MOLLE stock pack for gasser

[SIERRAWHISKEY]

Well here's the frist test try at the stock pack making and with MOLLE,I really just built it to fit the A2 type stock but I'm sure it will work on most all stocks.

Also built a removeable butt pad to take up some of the recoil.

Along with a ammo pouch that will mount to the MOLLE.

Used black buck suede and a piece of padding for a smooth cheek weld.

The charging handle just misses the edge .

Still got along ways to go and more T&E before it will be right and something that I would want to sell,you can mount almost any type pouches you like or leave it naked is the best option that I can see.

 

[308zone]

Re: MOLLE stock pack for gasser

SW, you never cease to amaze me.......nice work as always!!

 

[AlabamaShooter]

Re: MOLLE stock pack for gasser

Looking good buddy! You fiddle with that trigger yet?

 

[lexluther]

Re: MOLLE stock pack for gasser

Nice work, what do you guestimate the asking price will be?

 

[96C]

Re: MOLLE stock pack for gasser

Can you salvage the bottom row of molle from the seam tape? it's been closed off obviously... If you bind the outside first you'll be able to use that one

Good luck

 

[Sumpter Steve]

Re: MOLLE stock pack for gasser

Looks great buddy. Now see if ya can make one for the PRS stocks and I'm all in. Take care bro.

 

[Triad]

Re: MOLLE stock pack for gasser

Nice, you will sell a bunch if you can keep up.

 

[LoneWolfUSMC]

Re: MOLLE stock pack for gasser

That looks like a BUNCH of work.

GREAT JOB!

I don't envy the time you will spend on the machine if you are going into production with these.

 

[Hasgun Willtravel]

Re: MOLLE stock pack for gasser

Nice Scott, if you leave that bottom row or MOLLE unsewn until you bind the bottome, the stitch it down, and then bind the sides would fix the last row on MOLLE, Im sure you see it after your done.

 

[SIERRAWHISKEY]

Re: MOLLE stock pack for gasser

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 96C</div><div class="ubbcode-body">Can you salvage the bottom row of molle from the seam tape? it's been closed off obviously... If you bind the outside first you'll be able to use that one

Good luck </div></div>

Thats one of the things I need to work on is to sew the MOLLE on the outside of the tape or under it,I would really like to not use any tape if possible.IMO the tape is a pain in the ass to work with and if you sew insideout and then come back with a seam around the edge looks alot cleaner.

LW I made templats so I can zoom through them...

 

[tmpohuski7]

Re: MOLLE stock pack for gasser

Do you have aprice yet and will they fit the PRS with the cheek riser a couple of clicks up?