Any .223 barreled actions going out to anyone?
- Thread starter bohem
- Start date
- Status
Paid in full when I ordered it, #1843. Nothing yet
When I said nut I meant the flat oval nuts. It made no difference for me. I’m going to return the KRG ARCA rail for a refund and try the area 419. It’s twice as thick.
What options did you order? Do they have your FFL?
Short action,right hand, 6.5 barrel & a bolt face for a .223. They have my ffl info, it was sent in October (if I remember correctly) when they requested it.
The email was a general email,not specific to my order ,saying if you were waiting on a barreled action get your ffl info in.
"
We are working on the next batch of 22 receivers that we have here now. If you are waiting on the Nucleus Barreled action please send us an email with your FFL information included to the address below.
Subject Line: "FFL for Order #xxxx"
Address: [email protected]
Please do not respond to this email as it's highly likely to get misplaced. The FFL information is fundamental to getting the barreled actions shipped out, in order to best accomodate everyone please use the Subject Line approach listed above."
"
We are working on the next batch of 22 receivers that we have here now. If you are waiting on the Nucleus Barreled action please send us an email with your FFL information included to the address below.
Subject Line: "FFL for Order #xxxx"
Address: [email protected]
Please do not respond to this email as it's highly likely to get misplaced. The FFL information is fundamental to getting the barreled actions shipped out, in order to best accomodate everyone please use the Subject Line approach listed above."
Hmm, wish I’d found this thread prior to placing a deposit for the JHR last month. My order number 4000 something so I might get notification sometime in 2020. Not acceptable so will write off the $250 and invest in some minor upgrades to my Tikka TAC A1...
I wouldn’t write off the $250. These r nice rifles, your a month in on your Wait. I’ve waited over 2 years for rifles to be built and 1.5 year for scopes to be built. Just be patient. You won’t be disappointed.
I sure wouldn't write it off, you've already paid the deposit, just let it ride. You go on with your life and some day you get an email saying your rifle is ready, then you make the decision. So what if you go to sleep and wake up several thousand times
before you get the email, you're gonna do it anyway. Stay the course!
You need to wait at least 8 more months and a few ignored emails before contemplating writing off your deposit.
JHR order #1953 (1/29/18). As far as I know, I was next on the list. Received Paid in full email on the 14th. Nothing since. I am not sure if we will get an email or just see a change in the order status from "awaiting fullfillment" to something else.....
2331 here, so I'm probably a ways out, which is fine. I also preordered a Steiner M7X so if both are ready in March/April that'd be ok. hell, it's -31 (without windchill) out right now so shooting long distances isn't something I'm contemplating at the moment.
Order 2137 placed 2-26-18 for a RH JH 6.5cr.
No email at all so this batch may not finish out February 2018.
2076 seems to be the highest with a pay notification and some below that are still waiting..
I'm shooting a borrowed savage axis until the J.H. arrives.
No email at all so this batch may not finish out February 2018.
2076 seems to be the highest with a pay notification and some below that are still waiting..
I'm shooting a borrowed savage axis until the J.H. arrives.
Yep, It looks really nice so probably will just leave the order as is so if/when they contact me, I can make the decision. My Tikka is 6.5CM and dialed in pretty well so not really needing a new rifle. That said, was hoping to try out the JHR in 6CM this season. Oh well.
hopefully with the new production and expanded facilities they will be moving along with the JH rifles. At least that's my hope. Like you I ordered around Thanksgiving (38xx range I think for myself) and kind of assumed it would be a few months before I see the rifle. I had hoped that it might be april or may time frame so I could use it this summer/fall and maybe go to a match or two (I don't currently have anything to use for that type of shooting), but hoping (again) that it's not as bad as the two cans I put in jail around the same time.
Hopefully after SHOT show settles down and folks get back into their offices, they might be able to respond with some guidelines for when things might ship (JH orders #18xx thru #22xx will ship in February, #22xx thru #28xx in March, etc).
Order 2076 placed Feburary 13 RH JHR 6.5 CR - final payment made and waiting for shipment notification.
Order #2044 placed on 08 Feb 18 for JH 6.5 Cr. Got an email for final payment 14 Jan 19. Hope this helps someone.
This is a part of the email sent on 14 Jan 19:
"If you are receiving this email that means we will be building and finalizing everything on your JHR rifle shortly. Actions are in hand.
What this means is at this time we would like you to go online and complete payment for the remainder of your rifle. This email has only been sent out to the customers in this batch. Please don't reply with questions unless it is important as we are EXTREMELY busy at the moment."
This is a part of the email sent on 14 Jan 19:
"If you are receiving this email that means we will be building and finalizing everything on your JHR rifle shortly. Actions are in hand.
What this means is at this time we would like you to go online and complete payment for the remainder of your rifle. This email has only been sent out to the customers in this batch. Please don't reply with questions unless it is important as we are EXTREMELY busy at the moment."
Yes. 55 in-lbs (rings and cross bolt)
Also, just for info, I asked ARC and the nucleus rail should be 40in-lbs dry (no locktite)
Nucleus rail? You mean the rail to receiver mounting screws?
Load development day. Decided to put about 28 rounds through her just to break her in (cleaned after the first 10rds then called it good) before shooting a chrono ladder and even my break in/fireforming load is shooting single digit SD! Very impressed so far. Loving this rifle and ADG 6.5SAUM brass!!!
140ELD @ .020” jump
ADG 6.5SAUM virgin brass
58gr H1000
140ELD @ .020” jump
ADG 6.5SAUM virgin brass
58gr H1000
Attachments
Yes, Nucleus scope rail to receiver mounting screws are 40 in-lbs.
Anybody receive a JHR after shot show?
Not yet, I click my order status hourly, it still says "Awaiting Fullfillment". I am order #1953.
Just received Tracking number for JHR! (JHR order#1953, RH, 6.5CM)
So be checking your email.........
So be checking your email.........
Nice!
What!! They're going backwards, 2096 came through weeks ago...Lol
Just make sure you shave before use. That could hurt.You obviously don't mean 'double-sided' do you??? I know it is important to obtain a solid 'cheek weld' but...
Double sided???You obviously don't mean 'double-sided' do you??? I know it is important to obtain a solid 'cheek weld' but...
JH or a barreled action?
Order #2044 shippped. RH JH rifle.
Congrats to everyone with a shipping notice. To everyone else, trust me when I say the wait will be worth it. Love mine!!!!
Dang, thought for sure I'd be in the group that shipped today.
The link you posted is for 'double-sided' foam...But, also pictured (and linked to) is single-sided (one side sticky) foam...I assume the double-sided would be sticky on both sides...
- Status
