ACMX broken extractor bolt disassembly

[Dredd_RSA]

Hi All,

I had an incident with my new AXMC 338 Lapua where the extorter clip broke the firs time I went to the range.

I have received a replacement one and am trying to figure out how exactly to disassemble the Bolt to be able to install the new one.

Anyone have either the process or an exploded diagram of the AXMX bolt assembly handy.

 

[Supersubes]

The extractor needs to be pushed radially outward. Then it slides out of its groove easily. I do this with a flat blade screwdriver

 

[Scott Seigmund]

Sir,

You don't need to dissemble the bolt to change the extractor. The extractor should be out until the retention lug clears the detent and then pull it forward. A small straight blade screw driver works best for this.

If you are uncomfortable doing this please contact AINA @ 540-368-3108 and we will do it for you.

-Scott

 

[BLKWLFK9]

Sir,

You don't need to dissemble the bolt to change the extractor. The extractor should be out until the retention lug clears the detent and then pull it forward. A small straight blade screw driver works best for this.

If you are uncomfortable doing this please contact AINA @ 540-368-3108 and we will do it for you.

-Scott

The man himself, answers your question.

 

[Dredd_RSA]

The extractor needs to be pushed radially outward. Then it slides out of its groove easily. I do this with a flat blade screwdriver

Thank you sir sometimes we miss the simple answers ;-)

 

[Dredd_RSA]

Sir,

You don't need to dissemble the bolt to change the extractor. The extractor should be out until the retention lug clears the detent and then pull it forward. A small straight blade screw driver works best for this.

If you are uncomfortable doing this please contact AINA @ 540-368-3108 and we will do it for you.

-Scott

Thank you for the feedback and support Scott appreciate it.

 

[ShtrRdy]

I thought AI extractors would be bullet proof. I'm disappointed to hear about one breaking.

 

[Dredd_RSA]

I thought AI extractors would be bullet proof. I'm disappointed to hear about one breaking.

Me too and on the first box of ammo. I must say that the replacement one sent from AI seems to have more material than the one that broke has.

My AI AX308 has been rock solid bullet proof. Still love these Rifles

 

[6brshooter]

I thought AI extractors would be bullet proof. I'm disappointed to hear about one breaking.

Omg! 1 broke, lol. Wake me up when there's more break. Ive had numerous rem700 extractors shit the bed, as have others. 1 ai extractor that broke is a fluke and probably just a heat treat or individual piece of metal that was flawed.