Got my CTR mag stock today. Now my bolt gun collection is complete.
“Complete”
L O L
So now you have the guns, focus on optics, get a nice S&B for all those rifles.I have a "1 safe" rule and it is full so something would have to go before being replaced.
It's the only way I can keep myself in check![]()
Oh dear God. Please don’t say that!So now you have the guns, focus on optics, get a nice S&B for all those rifles.
So now you have the guns, focus on optics, get a nice S&B for all those rifles.
Wait. Gen II razors aren’t expensive? Is your company hiring?I've thought about it but I have kind of outgrown the want for ultra expensive optics.
I'm perfectly happy with the Gen II Razor and DMR II's. My vision just isn't good enough to utilize anything more expensive.
What would be your dream Tikka build?
If there would be a Tikka custom shop, unlike that would never happen, but what if
I would love this kind of build.
Tikka action with KRG Midas trigger.
Steel picatinny rail 0 MOA.
Proof carbonfiber bull barrer 22-24".
Never even hold my hands one, but read a lot and they look very good, and it would keep the weight down, since the barrel is the most heavy part on rifle.
Caliber could be 6mm creedmoor or 6mm XC, never had 6mm.
KRG Whiskey gen 3 chassis with folding stock.
Full titanium suppressor, light and quiet.
Final drop would be cerakoted with multicamo, kind of love that pattern.
A Tikka noob question. I'm thinking about starting a 6.5 PRC project and want to use a T3x action.
As long as I buy one of the variants with the magnum bolt face, can I simply buy a prefit barrel (looking at the Proofs right now), an action wrench and put it together myself?
I went cheep and ordered a yodave trigger spring.
Hey guys,
Don't have access to a chrono at the moment. But, i am just curious as to what what type of speeds guys are getting from factory 140/147 ELDM's out of a 24" CTR with factory barrel.
Just picked one up and topped it with an Ares ETR 4.5-30X and am excited to stretch it's legs and start working up data. Think realistically it'll get something like 2650 with the 140's. Planning on sticking with factory till my shooting improves enough to warrant reloading.
Can anyone recommend a good die set for 6.5 cm?
From what I have read, removing the old barrel might require a gunsmith.A Tikka noob question. I'm thinking about starting a 6.5 PRC project and want to use a T3x action.
As long as I buy one of the variants with the magnum bolt face, can I simply buy a prefit barrel (looking at the Proofs right now), an action wrench and put it together myself?
I have had good luck with the Hornady match grade dies with the bushing and micrometer adjust seating stem for my 223 and 6.5 Creedmoor. Shot groups in the .1 and .2 with both rifles. Good deal for the $$ if you look around.Can anyone recommend a good die set for 6.5 cm?
Simple.
20moa base
Foundation stock
Sterk handle
Midas trigger
PVA carbon sendero barrel at 26"
6.5PRC
156gr bergers
Vortex AMG
TBAC ultra 5 can
This is actually, the next rifle I build.
Which bushing do you use? Thanks!I have had good luck with the Hornady match grade dies with the bushing and micrometer adjust seating stem for my 223 and 6.5 Creedmoor. Shot groups in the .1 and .2 with both rifles. Good deal for the $$ if you look around.
Which bushing do you use? Thanks!
I called and asked them, it will only be in the terrain model and some time in 2020.Has anyone heard any news lately about when Greyboe will be starting back up on Tikka inlets ?
I called and asked them, it will only be in the terrain model and some time in 2020.
Any side view pictures of this rifle? Just wondering how the MT bottom metal looks from the side on a real rifle.No more plastic
View attachment 7205012
Any side view pictures of this rifle? Just wondering how the MT bottom metal looks from the side on a real rifle.
Thanks. I didn't like the MT pictures of the square trigger guard but it looks pretty good on a rifle.View attachment 7205076
I should mention I’m happy with the product MT puts out. Have a bunch of thier stuff, no problem with any of it. They answer the phone when I call and are pretty receptive. Got to test function a little on the above setup today and it feeds like a dream, smoother than stock setup, I was surprised.
Has anyone heard any news lately about when Greyboe will be starting back up on Tikka inlets ?
Check out the PSE carbon fiber stocks. They offer a CTR inlet. @ejg is the guy to talk to here
View attachment 7205433
From what I have read, removing the old barrel might require a gunsmith.
No we wont, if EU can put it´s hand on the game.
EU is planning to bann ammo, that has lead on it.
So good buy 22LR, air rifles, sport shooting etc.
F..K EU![]()
Get a whole set if you don't have one yet.In order to make sure I have the correct metric allen wrench, what size screws hold the top scope rail onto a T3 Tac A1?
Looks pretty good in camo - and I have a soft spot for compact rifles.My 16” Tac a1
I have one in a 5 round and it has worked well. If you're running all Tikkas, without the binder plate is the way to go. If you also have a Remington, you might consider with the plate unless you want separate mags for each rifle.You mean those, right?
![]()
Accurate Mag AICS Style .308 Winchester/7.62x51mm DSSF Magazines
Accurate-Mag Products Precision center fire rifle cartridge magazines are based on current service configuration meeting all Mil-Spec and NATO Stanag requ...www.altusshooting.com
Do those without the binder plate have any disadvantages?
What brand is that cheek pad?
What brand is that cheek pad?