Not my deal but I thought @sirhrmechanic might enjoy a look.
Is this item for sale?

1. For Sale

Sale Price5600$Is this item for trade?

1. For Trade

Trade Value or Items Looking For$5600Location73507, Lawton, Oklahoma, United States
Just finished this matching pair of mountain howitzers. The wheels are 42”x2” wide. Overall length is 7’6” long x 48” wide, everything is made of oak. Barrel is 38” long and has a 2 1/4” bore made by Hern iron works Price is $5600 each. Located in Lawton Oklahoma. Delivery is available.

Photos are too large and wont load but if your interested pm me and I'll send you a link.

ARC 36mm rings - 150$

ARC Mbrace nv bridge - $125

Spuhr 5006 mount - $375

Hello Hide,

I think this is the 3rd time I've broached this subject within the past year but feel like I've somehow fucked up again.

My father recently celebrated a birthday (a celebration I wasn't invited to despite living "close enough") that entered him into a new decade. I completely blew it in that regard- I thought the milestone birthday was next year but... nope.

I'm the eldest of 3 siblings, everyone else lives across other states (and we couldn't have pulled off bringing everyone together at the point). That said- I feel somewhat obligated to direct these type of things and corral my brothers/sisters but frankly I don't know how old even I am at this point without asking my wife let alone how old my parents are. Not offering that as an excuse either- just an explanation of where I'm at.

As I mentioned, I can't help but feel like an unspoken expectation falls on me as the eldest child (far from the favorite child) to rally my siblings into having a later celebration for our father. But I'm not gaining much ground there (and before anyone asks he was as good a father as he could be-no issues there, if I would hazard a guess, it's just dang expensive to pull off a celebration is all and everyone is/has been struggling in their own ways.

So that all said (and yes I tend to be lengthy in my posts), one of the things that really bothers me is I don't recall this particular struggle ever being a 'thing' decades ago. Growing up- we always knew we'd go to my grandparents (about an hour or so away from my childhood house) for 'lesser' holidays like Father's Day/ Mother's Day/ Memorial Day/ Veterans Day/ etc and the more "important" holidays such as Easter & Christmas the grandparents would visit their children's houses (but you better believe everyone would visit their house around that time too).

I can't speak for anyone else- but I can't help but believe my own father has the same expectations but the "realities/differences" exist that their kids cast a much wider net than his own siblings did. A long trek home was a 2 hours drive but now it's a plane ticket for the children and their families (TL/DR: thousands of dollars to bring their own families back to "home base").

Anywho- I'm just venting and complaining that I feel that as the eldest child & closest living child I was supposed to make this particular birthday about 10 degrees better than it ended up being (and didn't) It just seemed a lot simpler even 30 years ago on what was expected and what was done but the rules seemed to change rather drastically and I'm still waiting on the updated playbook.

-LD

Looking to Re my FI Vanta 9 5” DLC
Has 50 Rounds down the tube
Comes as i received it from FI
Bag, lock, Vanta, Acro Plate, 1 mag

Extras:
Aimpoint Acro 3.5moa
Surefire x300U-b
TXC holster Poppies of war pattern OVRT/QLS-19 fork

Will sell slick with no accessories, or rigged out.

Save yourself the wait time i waited, and enjoy this beauty. I have other projects to fund so someone can get lucky.

SOLD

*Cross posted*

Ever dealt with frogs? Pepe doesn't fuck around!
Login to view embedded media

Only 18k from every Dane.
Login to view embedded media

I have a brand new in the box Aero Solus short action, .473 bolt face. I bought three of these, built two of them into rifles for my son, not going to end up using this one. $675 to your FFL. No trades

Brand new Auto Trickler V4 with FX120i scale
This is duplicate unit for me and plans have changed, so selling extras.

The trickler came direct from MacDonald Innovations

The FX120i came direct from CE products (AutoTrickler distributor)

The only powder run through this unit was during the set up and function testing which CE tech support did with me in real time which makes their customer service incredible. Not to mention we were setting up 4 units at once in real time (2x Autotrickler and 2x SuperTrickler)
SOLD shipped

*items in photos that are not AutoTrickler or FX parts are not included*

CRB barrels in stock at riflebarrelblanks.com!

Rifle Barrel Blanks

We have 6mm barrels in stock, 6.5mm barrels in stock, and 25 cal barrels in stock. Both in straight contour and the CRB comp contour.

Comment here and send a message for a Snipershide only discount code!

Thanks for looking

-Jake

Friends
You know I don't get on here much.
This won't change.
Just wanted you to see to our knowledge.
The first Printed action in the world.
Thanks
Preston Pritchett

It’ll come as little surprise to anyone here, but the recent “protests” by Illegal Alien Invaders (“IAI”) and what they REALLY want has been intentionally buried by the Fakestream Media.

Login to view embedded media
They don’t want to be or become Americans. They want to either retake or sieze as much of America for themselves as possible. They have no desire or intent to assimilate. They want to push their “La Raza” agenda (“The Race”). They are genuine racists who believe in the superiority of the Latino above all other races.

It is widespread. It is irrefutable. They are criminal invaders.

Anyone hear anything on this, someone just sent it to me. Is it legit?

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.
1. Onward Research Recce Rig With Tactical Tailor GP pouch, USGI SAW pouch and Roll 1 Trauma Pouch, FDE, Never take outside -SOLD


2. Spiritus Systems Micro Fight Chassis MkV with S&S Pull tabs, Spiritus Systems Thing 2, Spiritus Systems CCS Pouch Shoulder straps and Back Strap, Spiritus System TKO Pouch (Fits a Tourniquet or Kestrel)- Little to no use - This is like $350 New from Spiritus Systems - $OLD

I am looking to sell my Accuracy international covert. It is an Accuracy international AE MK III. It comes with everything pictured. 16 inch barrel from SAS with Covert supressor. The Covert barrel has an unknown round count. I will pay the first transfer fee (Note that I will transfer the can to your dealer but you are subject to ATF rules and guidelines) and transfers the suppressor to your dealer. The rifle comes with a S&B 5-25x56 optic that is mounted in a Spuhr 4001 mount. The reticle is P4F MOA reticle with MOA adjustments. Also included is a Barrel wrench from Bugholes and a 16 inch Proof research carbon fiber barrel. Round count on the Proof Barrel is 504. It is currently fit with a SAS muzzle break that will be REMOVED upon sale. The rifle has 3 5 round mags and 1 ten round magazine. Also included is the bipod and sling. I am asking $7500 for everything. I will not split items until the rifle sellls. Sorry no trades.

2009 join date.
229 posts
9 of those posts between 2009 and 2011
220+ posts between 2024 and now

How are these USAID / fedgov shills getting ahold
Of these old accounts ?

Whiskey 3 forend FDE $75 shipped
X-Ray rear stock FDE SOLD
Arca spigot SOLD
Arca rail SOLD
Krg Harris bipod direct mount $25.00 shipped

Will add pictures tomorrow of what I don’t have of yet and may add some stuff as I clean my safe out. All is used but in great shape.

I have a certificate for a Curtis Valor.
$1500 value.
$1250 OBO drop to $1000
Venmo, PayPal add 3.5%

385- Sierra 30 cal 175 GR HPBT
Different lots. $125


360- Hornady 30 Cal 168 BTHP Seconds $old

Prices to me shipped to you.

i have a BA 18” barrel that has a 158fps spread using a garmin xero. imi razor core from 2016 lot. i did 27 shots with:

2848fps high
2684fps low

can a shitty barrel do that? even his Douglas seems extreme and thats no shitty barrel.
garmin problem?
what other info do we need here?
i chrono’ed my buddys douglass barrel and his had a 95fps spread.
2837fps to 2742fps over only 5 shots.

Needing some advice. Story goes like this: I tore down a Remington 700 chambered in 243 with no more than five boxes put through it wanting to build a competition rifle chambered in 6mm creed. Teardown went great and assembly went equally as good. First ammo I put through it was some Hornady eld-m with no problems. I bought a couple cases of Norma Golden Target, shot a couple boxes with no problems and some pretty good groups. All was good until I had a “click” and no boom. Recocked the firing pin and another click. Pulled the round and saw a light primer strike. Didn’t think anything of it, chambered another round and another click but this time no strike at all. Looking into it I found several fired brass that had “inverted primer strikes” by that I mean they were not a crater but a dimple like they flowed into the firing pin hole. Also found one that had a perfect circle cut out of it which I found inside my bolt assembly along with a bent firing pin. I figured that my pin failed somehow and caused all this and went on a search for a new one. I decided to purchase an entire assembly from PTG instead. All was good except for the first half box and then the same problem came back along with the problem that when you run the bolt home with any haste the firing pin will fall with the bolt handle when closing unless the safety is on. Now, before I get hammered about Remington’s trigger problem this is not the factory trigger but rather a Triggertech although the same thing happens with the factory trigger and a jewel from another rifle. I called PTG and they said they “knew what the problem was” and would send another bolt. Got the second new bolt still acts the same but now it also drags on the sides of the slot in the receiver that the bottom of the cocking piece slides through. My factory trigger has a small window where you can see the sear engagement with another piece and when you run the bolt home too hard you can see that the sear slides past that piece and the pin will fall as the bolt closes. If when they disengage from one another you back the bolt up ever so slightly they reset and the group functions as normal. I’ll up load any pics needed and can measure anything to the best of my ability this one is Messi no with my head and needing a little directional input. Thank you all in advance!

Hey guys,

I've got some basic questions that my google fu is weak on. I'm just going to go ahead and list my questions in no particular order. Any help would be appreciated. These questions are only applicable to Thermal as that is what I am interested in.

1. Do you need an illuminated reticle to use with a clip on? I'm a little confused as to how visible the reticle will be without illumination overlaid on a digital screen.

2. Obviously this is clip on dependent and seemingly subjective but how much low end magnification can you get away with using a clip on? I was hoping to be able to use a Mk5 3.6-18. I'd rather not buy an LPVO if I can avoid it. By the same token, if say my optic is 3.6 on the low end, will this be similar to listed native magnifications on thermal scopes, ie "base mag of 2X". Would 3.6 effectively be my "base mag"?

3. To the best of my understanding, there are only a few commercial grade clip ons that supposedly don't require collimation. The Sig offering and I believe the new Armasight clip on. Am I missing any?

4. RE: Zeroing profiles and collimation. Lets say you have four guns and four zero profiles. Do you have to collimate the optic each time you place it onto a different platform and switch zero profiles or is that somehow saved within the zero profile?

I think that about covers my questions for now. If I think of anymore i'll add em!

Thanks guys!

Lightly used ridgeback for 700 SA. Grayboe bottom metal and sawtooth rifles arca rail.

I bedded the stock and used touch up paint to cover paint chip areas. The paint makes the bedding look like shit but it turned out decent for a rookie job and made the rifle that was in it shoot very well, but since it’s not factory new, I’ll take that into account with pricing.

Asking $375 shipped for all.

NOTE: ANOTHER PERSON IS ATTEMTPING TO SCAM PEOPLE AND SELL THIS ITEM!! IT IS SOLD!!!

BNIB: SAC Modular Action Wrench w/ Bumpers and #5 / #15 heads.

$145.00 shipped

PP FF or Zelle

<Picture Removed to protect folks.>

Up for sale is a leupold Mk5hd 5-25x56 FFP TMR reticle. Has been hunted with before so it has some slight marks but glass is flawless. Scope is sitting in ARC rings. Probably has some ring marks under them.

$1650 shipped
2/24 - price drop to $1575

Schmidt and Bender 3-20 Ultra Short with 1/2 cm-cw MT II MTC LT Turrets and MSR2 reticle. Scope with caps only - 3.1K shipped insured or 3K DFW area face to face. If you want the mount - NF ultralite 1.5" add 250.

Like new - love the scope, but going to an LVPO on this build as she's only 5.5lbs pre-optic.



Trades: March 4.5-28 or 5-42, Razor G3, Zeiss 6-36, K540i, ZCO 840, TT735, Theos, all in mils to upgrade a bolt gun - I already have the LVPO for this one - thanks.