i am about to acquire an m1a set up to nm specs and was trying to get info on known performance loads and also see if varget and 175smk would work well in an m1a
m1a loads
- Thread starter turtlesniper
- Start date
Re: m1a loads
There are specific loads for the M-1 usually using a bullet of 150-172 gr and 4895 or 4064. The wrong load can damage the rifle (even including some factory ammo!)
This is an excellent resource for you:
http://www.alabamaservicerifleteam.com/id17.html
There are specific loads for the M-1 usually using a bullet of 150-172 gr and 4895 or 4064. The wrong load can damage the rifle (even including some factory ammo!)
This is an excellent resource for you:
http://www.alabamaservicerifleteam.com/id17.html
Re: m1a loads
Turtle
check out this site, it has helped me a great deal.
http://www.njhighpower.com/
Go to the bottom of the reloading stuph, there are reccommended loads for the M1 and M1A.
pdog2225
Turtle
check out this site, it has helped me a great deal.
http://www.njhighpower.com/
Go to the bottom of the reloading stuph, there are reccommended loads for the M1 and M1A.
pdog2225
Re: m1a loads
175SMK at 2.810" OAL, 42.2gr IMR4064, Fed 210M FGMM Primer, Rem Brass. Load is good all the way out to 1Kyd.
175SMK at 2.810" OAL, 42.2gr IMR4064, Fed 210M FGMM Primer, Rem Brass. Load is good all the way out to 1Kyd.
