3-4 Way Adjustable Butt...finding the right one

[alongshot50]

My stock should be here soon A4.mac. I want an adjustable butt. I searched and searched. I like the Tubb but there are alot of repports of coming loose, I am building a .338 Laupa.
The Warner looks like a goo part but very close to tubb. I like the wheel adjustable on an H&S M24 type but they wont sell seprate from stock...Any suggestions on a wheel adjustable pad

 

[John L]

Re: 3-4 Way Adjustable Butt...finding the right one

This is the 3 way buttplate I use. It uses 2 screws to hold the length setting, never had it come loose. As you stated the Tubb unit does have a habit of coming loose. The Tubb unit uses only one screw and I replaced the one I had with the Masterclass unit.


http://www.masterclassstocks.com/accessories.html

 

[9H_Cracka]

Re: 3-4 Way Adjustable Butt...finding the right one

McM needed to know ahead of time that you are planning on putting something mechanical on the butt of the stock so that they can build up the glass accordingly.

Did you communicate this when you placed the order?

McGee makes a superior LOP adjustment hardware to the Tubb system BTW.

http://www.mcgeestocks.com/hardware.html

 

[alongshot50]

Re: 3-4 Way Adjustable Butt...finding the right one

I really like the looks of the Mcgees...A little tan ceraKote to kill the shine and it looks stronger...thanks

 

[Big Toby]

Get in touch with Chad Dixon at LongRifles,Inc.

[email protected]
605-490-2561
longriflesinc.com


He just developed a new adjustable butt system.

Had a link on his website but since the revamp on the hide it is not working.

 

[seanh]

One thing you'll want to do is invest in some large knurled thumb screws. It's not a problem if you only shoot from one position but if you regularly shoot from various positions, always having to adjust with an hex wrench sucks.