Who sells the keyslot QD socket?View attachment 8109477
ATX 6BR (switching to 6GT)
AXSR 6.5CM
Without Warning TMB muzzle brakes.
The king of brakes!
Does the AT-X have any weigh added to the rear to balance it out?
Who sells the keyslot QD socket?View attachment 8109477
ATX 6BR (switching to 6GT)
AXSR 6.5CM
Without Warning TMB muzzle brakes.
The king of brakes!
(I know you didn’t ask me but….) Got mine from Anarchy Outdoors.Who sells the keyslot QD socket?
Does the AT-X have any weigh added to the rear to balance it out?
Thanks to @MOUNTIC for a killer rifle. The 300 Norma did extremely well in the frigid temps out to 1 mile. Thanks again my friend!!
View attachment 8110128
Superb: how do I get me one of these Pls?Also proofed out my flat trigger shoe. Works and feels great.
Some "springtime in Texas" shooting today. Have not given the 338LM barrel much love lately, forgot how much of a hammer it is running 285's and 250's.
Also proofed out my flat trigger shoe. Works and feels great.
Big thanks to @Huskydriver for recommending to add some some texture on the face, I was just going to leave them smooth. Finger pad really "sticks" to the shoe now. Just have to throw some anodizing on to finish them up.
View attachment 8110343View attachment 8110344View attachment 8110345
Looks freaking fantastic can't wait to try one out buddy.
Meanwhile shooting in Utah today..... Weather still running 25 degrees below ave and it just keeps snowing every week......
View attachment 8110484
View attachment 8110485
How do you not get stuck with that much snow on the ground? Must have dual-lockers cause I’ve got an old XJ that I’ve been mobbing around with open-diffs and if the snow gets too deep you’re in trouble.Looks freaking fantastic can't wait to try one out buddy.
Meanwhile shooting in Utah today..... Weather still running 25 degrees below ave and it just keeps snowing every week......
View attachment 8110484
View attachment 8110485
How do you not get stuck with that much snow on the ground? Must have dual-lockers cause I’ve got an old XJ that I’ve been mobbing around with open-diffs and if the snow gets too deep you’re in trouble.
That’s really good to know, thanks.
That’s really good to know, thanks.
Can't wait to see the finished product!Some "springtime in Texas" shooting today. Have not given the 338LM barrel much love lately, forgot how much of a hammer it is running 285's and 250's.
Also proofed out my flat trigger shoe. Works and feels great.
Big thanks to @Huskydriver for recommending to add some some texture on the face, I was just going to leave them smooth. Finger pad really "sticks" to the shoe now. Just have to throw some anodizing on to finish
I'm running BFG KO2's. I'm gonna try airing down. Been trying to get out and shoot my AI for over a month now. Too much snow/ice/mud in certain spots. Airing down just might be the answer.I should add tire pattern does make a diff too but airing down you will gain a lot more traction and in snow you are at way less of a risk of slipping a bead
Unfortunately BFG KO2’s are the absolute worst tire for mud. Great tire no doubt, just the worst in mud.I'm running BFG KO2's. I'm gonna try airing down. Been trying to get out and shoot my AI for over a month now. Too much snow/ice/mud in certain spots. Airing down just might be the answer.
Yup... Pretty decent jack of all trades every where else but yes wet thick mud is no diceUnfortunately BFG KO2’s are the absolute worst tire for mud. Great tire no doubt, just the worst in mud.
I put that job on my to-do this weekend. Needs to be done in about 8-months
over the past few years youve posted enough pics..Cull the heard?? Never!
My son caught one of the Elite Sands cheating with the others!
View attachment 8109000
... race car shit?!?!A lil birdie told me there's a bad ass AI in the PX right now.
![]()
over the past few years youve posted enough pics..
my guy tells me you have all AI models in all colors or close to it
dont lie now
Man does that hood and color look familiar
do you rotate often or some never see the skyFull AI Rainbow, Old and New![]()
338 srI put that job on my to-do this weekend. Needs to be done in about 8-months. What can did you get?
do you rotate often or some never see the sky
So the red headed step child is trueOut of the AI herd, 4 of them have yet to be fired. A duplicate AWSM IN 338 Lapua (new kit in hard case), ASR Kit, AT in 6.5 or 308 I forget, lastly a Red ATX 2ND Version in 6.5 Creedmoor.
I'm probably going to get the 3rd version ATX Sage Green in 6mm Creedmoor soon as it's out.
Probably done on the AI side of things, less something new comes out.
So the red headed step child is true
Sheesh... Well shiite. Thanks for the heads up. Luckily I live in a desert, not much mud, but with this winter there's going to be plenty of it around here in the N. Nevada area for a while.Yup... Pretty decent jack of all trades every where else but yes wet thick mud is no dice
Those of you running 308 AXSR mags…
Y’all ever run into issues after reassembly where it doesn’t want to load more than 7 in the mag?
I took apart my three mags to clean em and after reassembly, they each wouldn’t take more than 7 rounds. They only go back together one way and I finger fucked it enough to get 2 of the 3 back to normal but can’t seem to get the 3rd mag working. I’ve cleaned plenty of mags and never had this kind of shit happen.
Anyone else run into this? ..or am I the only retard?
View attachment 8114466
Those of you running 308 AXSR mags…
Y’all ever run into issues after reassembly where it doesn’t want to load more than 7 in the mag?
I took apart my three mags to clean em and after reassembly, they each wouldn’t take more than 7 rounds. They only go back together one way and I finger fucked it enough to get 2 of the 3 back to normal but can’t seem to get the 3rd mag working. I’ve cleaned plenty of mags and never had this kind of shit happen.
Anyone else run into this? ..or am I the only retard?
View attachment 8114466
Yea. All I did was slide the base off, remove the spring assembly, wipe everything down, and slide the assembly back in the way it came out. It feels like the spring is caught up on something.You sure the follower/,spring isn't backwards?
Oh I did multiple times. Easily spent 30 mins trying to unfuck it. I’ve cleaned plenty of mags from a bunch of different platforms and never ran into this kind of issue.Ive had it happen with sig p220 mags. The spring wasnt into the follower quite right. Probably just take it apart and put it back together again and itll work
Me holding 1.2 at K&M at 500 with a 1/4 valueGetting a little dope last Friday. What a time. 20mph full value holding 1.6mils at 1k.
View attachment 8084981
Attended my first ever PRS match today. The AX did it's part, the shooter....not so much!
View attachment 8116190View attachment 8116191View attachment 8116192
I was thinking of going with a very similar colour scheme for mine. Committing to buying a Vision Forend and was trying to think of a colour scheme that'd match the Vortex.
What is rear end you have (butt pad attachment) haven’t seen before….
I know about the MEC Contact III. It is a really slick butt plate assembly. How it is connected to an AI is what I want to find outWhat is rear end you have (butt pad attachment) haven’t seen before….
I second that?…I know about the MEC Contact III. It is a really slick butt plate assembly. How it is connected to an AI is what I want to find out
I know Huskydriver mentioned it before, but if you have a chance at some point I’d love to see the bedding between your action and chassis…I guess we will never know.
Nah I kid - the previous owner was clearly willing to sacrifice it to attach it to the AI. It only uses half of the assembly, and only gives you height adjustment, not tilt etc.
I can take some pics if you guys would like, but in reality the AI adjustable butpad would make a lot more sense.
Thank you, you’ve been most accommodating! Sorry for the hassle, but the bedding and the butt stock pics will satisfy most everyone’s curiosity. Much appreciated.Yeah look, I hadn’t really had the time or desire to pull it apart on a whim, but I snuck out to the shed this arvo.
Warts and all - is it a perfect LRI-esque bedding job? No. I can confidently say it’s better than the factory bedding on both my AT and AX though. Bonus hacked up MEC buttstock pics.
View attachment 8118585View attachment 8118589View attachment 8118586View attachment 8118587View attachment 8118588
I know it was your first match so I'll cut you some slack BUT you are doing it wrong. It's always your gears fault, never yours.Attended my first ever PRS match today. The AX did it's part, the shooter....not so much!