• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

  • The site has been updated!

    If you notice any issues, please let us know below!

    VIEW THREAD

Rifle Scopes Please help me with IOR

Spuhr

Gunny Sergeant
Full Member
Minuteman
Sep 25, 2009
1,136
78
53
Sweden
www.spuhr.com
Hi

I intend to make a run of 35mm mounts.
In order to do so I need some measurements on 35mm scopes, espesially IOR as the communication with the company is poor.
I have asked to get spec or drawings and got as a reply that they have same measurements as Hensodlt and Schmidt & Bender.....:(

421316_10150817024874408_680984407_12688364_349680823_n.jpg

Most of all I need to know what model of scopes you have.
The meausurements A, D,F and J.
just apprximate measurements are better than nothing at all.....
Please help me?

Best Regards Håkan

Ps. Vortex and US optics have promptly answered my questions.....
 
Re: Please help me with IOR

6-24X56 FFP MOA

A- .060"
D- 2.20"
F- 2.80"
J- 7.30"

3.5-18x50 SFP MOA

A- .110"
D- 1.59"
F- 1.50"
J- 5.45"

These are not exact, they are within .010" or so.
 
Re: Please help me with IOR

3-18x42 I had from memory

D= 1 1/16"
A= <1/8"
Turret box was 1 1/2"
J=6"
F=3"

New scopes have a slightly longer "D" measurement and a shorter "F".

The ADM 35MM mount I had fit it without a problem although the rear ring was very tight (ADM rings = .98").
 
Re: Please help me with IOR

3.5-18x50 35mm FFP SF MIL/MIL Tactical DIGITALLY Illuminated MP-8 Dot Mod

A = 0.118"
D = 1.55"
F = 1.50"
J = 5.475"

I enquired earlier on a 35mm mount that had a height of 1.18 with 20 moa, and this is the scope i am intending to mount with it. Thanks Håkan

Wortman