34mm: 0-MOA; Low 1.27"

This is my absolute favorite mount, but I've recently sold a bunch of 34mm glass and have too many mounts.

Login to view embedded media

These firearms and parts were “destroyed “ 3 years ago - except obviously they were not .
The DEA claims the FBI handled the destruction of these frames and receivers - the FBI had an explanation

“We keep those in large bins in a cafeteria building , accessible to basically everyone “
Our bad we won’t that again . That’s the official narrative.


Stupidity and incompetence aside - it would be very helpful to have bins full of “destroyed “ firearms to arm- I don’t know - next school shooter - or whomever can aid in the narrative.

Hello Hide, I don’t post online much but I’m stumped. Been shooting and reloading for my 6.5 Grendel AR for about 6 years. Im a machinist and have been hobby gunsmithing for 30 years but far from an expert. Recently replaced the Alexander Arms 18” barrel with a Lilja 16”. Started out with some OK groups 1 to 1.5 MOA on average. Seemed to like the Hornady SST and Shooters World Match Rifle powder so bought a bunch and started to refine a load. Every time I went to the range, the performance got worse. Thought it might be the scope so changed from the Athlon Helos 2-12 I was using to an NF ATACR 4-16 in quality mounts. No dice. Stopped using a suppressor to remove variables but no help. Performance went from bad to worse. I clean regularly with boretech and nylon brush followed by patches. Baby the crown and always use rod guide. I’ve done what I know of to give it best chance for accuracy. Barrel is bedded in loctite 609, receiver is lapped, nut is torqued to 50 ft lbs. Gas tube is tweaked to not touch receiver, AGB tuned to just lock open on last round. Everything to do with optics is torqued to spec and loctited. Everything on the gun is premium but 300 rounds in an it’s shooting 4MOA with the same loads the were 1 MOA at first. Nearly all groups have a mostly vertical dispersion with an angle high left and low right. Pretty sure it’s not me, I can shoot great groups with my other guns. Just bought a bore scope and it looks pretty good to me with the exception of the gas port which clearly has some buildup on it. Don’t know what normal looks like so hope someone can say if that looks problematic. Also, when I received the barrel the extension looked like it was produced in 1980’s china. I polished it up as best I could. I’ll add a pic.

What am I missing? Appreciate any suggestions. I’m loathe to ditch a new $450 barrel but the gun is worthless as is.

Seems his account has been hacked or something wild. I rather enjoyed his postings of some things you never knew existed?

500 rounds

$650 shipped

NO TRADES

This scope is like new, zero issues. I got it in June, mounted and sighted it in. It’s sat in the safe since. The price includes shipping and the ARC rings and BC caps.

$1800

OR

$1700 without the rings

PP +3.5%
PPFF
ZELLE
MO
CHECK

Zero Compromise Optic
Model: ZC527 5-27x56 MIL WR
Reticle: MPCT 2
Serial #DA246
Item# 6000003

Zero Compromise Optic
Slimline mount 6 mil
#400-0387

This scope is in great condition and has sat in the safe more then it’s ever been used. No damage, glass is perfect with no marks or scratches. $3200 shipped to you door.

PayPal Friends and Family
Ships with tracking number

Has anyone had any time behind these new heavy profile Geissele barrel??

I just picked one up from Primary Arms with thier Halloween sale. They look to be the same profile as the barrels I custom order. Only thing I would have done differently is 5/8x24 threads and a intermediate gas length.

Arizona > Your State

Login to view embedded media
Login to view embedded media
Login to view embedded media

Like new vortex razor 4.5x27x56 ebr-7c mrad
Never shot in a match.
Only mounted on one rifle that went to the range twice.
Comes with vortex xhigh rings
$1450 shipped

I was wondering if getting a muzzle threaded in reverse and getting some TBAC NT and CB brakes made with reverse threading would be possible. Seems like a better idea than reverse threaded cans if it was easy to do, seeing as I spin my cans on and off repeatedly but hardly ever remove the brakes. Any thoughts on this?

is hitting iran

My proof research SS 6.5 creedmoor zermatt origin action prefit barrel gave me a headspace/datum line measurement of 1.534" on fireformed brass yet my brand new alpha brass had a measurement of 1.5345" and im not sure if this is usual? this is my first bolt gun and new brass typically has a much shorter headspace measurement than once fired. After installing the barrel i checked the go which it closed on and no go which is failed to close on so the barrel passed them but it just seems a little strange that my once fired has the same datum line measurement as brand new brass thats usually on the shorter side of datum line measuremens. Can anyone explain if this is normal. If not is it bad? I contacted proof and they basically said it's fine but idk it feels strange to me. What is usually what ppl experience in fireformed brass datum line headspacing growth from new brass?
(Picture is of my rifle)

I started to shoot groups for accuracy, using a 223 Zermatt TL3 action with a Shilen 26" barrel and MDT ACC Premier chassis. After the initial adjustments for the bullet seating depth, I got .75" outside to outside groups, that are now opening up to one inch. Everything is the same. Before I make any changes to the rifle and/or loads, I would like to make sure that I am not the problem. Can a lead sled provide a reliable answer? I would want to just pull the trigger and don't touch anything in order to take me out of the equation.
Is this a good idea or the wrong approach? Please let me know what your experiences with this method have been.

Hey all,

I know, weird car. But there's one for sale in my AO and just because it's weird and odd I decided to take a look. It's super clean and well kept. It has sub 34,000 miles and clean title. They want $5000 for it. I'm thinking it might be worth it for re-sale.

Check engine light is on and we took it for a diagnosis and cylinder is the issue. Supposedly it might be spark plug, wire, or coil.

Any thoughts?

It appears the retaliation has started, personally surprised they would be doing “limited “ strikes

Login to view embedded media

Login to view embedded media
19:00 Miss ID. SSN that don't match, Signatures written the same... etc.

I purchased this sniper package that was used in Afghanistan. The sniper was offered the chance to buy it but declined. It was returned to Knights Armament for overhaul. When it became available I decided to purchase it.
Login to view embedded media

You must really suck!!!!

Oh wait... we are talking about Cackle Snatch here.

She DOES suck!

And apparently has the IQ of a fencepost! According to Mel Gibson ;-)

It's not a 'great' October surprise. I'm still hoping for a better one. Like Tim Walz being discovered at the Budweiser Breweries blowing Clydesdales. With Paul Pelosi.

But the sheep stupid enough to have their Harris/Walz signs in their yard because they were told and have TDS... well, they'll still vote for them. Numerous times. Along with their illegal maids and gardners.

Sirhr

I've got 5 friends and family 40% off codes for sitka if anyone wants one.
It looks like code hunt50 will take $50 off an order >$250 as well.

Codes will go by order of comments within this thread until they're all spoken for

JUST 1 LEFT

Complete V2 Autotrickler System unused. Asking $150.00 plus shipping. Lower 48 only.

I will try to post a photo or two when I figure out how.

Hello All,

How are you torquing the #2 action screw? It looks to me that you'd have to use a ball end bit but, wouldn't that make the torque required to meet the spec higher?

Saying it another way, do ball end hex bits apply the same force to the screw for a given torque setting on the wrench as a regular bit?

Thanks for the replies!

Anyone else start getting hammered the last week or 2?

It’s like the Indians found another abandoned call center. But these sound like Mexicans and other associated turds.

If you have a business you have to answer your calls. These spammers need a spot on the gallows next to thieves

Another case of timmy trying to steal more military credits? Also, his despicable behavior with the widow of a slain officer. My hat's off to her for letting timmy have it.
Login to view embedded media