Gunsmithing Muzzle brake test

J E CUSTOM

Private
Full Member
Minuteman
Jun 27, 2013
72
0
Texas Gulf coast
A while back I built a muzzle brake for the 50 BMG because the brakes available were not pleasant to shoot. This test show some of that first test and the follow up test on the same design but in smaller calibers.

This brake has progressive ports and turning vanes to re-direct the shock-wave away from the shooter and hide the signature as much as possible.

Muzzle brake testing video
https://www.youtube.com/watch?v=yBfPrlE5SX0

Original 50 BMG video
https://www.youtube.com/watch?v=2Q_gG5euY3s


Enjoy

J E CUSTOM
 
The time was 7;30 or later CST some test were at the limit of the camera equiptment. Down hear it is to hot to shoot before about 6;00
and we held off on the flash test until later.

I will look to see where that time showed up and correct it. The first Test on the 50 BMG were earlier in the evening and we did not get the results we wanted so we made sure we did the flash test as late as we could.

Thanks

J E CUSTOM