Building a 338 Norma Mag to shoot to 1 mile. What power scope do you recommend?
Range reports welcome.
I'm thinking Leupold Mark4 ERT 8.5-25 x 50mm.
Range reports welcome.
I'm thinking Leupold Mark4 ERT 8.5-25 x 50mm.
Travel is more important than zoom.
What's your price range?
Nightforce atacr, sent a pm on brass too
Gotta be FFP.
Consider the new Kahles 624i with the AMR (Advanced Milling Reticle):
? View topic - In the Building....
Consider the new Kahles 624i with the AMR (Advanced Milling Reticle):
? View topic - In the Building....
I have a Mark 4 ERT 6.5x20 with the H58 and love it.
+1. I love the ability to either dial a hold, use the grid, or a combination of the two.
You could do the dial/hold combo on any mil-based reticle. I personally think the Horus reticles excel at it thanks to their grid pattern.Come to think of it....on the Leup MK4, I would think you could dial the full extent of the internal adjustment AND then also use the TMR hashes to get more drop.... right?
Necroposting?What would be good scope for a ruger 300 PRC. For a MILE shot
I hope to use my newly acquired S&B PMII 3-27 out to a mile one day. Did I compromise?Necroposting?
ZCO 527 with MPCT3
anything else is compromising
#circlife
100 percent. Bender is brown glass and known for failures.I hope to use my newly acquired S&B PMII 3-27 out to a mile one day. Did I compromise?
That seems awfully flat for that combination even at my elevation.338LM using 300 grain Berger Hybrids at 2740 fps. 13.1 mils to a mile from a 100 yd zero at 950 ASL. Rifle has a 30 MOA rail and an ATACR scope.
You sure you didn’t mean to type 18.1 mils?338LM using 300 grain Berger Hybrids at 2740 fps. 13.1 mils to a mile from a 100 yd zero at 950 ASL. Rifle has a 30 MOA rail and an ATACR scope.
He is running a 30 MOA rail.You sure you didn’t mean to type 18.1 mils?
Have you confirmed this dope?
I’m getting 17.1 mils at 2850fps at 800 ASL.
That will have no affect on total elevation dialed. I have a 30 moa rail and I still need to dial 18.1 mils from 100 yard zero confirmed thru drop data.He is running a 30 MOA rail.
That's what happens when I don't get enough sleepThat will have no affect on total elevation dialed. I have a 30 moa rail and I still need to dial 18.1 mils from 100 yard zero confirmed thru drop data.
All good man!That's what happens when I don't get enough sleep
I run a 45 moa rail but as stated below that has no bearing on how much come up you will needHe is running a 30 MOA rail.
That will have no affect on total elevation dialed. I have a 30 moa rail and I still need to dial 18.1 mils from 100 yard zero confirmed thru drop data.
Yes, massive amount of magnification isn’t needing for ELRBack to the OP's question... I think 20x would get it done, probably 18x. I think a good general rule for steel targets (maybe it's only my rule?) is 1x per 100 yards as a minimum. Of course it depends on target size. I've shot 18" wide targets with 27x and had no issues. I prefer something in the high 20's. The benefit of the extra zoom is it will help you spot impacts better.