyone able to share some info with the 208g amax in 30cal thanks, paul. </div></div>
208s are a bit on the heavy side for a 308, despite their great BC. The '06 and the .30 magnums are where they shine.
I'd be surprised if you can get 2550-2600 fps out of them without blowing out your brass in one shot.
155 Skinnies at 2950 are tough to be, out to 1k.
Chris </div></div>
RL17 gets them into the mid 25's without much issue with normal barrel lengths. I like 'em in my 06 a lot @ 2875fps... not much on the hoof that will argue with that in this country. </div></div>
Agreed. I was able to push the 208s up to 2705fps from my 24" .308.
When my '06 is done I will be giving them a try in it also with both RL17 and RL22 through a 28" tube.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChrisGarrett</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: paul T</div><div class="ubbcode-body">Anyone had good results with their 308 using the amax 208g bullet for 600-1k shooting, Was going to Load the Amax Molly with Lapua brass and either vit n550 or reloader 17 which should yield 2,550-2,600fps with my 1 in 11 24in Blaser LRS2 barrel, Anyone able to share some info with the 208g amax in 30cal thanks, paul. </div></div>
208s are a bit on the heavy side for a 308, despite their great BC. The '06 and the .30 magnums are where they shine.
I'd be surprised if you can get 2550-2600 fps out of them without blowing out your brass in one shot.
155 Skinnies at 2950 are tough to be, out to 1k.
Chris </div></div>
RL17 gets them into the mid 25's without much issue with normal barrel lengths. I like 'em in my 06 a lot @ 2875fps... not much on the hoof that will argue with that in this country. </div></div>
Agreed. I was able to push the 208s up to 2705fps from my 24" .308.
When my '06 is done I will be giving them a try in it also with both RL17 and RL22 through a 28" tube.
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Falar</div><div class="ubbcode-body">I was able to push the 208s up to 2705fps from my 24" .308.
</div></div>
That is serious speed from an 08! What's the load?
Thanks
Rath
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Falar</div><div class="ubbcode-body">I was able to push the 208s up to 2705fps from my 24" .308.
</div></div>
That is serious speed from an 08! What's the load?
Thanks
Rath
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rath</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Falar</div><div class="ubbcode-body">I was able to push the 208s up to 2705fps from my 24" .308.
</div></div>
That is serious speed from an 08! What's the load?
Thanks
Rath </div></div>
The results that I got as well as several others can all be found here:
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1299481#Post1299481
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rath</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Falar</div><div class="ubbcode-body">I was able to push the 208s up to 2705fps from my 24" .308.
</div></div>
That is serious speed from an 08! What's the load?
Thanks
Rath </div></div>
The results that I got as well as several others can all be found here:
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1299481#Post1299481
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: OneLunG</div><div class="ubbcode-body">208 rocks in my .300WM...Though they are hard to get ahold of right now..... </div></div>\
Hear that. I have searched high & low for these and others at times - no dice. Other Hornady amax bullets also seem to wind up in short supply, with many widely unavailable for months at a time. These are great bullets, but only if you can actually buy them. I wish they would fix whatever the supply side of the issue is.
--Fargo007
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: OneLunG</div><div class="ubbcode-body">208 rocks in my .300WM...Though they are hard to get ahold of right now..... </div></div>\
Hear that. I have searched high & low for these and others at times - no dice. Other Hornady amax bullets also seem to wind up in short supply, with many widely unavailable for months at a time. These are great bullets, but only if you can actually buy them. I wish they would fix whatever the supply side of the issue is.
--Fargo007
Re: 208g A-Max 30 cal.
According to a source inside Hornady, who asked to remain anonymous, the delay in the next shipment of 208 Amax bullets is due to a new design being implemented. The leadership at Hornady was "appalled" to learn of the blasphemous use of the 208 in .308's and 30-'06's, acknowledging the superiority and rightful claim of the 300WM, the firearm they were actually developed for. To that end, engineers have developed the world's first "smart" bullet.
These new 208's can actually identify the firearm they are fired from. When fired from a .308 or 30-'06, the shooter is exposed to dehydrated Pthirus pubis eggs. Once the user showers, the eggs are rehydrated and set in motion. This holistic and completely organic method was deemed preferable to the other solutions offered by employees at a company meeting which mostly involved bloodshed.
In anticipation of further untoward practices using bullets designed for superior weapon systems, this new technology has already been built in to the new 225 gr. 30 cal bullet.
One senior official was overheard saying, "That'll teach the bastards!".
John
According to a source inside Hornady, who asked to remain anonymous, the delay in the next shipment of 208 Amax bullets is due to a new design being implemented. The leadership at Hornady was "appalled" to learn of the blasphemous use of the 208 in .308's and 30-'06's, acknowledging the superiority and rightful claim of the 300WM, the firearm they were actually developed for. To that end, engineers have developed the world's first "smart" bullet.
These new 208's can actually identify the firearm they are fired from. When fired from a .308 or 30-'06, the shooter is exposed to dehydrated Pthirus pubis eggs. Once the user showers, the eggs are rehydrated and set in motion. This holistic and completely organic method was deemed preferable to the other solutions offered by employees at a company meeting which mostly involved bloodshed.
In anticipation of further untoward practices using bullets designed for superior weapon systems, this new technology has already been built in to the new 225 gr. 30 cal bullet.
One senior official was overheard saying, "That'll teach the bastards!".
John
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jrob300</div><div class="ubbcode-body">According to a source inside Hornady, who asked to remain anonymous, the delay in the next shipment of 208 Amax bullets is due to a new design being implemented. The leadership at Hornady was "appalled" to learn of the blasphemous use of the 208 in .308's and 30-'06's, acknowledging the superiority and rightful claim of the 300WM, the firearm they were actually developed for. To that end, engineers have developed the world's first "smart" bullet.
These new 208's can actually identify the firearm they are fired from. When fired from a .308 or 30-'06, the shooter is exposed to dehydrated Pthirus pubis eggs. Once the user showers, the eggs are rehydrated and set in motion. This holistic and completely organic method was deemed preferable to the other solutions offered by employees at a company meeting which mostly involved bloodshed.
In anticipation of further untoward practices using bullets designed for superior weapon systems, this new technology has already been built in to the new 225 gr. 30 cal bullet.
One senior official was overheard saying, "That'll teach the bastards!".
John </div></div>
Awesome....laughing hard right now!!!
-Pat
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jrob300</div><div class="ubbcode-body">According to a source inside Hornady, who asked to remain anonymous, the delay in the next shipment of 208 Amax bullets is due to a new design being implemented. The leadership at Hornady was "appalled" to learn of the blasphemous use of the 208 in .308's and 30-'06's, acknowledging the superiority and rightful claim of the 300WM, the firearm they were actually developed for. To that end, engineers have developed the world's first "smart" bullet.
These new 208's can actually identify the firearm they are fired from. When fired from a .308 or 30-'06, the shooter is exposed to dehydrated Pthirus pubis eggs. Once the user showers, the eggs are rehydrated and set in motion. This holistic and completely organic method was deemed preferable to the other solutions offered by employees at a company meeting which mostly involved bloodshed.
In anticipation of further untoward practices using bullets designed for superior weapon systems, this new technology has already been built in to the new 225 gr. 30 cal bullet.
One senior official was overheard saying, "That'll teach the bastards!".
John </div></div>
Awesome....laughing hard right now!!!
-Pat
Re: 208g A-Max 30 cal.
Greetings Gentlemen from a new registered user.
jrobb, You owe me a 67 degree Black Butte Porter. Most of it is now covering my keyboard.
A year ago I was talked in to buying a Rem 700 SPS 26" Bull in 308 to compete (friendly wagers) at 1000yds with a few friends here Phoenix. I thought I was doing alright with my scoped K31. Anyway I got it and added a Choate stock, Wotac 4x14x50, and Harris pod.
Loaded some Berger 168's for 600yds and 175's for 1000, conducted ladder tests at 500. Thanks for the info from this site. Found the node for my stick and came away happy.
Then read this tread concerning 208 A-Max's and was going to start the process all over again but was saved do the lack of said bullet. I did stumble on to some 200gr SMK's.
Sorry for the long winded intro. So my question is.....Any one work with 200's to 1000 and a bit beyond? I have RE-15 and 17 to play with.
Greetings Gentlemen from a new registered user.
jrobb, You owe me a 67 degree Black Butte Porter. Most of it is now covering my keyboard.
A year ago I was talked in to buying a Rem 700 SPS 26" Bull in 308 to compete (friendly wagers) at 1000yds with a few friends here Phoenix. I thought I was doing alright with my scoped K31. Anyway I got it and added a Choate stock, Wotac 4x14x50, and Harris pod.
Loaded some Berger 168's for 600yds and 175's for 1000, conducted ladder tests at 500. Thanks for the info from this site. Found the node for my stick and came away happy.
Then read this tread concerning 208 A-Max's and was going to start the process all over again but was saved do the lack of said bullet. I did stumble on to some 200gr SMK's.
Sorry for the long winded intro. So my question is.....Any one work with 200's to 1000 and a bit beyond? I have RE-15 and 17 to play with.
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: F4D</div><div class="ubbcode-body">jrobb, You owe me a 67 degree Black Butte Porter. Most of it is now covering my keyboard.</div></div>
Welcome to the Hide!
And I'm really sorry.... that's a horrible waste of a perfectly good Porter!
John
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: F4D</div><div class="ubbcode-body">jrobb, You owe me a 67 degree Black Butte Porter. Most of it is now covering my keyboard.</div></div>
Welcome to the Hide!
And I'm really sorry.... that's a horrible waste of a perfectly good Porter!
John
Re: 208g A-Max 30 cal.
I have a 300wm and they shoot awesome out of it. I can get them going about 3050fps and I have shot them out to a mile and I can keep under 1 moa out of them.
I have a 300wm and they shoot awesome out of it. I can get them going about 3050fps and I have shot them out to a mile and I can keep under 1 moa out of them.
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: F4D</div><div class="ubbcode-body">....So my question is.....Any one work with 200's to 1000 and a bit beyond? I have RE-15 and 17 to play with. </div></div>
F4D, I did some load work in my 308 with the 200gr Sierra Gameking, and the 200gr Nosler Accubond:
308 Win
Factory 700 VS barrel
1/12 twist
20.5" BBL
WW brass
CCI 200
200 Accubond, moly’d
2.82" OAL
RL-17
48 gr - 2485 fps, very low pressure
50 gr – 2620 fps
-------------------------------------------------------
200gr Sierra Game King BTSP
CCI 200
2.81 OAL
20.5” bbl
RL-17
50 gr – 2620 fps
51 gr 2670 fps
51.5 gr – 2700 fps
52 gr – 2730 fps
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: F4D</div><div class="ubbcode-body">....So my question is.....Any one work with 200's to 1000 and a bit beyond? I have RE-15 and 17 to play with. </div></div>
F4D, I did some load work in my 308 with the 200gr Sierra Gameking, and the 200gr Nosler Accubond:
308 Win
Factory 700 VS barrel
1/12 twist
20.5" BBL
WW brass
CCI 200
200 Accubond, moly’d
2.82" OAL
RL-17
48 gr - 2485 fps, very low pressure
50 gr – 2620 fps
-------------------------------------------------------
200gr Sierra Game King BTSP
CCI 200
2.81 OAL
20.5” bbl
RL-17
50 gr – 2620 fps
51 gr 2670 fps
51.5 gr – 2700 fps
52 gr – 2730 fps
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MontanaMarine</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: F4D</div><div class="ubbcode-body">....So my question is.....Any one work with 200's to 1000 and a bit beyond? I have RE-15 and 17 to play with. </div></div>
F4D, I did some load work in my 308 with the 200gr Sierra Gameking, and the 200gr Nosler Accubond:
308 Win
Factory 700 VS barrel
1/12 twist
20.5" BBL
WW brass
CCI 200
200 Accubond, moly’d
2.82" OAL
RL-17
48 gr - 2485 fps, very low pressure
50 gr – 2620 fps
-------------------------------------------------------
200gr Sierra Game King BTSP
CCI 200
2.81 OAL
20.5” bbl
RL-17
50 gr – 2620 fps
51 gr 2670 fps
51.5 gr – 2700 fps
52 gr – 2730 fps
</div></div>
...and to answer the question before it's asked... I found 200 SMK's and 200 SGK's to be *almost* ballistic equivalents out to 500 yds. in my 300WM. So MM's data should get you really close for starters.
John
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MontanaMarine</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: F4D</div><div class="ubbcode-body">....So my question is.....Any one work with 200's to 1000 and a bit beyond? I have RE-15 and 17 to play with. </div></div>
F4D, I did some load work in my 308 with the 200gr Sierra Gameking, and the 200gr Nosler Accubond:
308 Win
Factory 700 VS barrel
1/12 twist
20.5" BBL
WW brass
CCI 200
200 Accubond, moly’d
2.82" OAL
RL-17
48 gr - 2485 fps, very low pressure
50 gr – 2620 fps
-------------------------------------------------------
200gr Sierra Game King BTSP
CCI 200
2.81 OAL
20.5” bbl
RL-17
50 gr – 2620 fps
51 gr 2670 fps
51.5 gr – 2700 fps
52 gr – 2730 fps
</div></div>
...and to answer the question before it's asked... I found 200 SMK's and 200 SGK's to be *almost* ballistic equivalents out to 500 yds. in my 300WM. So MM's data should get you really close for starters.
John
Re: 208g A-Max 30 cal.
Thanks Gents. I've been following MM's load threads and I appreciate the info. I use RE-17 for the K31, 7.5x55 and I worked up some loads for a ladder and pressure testfor the Remmy. I'll post results and targets when it cools down a bit.
Thanks Gents. I've been following MM's load threads and I appreciate the info. I use RE-17 for the K31, 7.5x55 and I worked up some loads for a ladder and pressure testfor the Remmy. I'll post results and targets when it cools down a bit.
Re: 208g A-Max 30 cal.
Heading out one last time in the morning to see how these 208gr A-Max bullets shoot, if I am not happy I may be selling two brand new boxes. So lets hope for no wind out in the desert tomorrow morning.
Heading out one last time in the morning to see how these 208gr A-Max bullets shoot, if I am not happy I may be selling two brand new boxes. So lets hope for no wind out in the desert tomorrow morning.
Re: 208g A-Max 30 cal.
The one thing that concerns me about these bullets is if they are going to expand???
I put 3 of them through a 3/8ths steel plate at 400 yards. I had another steel target that I shot at 200 yards with 210 bergers and they barely dented it. So I may try going back to the bergers?????? I have never seen a bullet do this kind of damage.
The one thing that concerns me about these bullets is if they are going to expand???
I put 3 of them through a 3/8ths steel plate at 400 yards. I had another steel target that I shot at 200 yards with 210 bergers and they barely dented it. So I may try going back to the bergers?????? I have never seen a bullet do this kind of damage.
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: freebird63</div><div class="ubbcode-body">The one thing that concerns me about these bullets is if they are going to expand???
I put 3 of them through a 3/8ths steel plate at 400 yards. I had another steel target that I shot at 200 yards with 210 bergers and they barely dented it. So I may try going back to the bergers?????? I have never seen a bullet do this kind of damage. </div></div>
Some good data here:
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1742642&gonew=1#UNREAD
John
ETA: I use 208's exclusively for LR and ELR, but I have enough concern that I will hunt with JLK's this year.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: freebird63</div><div class="ubbcode-body">The one thing that concerns me about these bullets is if they are going to expand???
I put 3 of them through a 3/8ths steel plate at 400 yards. I had another steel target that I shot at 200 yards with 210 bergers and they barely dented it. So I may try going back to the bergers?????? I have never seen a bullet do this kind of damage. </div></div>
Some good data here:
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1742642&gonew=1#UNREAD
John
ETA: I use 208's exclusively for LR and ELR, but I have enough concern that I will hunt with JLK's this year.
Re: 208g A-Max 30 cal.
I shot a buck this year (dressed out at 120lbs) at about 40 yards with a MV of 2600fps with the 208 amax, and it didn't blow up. If anything, it expanded nicely. I saw no evidence of significant fragmentation in the gut pile, nor around the exit hole. Any bullet pushed fast enough is going to 'blow up' when it hits a deer. At the velocities that I shoot, i'm sure it'll hold up just fine.
FWIW, I shot a milk jug full of water at 700 yards and the milk jug popped nicely indicating to me that there was expansion.
Branden
I shot a buck this year (dressed out at 120lbs) at about 40 yards with a MV of 2600fps with the 208 amax, and it didn't blow up. If anything, it expanded nicely. I saw no evidence of significant fragmentation in the gut pile, nor around the exit hole. Any bullet pushed fast enough is going to 'blow up' when it hits a deer. At the velocities that I shoot, i'm sure it'll hold up just fine.
FWIW, I shot a milk jug full of water at 700 yards and the milk jug popped nicely indicating to me that there was expansion.
Branden
Re: 208g A-Max 30 cal.
I got great speed with 208's out of a 26" PSS(308) ...I just couldnt get the 1-12 twist to settle them down..wouldnt group for anything
I got great speed with 208's out of a 26" PSS(308) ...I just couldnt get the 1-12 twist to settle them down..wouldnt group for anything
Re: 208g A-Max 30 cal.
Even though I'm not using the load, the 208 is still supersonic at 1k with a MV of 2250fps. Now I've managed to get mine up to just shy of 2400 out of my 18" AR10 - work great!!!
Even though I'm not using the load, the 208 is still supersonic at 1k with a MV of 2250fps. Now I've managed to get mine up to just shy of 2400 out of my 18" AR10 - work great!!!
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dust_Remover</div><div class="ubbcode-body">No, the 208 amax is a horrible, horrible bullet. Nobody should use them.
Branden </div></div>
I agree. If anyone sees them in stock, don't bother wasting your time with them.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dust_Remover</div><div class="ubbcode-body">No, the 208 amax is a horrible, horrible bullet. Nobody should use them.
Branden </div></div>
I agree. If anyone sees them in stock, don't bother wasting your time with them.
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clay_James</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dust_Remover</div><div class="ubbcode-body">No, the 208 amax is a horrible, horrible bullet. Nobody should use them.
Branden </div></div>
I agree. If anyone sees them in stock, don't bother wasting your time with them. </div></div>
But please be kind enough to let me know where they have them. LOL.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clay_James</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dust_Remover</div><div class="ubbcode-body">No, the 208 amax is a horrible, horrible bullet. Nobody should use them.
Branden </div></div>
I agree. If anyone sees them in stock, don't bother wasting your time with them. </div></div>
But please be kind enough to let me know where they have them. LOL.
Re: 208g A-Max 30 cal.
Where on earth did you find 300 Mag Lapua cases? Didnt they can those a while ago?
Where on earth did you find 300 Mag Lapua cases? Didnt they can those a while ago?
Re: 208g A-Max 30 cal.
Ya, that has to be a pretty old box of 300winnie brass. I've also been told Lapua themselves didn't make that 300win mag brass that they sub'ed it out to someone else. Read that on another site and it was posted by a Lapua Rep.
There is no way you can use that many 208's at one time. You better send me a box of those so nobody accuses you of being piggish about them.
Ya, that has to be a pretty old box of 300winnie brass. I've also been told Lapua themselves didn't make that 300win mag brass that they sub'ed it out to someone else. Read that on another site and it was posted by a Lapua Rep.
There is no way you can use that many 208's at one time. You better send me a box of those so nobody accuses you of being piggish about them.
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: idahoshooter</div><div class="ubbcode-body">Where on earth did you find 300 Mag Lapua cases? Didnt they can those a while ago? </div></div>
The cases were sitting on the shelf of a very well known gun shop in the south of England, I was travelling on business and thought it would be rude not to stop by. Anyway saw them gathering dust next to some .338LM and snapped em up. It'll make you sick to know I got em for $70! (they were there that long they didn't have a price on them so they guessed at a figure!)
Doesn't look like the 208's have quite caught on yet in the UK so I've been able to get my hands on some fairly readily. Might be some time before the next batch appears tho....
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: idahoshooter</div><div class="ubbcode-body">Where on earth did you find 300 Mag Lapua cases? Didnt they can those a while ago? </div></div>
The cases were sitting on the shelf of a very well known gun shop in the south of England, I was travelling on business and thought it would be rude not to stop by. Anyway saw them gathering dust next to some .338LM and snapped em up. It'll make you sick to know I got em for $70! (they were there that long they didn't have a price on them so they guessed at a figure!)
Doesn't look like the 208's have quite caught on yet in the UK so I've been able to get my hands on some fairly readily. Might be some time before the next batch appears tho....
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: samson</div><div class="ubbcode-body">Jagged77, I think you're just teasing all of us. Those boxes are probably empty. LOL
</div></div>
LOL
You're a sucker for punishment - you know that???
Even though it meant opening two of the the boxes (if you don't open and play with the 'toys' inside they're worth more years later!) here's to show you they're the real McCoy!
The Lapua is going to be set aside for a new barrel
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: samson</div><div class="ubbcode-body">Jagged77, I think you're just teasing all of us. Those boxes are probably empty. LOL
LOL
You're a sucker for punishment - you know that???
Even though it meant opening two of the the boxes (if you don't open and play with the 'toys' inside they're worth more years later!) here's to show you they're the real McCoy!
The Lapua is going to be set aside for a new barrel
Re: 208g A-Max 30 cal.
Dang dude, why ya gotta be so mean!!! That's some seriously cold blooded sheet BUT since you already have those boxes open you might as well send me some. I would really hate to see them spoil now that you opened the boxes.
Dang dude, why ya gotta be so mean!!! That's some seriously cold blooded sheet BUT since you already have those boxes open you might as well send me some. I would really hate to see them spoil now that you opened the boxes.
Re: 208g A-Max 30 cal.
mmmm.. been trying to work out what to do with these... 1100 of them... still got a good 800 odd 200SMK's to get through before I even crack these open for the 300WSM!!
I bought enough projectiles a while back to last the life of the barrel.... I hate not being able to find components when you need them!
Cheers
mmmm.. been trying to work out what to do with these... 1100 of them... still got a good 800 odd 200SMK's to get through before I even crack these open for the 300WSM!!
I bought enough projectiles a while back to last the life of the barrel.... I hate not being able to find components when you need them!
Cheers
Re: 208g A-Max 30 cal.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ackley Improved</div><div class="ubbcode-body">mmmm.. been trying to work out what to do with these... 1100 of them... still got a good 800 odd 200SMK's to get through before I even crack these open for the 300WSM!!
I bought enough projectiles a while back to last the life of the barrel.... I hate not being able to find components when you need them!
Cheers </div></div>
The is nothing like being well-prepared. Smart move my friend.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ackley Improved</div><div class="ubbcode-body">mmmm.. been trying to work out what to do with these... 1100 of them... still got a good 800 odd 200SMK's to get through before I even crack these open for the 300WSM!!
I bought enough projectiles a while back to last the life of the barrel.... I hate not being able to find components when you need them!
Cheers </div></div>
The is nothing like being well-prepared. Smart move my friend.
