Suppressors Suppressed 510 Whisper with 975 grain lead cast

[762frmafr]

Here I am shooting my 510 whisper with an AWC suppressor and 975 grain lead cast bullets. Hope you enjoy.

<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/jxFpah2X678"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/jxFpah2X678" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>

 

[AXEMAN]

Re: Suppressed 510 Whisper with 975 grain lead cast

nifty. lotta lead splatter around the target

 

[SingleShot85]

Re: Suppressed 510 Whisper with 975 grain lead cast

Nice, looked like a lot more recoil than I expected for a subsonic load, but then again its 975grs.

time to kill some chit'

 

[Ranb]

Re: Suppressed 510 Whisper with 975 grain lead cast

Looks nice. I shoot an Encore in 510 whisper using 950 cast bullets from a mold made by Cast Bullet Enginering in Australia, a 800 grain NEI bullet as well as lighter surplus AP, ball, API and tracer.

http://www.youtube.com/watch?v=cEQoXmoYVfo

Where did you get the 975 grain bullets? From the sounds of things, that target was about 50 yards away. How is the accuracy at long range?

Ranb

 

[762frmafr]

Re: Suppressed 510 Whisper with 975 grain lead cast

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ranb</div><div class="ubbcode-body">
Where did you get the 975 grain bullets? From the sounds of things, that target was about 50 yards away. How is the accuracy at long range?

Ranb </div></div>
I got the projectiles from Ranger Rick. The target is 100 yards away. At that range I am getting a 3-4" group. I have just started shooting these projectiles so I cannot comment about longer ranges yet.

 

[Short-bus]

Re: Suppressed 510 Whisper with 975 grain lead cast

Get a video of you shooting a deer with it. I'll bet it hits like Thor's hammer. That's a lot of bullet!

Shortbus

 

[Gavin S.]

Re: Suppressed 510 Whisper with 975 grain lead cast

Well, that's just cool. I want one.

 

[762frmafr]

Re: Suppressed 510 Whisper with 975 grain lead cast

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Short-bus</div><div class="ubbcode-body">Get a video of you shooting a deer with it. I'll bet it hits like Thor's hammer. That's a lot of bullet!

Shortbus </div></div>
it's in the plans....worry not my friend.

 

[DustyJacket]

Re: Suppressed 510 Whisper with 975 grain lead cast

Are you using gas checks or something to keep the lead out og the suppressor?

 

[762frmafr]

Re: Suppressed 510 Whisper with 975 grain lead cast

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DustyJacket</div><div class="ubbcode-body">Are you using gas checks or something to keep the lead out og the suppressor?
</div></div>
I am using gas checks but they are not required. Do you use gas checks in a suppressed 22 LR?

 

[Ranb]

Re: Suppressed 510 Whisper with 975 grain lead cast

Based on my experience, gas checks do NOTHING to keep the lead out of a silencer. My 510 whisper can is a friggin mess after using cast loads in it, just like my 22lr can. I always use gas checks for accuracy reasons on the 44, 458 and 510 caliber bullets I shoot.

Ranb

 

[DustyJacket]

Re: Suppressed 510 Whisper with 975 grain lead cast

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 762frmafr</div><div class="ubbcode-body">I am using gas checks but they are not required. Do you use gas checks in a suppressed 22 LR? </div></div>
No, but a .22 can usually is a take-apart so you can clean the lead out. Is your can a take-apart, too?

 

[762frmafr]

Re: Suppressed 510 Whisper with 975 grain lead cast

No... But it can be dipped...

 

[rpk762]

Re: Suppressed 510 Whisper with 975 grain lead cast

That is too cool. It would be a good place to get rid of some of my lead. Looks pretty hard on the grass. The grass probably had it coming.

 

[KYS]

Re: Suppressed 510 Whisper with 975 grain lead cast

Are you going to go lathe turned solids at some point? would be cleaner on your rifle and can....

 

[762frmafr]

Re: Suppressed 510 Whisper with 975 grain lead cast

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYS338</div><div class="ubbcode-body">Are you going to go lathe turned solids at some point? would be cleaner on your rifle and can.... </div></div>
Nope....im not worried about it...they both can be cleaned...

 

[Am180man]

Re: Suppressed 510 Whisper with 975 grain lead cast

Very cool! Waiting on my suppressor to clear to me. 2" x 16" with stepped baffles. Very quiet. Have it in a McRee Precision chassis system. Still deciding on glass for it. Can't wait to get it out to play!
Steve

 

[762frmafr]

Re: Suppressed 510 Whisper with 975 grain lead cast

bump for BMorgan...

 

[PGG]

Re: Suppressed 510 Whisper with 975 grain lead cast

I want to see video of you shooting a pig with that. Very nice. I have a AWC on order for mine but have a long wait still...