• What Optic Hill Would You Die On? - Only a Few Hours Left To Enter!

    We all have strong opinions about optics, now’s your chance to share yours. What’s the one thing you firmly believe? Winner gets new limited edition Hide merch. Remember, subscribers have a better chance of winning!

    Join contest Subscribe

Gunsmithing What to build with a 6mm barrel

shepherm

Private
Full Member
Minuteman
Jan 16, 2006
87
0
West Oklahoma
Ok I have extra broughton 6mm barrel that I need to build into something either on a remington 700 or ar15. It is a 1-14 twist, .908" at muzzle and is only 21.5" long and I would have to take off about an inch to rethread it for a Remington 700. I have a 6mm br already but was thinking about the 6mm/223 or the 6mm ppc. I was really looking at the 6mm/223 because I have lots of 223 brass and it might make a good ar15 barrel at about 21". So what do you think? Would it make something better than one of these?
 
Re: What to build with a 6mm barrel

the 6mmx223 is a great round for the AR , launches 55gr pills faster than the 223 can and will do it from a shorter barrel , its very effecient little round.
Necking up your brass is a simple 1 step deal with the right die.

If you have a good accurate 6mm bolt action then I'd realy look into the 6x223

otherwise the 6mm BR is a great round to
 
Re: What to build with a 6mm barrel

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JJones75</div><div class="ubbcode-body">the 6mmx223 is a great round for the AR , launches 55gr pills faster than the 223 can and will do it from a shorter barrel , its very effecient little round.
Necking up your brass is a simple 1 step deal with the right die.

If you have a good accurate 6mm bolt action then I'd realy look into the 6x223

otherwise the 6mm BR is a great round to </div></div>

Yes I have the 6mm BR in a remington 700 that is a tack driver so I really think I should build it for my AR. I have redding S die so I think i could just get the larger bushing and should work out great. I bought the die so I could use it for the 20 practical and this might work out good since I could use it for the 223, 20 practical, and the 6x223! So far I think this looks like a good choice anyone else have any input?
 
Re: What to build with a 6mm barrel

I have a 14.5" AR built around one (soldered brake makes 16") and Im love it , I think the military should look at this round rather than the 6.8SPC as the only mod to the current weapon is a new barrel.

I've used it to shoot coyotes out to 300yds with the 55gr Ballistic tips with awsome results
 
Re: What to build with a 6mm barrel

Maybe 6mm-250? Standard .473" boltface should be a plus. Tames the .22-250's case capacity to something less abusive of throats the either the .22-250 or the .243, and should still perform pretty neato. Neck up .22-250 by 1/2mm or so, should be a simpler wildcat wiith readily available multiple-source brass. Even with the slower twist, it should be dynamite for anything out to as much as 600yd. Might even be OK for deer.
 
Re: What to build with a 6mm barrel

6/204RR I am not very fimilar with this round, but have a buddy that built one on a Rem 700 and took it hunting rock chuck. I think he runs 70gr pills.
I could be wrong, but think there is some advantage over 6/223, but I have no clue what it is.