• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

precision rifles... show em

[MENTION=98076]Knawx[/MENTION] those are Burris Zee rings, they're not the cause of any accuracy issues unless they're just not torqued properly. If you decide to change them out anyway PM me with tube diameter and ring height, I might take them off your hands ;-)
Not sure I said it before but NICE LOOKING RIFLE!
 
[MENTION=98076]Knawx[/MENTION] those are Burris Zee rings, they're not the cause of any accuracy issues unless they're just not torqued properly. If you decide to change them out anyway PM me with tube diameter and ring height, I might take them off your hands ;-)
Not sure I said it before but NICE LOOKING RIFLE!

Thank you for the reply! So far I haven't had enough time behind the rifle to get a sense of the accuracy. I'm doing load development so I've had some tight groups and some not so tight groups. haha - It's good to know what the rings are. I should have asked when they put them on, but at the time I wasn't too concerned. It was only later when reading over and over that rings and scope base are super important. Needless to say I got a little paranoid!

I like the way my rifle is looking so far as well! I just need to get a magazine for it ;)
 
sVcKhVz.jpg


Just got this beauty in a few days ago. Owner claims .25MOA with handloads, he's sending me some of his loaded ammo for me to verify.

Remington 700 5R in .223.

B&C Medalist Tactical

NF F1
 
sVcKhVz.jpg


Just got this beauty in a few days ago. Owner claims .25MOA with handloads, he's sending me some of his loaded ammo for me to verify.

Remington 700 5R in .223.

B&C Medalist Tactical

NF F1

Congrats on the new offspring! - Is that a suppressor on there? I keep seeing similar things on the end of barrels. Is it a suppressor with some sort of cover over it?
 
That's a huntertown arms Kestrel 5.56 direct mount suppressor. It has a mirage cover on it, yes.
I have no clue how it will fair accuracy wise yet but I have no doubt it will be sub MOA.
 
That's a heat shield. Silencers get seriously hot from the gasses and start to distort your vision through the scope (mirage). The cover keeps the heat away for a while so you can keep shooting. If you've ever shot with a supressor then you know not to touch the can after several rounds, or it will stick :)
 
That's a heat shield. Silencers get seriously hot from the gasses and start to distort your vision through the scope (mirage). The cover keeps the heat away for a while so you can keep shooting. If you've ever shot with a supressor then you know not to touch the can after several rounds, or it will stick :)

And you will cuss, a whole lot! :)

Sent from my SM-N900V using Tapatalk
 
I'm jealous. She's beautifull...

ax308a.jpg


Surgeon 591
AX 2.0 stock
Jewell trigger
Lilja .308Win 1:13 17"
EBI Arms brake
Harris BRM-S
Spuhr 34mm 20moa mount
Premier 5-25x56 MOA CCW MTC MOA-ER

Lapua 308 Palma brass
Lapua .30 155gr Scenar
CCI 450
36.5gr Vihta N130

gunsmith: Dolphin Gun Co. in UK (Mik's great!)
 
Another Remington 700

My Remington:
-7.62 Winchester... (Remington 700) w/ Nightforce 3.5-15x50 and NF rings and NF 20 moa rail, illuminated reticle (ARMY F1 over-run, first time mounted)
-McMillian A5 stock, optioned out. Aluminum and epoxy bedded action
-Stock Remmy 5r twist 24" long, Cerekoted, (I'm not good enough yet to waste money on a better barrel), of course, it's free floated
-Jewell Trigger hand fit, (was not drop in, b/c of safety)
-Badger Ordnance magazine conversion with both 10 or 5 round magazines.
-The list goes on, and more will be added but you get the point. Started out as a 29663... One of a million out there. Shoots 3/4 moa @ 100 yard after breaking in barrel w/ PMC Bronze. I think she'll be a shooter as she shoots more and I learn EVEN MORE FROM EVERYONE. Just wanted to be a contributing member as I lurk for years at a time.
-Comments welcome
 

Attachments

  • Remmy700(1).jpg
    Remmy700(1).jpg
    881.6 KB · Views: 23
My Remington:
-7.62 Winchester... (Remington 700) w/ Nightforce 3.5-15x50 and NF rings and NF 20 moa rail, illuminated reticle (ARMY F1 over-run, first time mounted)
-McMillian A5 stock, optioned out. Aluminum and epoxy bedded action
-Stock Remmy 5r twist 24" long, Cerekoted, (I'm not good enough yet to waste money on a better barrel), of course, it's free floated
-Jewell Trigger hand fit, (was not drop in, b/c of safety)
-Badger Ordnance magazine conversion with both 10 or 5 round magazines.
-The list goes on, and more will be added but you get the point. Started out as a 29663... One of a million out there. Shoots 3/4 moa @ 100 yard after breaking in barrel w/ PMC Bronze. I think she'll be a shooter as she shoots more and I learn EVEN MORE FROM EVERYONE. Just wanted to be a contributing member as I lurk for years at a time.
-Comments welcome

That's a nice looking rifle.

Sent from my GT-S6810P using Tapatalk
 
My remington 700 sps tactical .308 in an AICS Stock with vortex 6.5-20x glass
ImageUploadedByTapatalk1404045116.506517.jpg


Sent from my iPhone using Tapatalk
 
Just finished Remington 700 .308 with Choate stock, Shilen 1:10 twist, and Lucid 6-24x50mm scope and more.



 
Remington 700 SPS Varmint .308
McRee G7 M-Lev Chassis with the folder unit.
SWFA 5-20 HD
Muscle Brake
BO Bolt Knob
BO 30mm rings
TPS Steel 20moa Base
Harris B-R swivel








 
Stainless Remington Action
Trued by LRI
Krieger 5R 1:8.5 Sendero Contour threaded 5/8x24
PTG .250" parallel lug
6.5 SAUM
PTG One Piece fluted bolt
Nightforce 20MOA base 8-40 screws
Badger Rings
Manners T4 BDL Mini Chassis
Badger EFR
PTG Oberndorf Canoe Style Bottom Metal, Wyatt extended box
Nightforce ATACR MOAR
AADMount scope caps
Atlas bipod with quick detach
TAB Elite sling








 
My Rig:
Savage 110 LA 300 Win mag/ Cadex Field Core Chassis w/ XLR Tac Lite butt
Ergo Deluxe grip
22" McGowen 1-10 with S&J Hardware Linear Brake
Timney Trigger
Harris bipod
Vortex high 34mm rings
Bushnell ERS G2
Custom Bolt handle






 
Last edited:
20" Rem 700 AAC-SD .308
Optics: Burris MTAC 4.5-14x-42mm w/ 30mm WARNE Maxima Fixed Rings

A little bit of shaving off the front of the junk hogue stock allowed it to be truly free-floated. Added a bit of McNett Camo Form Multicam to my scope.

20140707_134043.jpg20140707_134232.jpg20140707_134241.jpg
 
My beautiful new rig thanks to Chad and the folks at LRI's group buy. Photos don't do it justice, it's just stunning work. Now to make it a bit less pretty, knock it around a bit, use it, camo it up. In other words, go from pretty to SEXY. :D LOL
photo 1.JPGphoto 2.JPG
 
A few pics of my toy.

Tikka T3 varmint stainless 6.5 x 55 swede
Robertson tactical stock
Atlasworxs t3 long action bottom metal
Atlasworxs bolt handle and shroud
AI .300WM 5rnd mag
recknagel 20 moa base
third eye tactical long saddle unimount
Vortex Viper PST 6 - 24 x 50
Harris clone bipod




 



Some will have seen this already but it is not finished with a couple of amendments. I really like the tikka actions. They are smooth as butter and plain shoot.

Tikka T3 Varmint .308 factory barreled action
Sako TRG trigger and stock
Kinetic Research Group chassis and mag release
Atlas spigot and bi-pod
 
ocRu69S.jpg


this is my current hunting rig until i get my custom r700 in a AICS AX with a nice 20" krieger.
this is a standard 700 sps .300 winmag, with a bedded boyds , and a Burris black diamond, with a wildcat predator 8 i use for deer.
 
Mine:

Remington 700 ADL with AAC-SD barrel
SWR Specwar 762 suppressor
SWR Trifecta Brake
Mcree's Precision Chassis
Vortex Viper PST FFP 6-24x50
Warne Mounts
Warne Rings

10446351_10102572404328134_6426115462185314097_n.jpg


10500464_10102572404383024_1389828301843151593_n.jpg


10492255_10102572404442904_7383686935432201480_n.jpg
 
Last edited:
Last edited:
Here is My custom 700 Built by Tim "Moon" Roberts at crescent customs
22" Bartlein M24 profile barrel 1:11.25 twist 5r rifling
AICS 1.5 chassis
Badger Ordnance Rings, bolt knob, recoil lug and brake
Leupold Mark 4 4.5-14x40
blueprinted and trued

<a href="http://s1290.photobucket.com/user/usnavy06/media/Rifles/CustomRem700308_zps0f730ce3.jpg.html" target="_blank"><img src="http://i1290.photobucket.com/albums/b537/usnavy06/Rifles/CustomRem700308_zps0f730ce3.jpg" border="0" alt="Custom Rem 700 308 photo CustomRem700308_zps0f730ce3.jpg"/></a>
 
Another 6mm Creedmoor in the stable for me. This one in a semi though...

Gap10, 6mm Creedmoor
23" bartline
Geiselle dmr two stage trigger
As of now a loaner hensoldt ssg-p which is growing on me very quickly :)

I have an adjustable gas block, jp low mass bcg, captured buffer setup, and brake on the way to take some recoil out and smooth things out a little. Gun shots phenomenonal as it is now and is very forgiving with every load I've put in it. Very happy with it overall!

2asyny6u.jpg


7evybuza.jpg


Sent from my SM-N900V using Tapatalk
 
Another 6mm Creedmoor in the stable for me. This one in a semi though...

Gap10, 6mm Creedmoor
23" bartline
Geiselle dmr two stage trigger
As of now a loaner hensoldt ssg-p which is growing on me very quickly :)

Nice clean machine. I have been contemplating this exact setup, other than the scope.
 
Here's my new baby... .300 WinMag, Remington 700 action (bolt fluted and action trued by LRI), Kahles K624i, AICS 2.0, fluted Krieger barrel, threaded LRI muzzle brake, LRI tactical knob, Nightforce 20MOA base, Atlas bipod.
 
Another 6mm Creedmoor in the stable for me. This one in a semi though...

Gap10, 6mm Creedmoor
23" bartline
Geiselle dmr two stage trigger
As of now a loaner hensoldt ssg-p which is growing on me very quickly :)

I have an adjustable gas block, jp low mass bcg, captured buffer setup, and brake on the way to take some recoil out and smooth things out a little. Gun shots phenomenonal as it is now and is very forgiving with every load I've put in it. Very happy with it overall!

2asyny6u.jpg


7evybuza.jpg


Sent from my SM-N900V using Tapatalk

That's actually pretty close to a build I'd want too. Though I'd build mine on MATEN upper and lower, and probably in 6XC instead. I really like the low recoil, high rate of fire idea, not sure why, it's not very practical for anything I'd do with it.

Sent from my GT-S6810P using Tapatalk
 
ImageUploadedByTapatalk1405288212.624941.jpg
ImageUploadedByTapatalk1405288544.007790.jpg

Remington 700
XLR Element
Atlas v8
Timney 517 @ 2#
Vortex PST 6-24x50
Seekins/Vortex 30mm low rings
Seekins 20 moa base
Bolt by Karl Kampfeld


Sent from my iPhone using Tapatalk