Vudoo v22 360 with 18” threaded barrel
40 moa rail
1 aluminum 10 round mag
1 poly 10 round mag
I have a trigger tech diamond I can include for $220 and the foundation mg2 I had it in with Hawkins bottom metal and weights for $1100
Barreled action and both mags $1550 shipped FFL to ffl
No trades
I can only accept Zelle cash app usps mo or cert check nothing else

For sale is a MK5 with illuminated TMR reticle. It is the newer version of the reticle that has the center aiming dot. Will come with the FDE Badger C1 mount. Asking for $2k shipped

LMW MWS 15.3" railed with a new chrome lined 16" 1:10 twist .308 barrel. . The barrel is brand new/unfired. BCG is a LMT (solgw marked for aesthetics).

It is rapco coated in field drab



Triggertech single stage match trigger was installed and the charging handle swapped to a radian

$2800 shipped

This is new unfired. It has the metal lower and elftman trigger and the 8.9” barrel. Also has the $550 B&t pistol brace and a new Aimpoint duty rds. These run about $2,500 plus the brace and Aimpoint about $3,500. I would do $2,100 face to face or $2,120 shipped to your FFL

I've got a gen 2 single pull Ckyepod with arca for sale. The only signs of wear are on the grip tape as seen in the pictures. This bipod will come with B&T Atlas feet - both rubber and single spikes. $450 shipped and insured by me.

Very nice factory Colt M16A1 fully transferable on a form 4 in Oklahoma. Only small trade of interest would be a shorter 308 bolt gun with carbon fiber barrel.
$42,500

Sorry to say but the election is over.Allan Lichtman has predicted Harris will win and he has been right 9 of the last 10 times with the exception of 2016. LOL

Zermatt RimX action.


Mueller Works 1:13 22" barrel chambered by Permian Precision Rifles.


Triggertech Diamond 1 stage.


Aero Precision Solus 17" Competition chassis.


2 RimX mags


1 Mag block.


Hard Case.


Can sell bipod and scope for extra $.
No Trades.
$2400

Selling a $600 off vudoo barreled action cert. Expires end of this year.

Asking $250

Chris

I've been running the Tract Toric 15x56 Binos for awhile now....use to own the Meopta Meostar B1 HD 15x56s and loved them....while the Tract Torics are pretty nice I am ready to step back up the the Alpha Binos and am looking at the 15x56 Swaro SLCs and the 15x56 Meopta B1s.

So are the Swaro SLC 15x56 still the hands down best glass? Has anyone done a side by side with the SLCs and the B1s? Do the SLCs honestly see $600 better than the B1's? Low light is not a huge concern as I am not a hunter and these will be used for spotting matches.
I know the Meoptas as I said I use to own a pair so I guess I am asking more about the Swaros.

Thanks Dave

Quick question, if you're at max powder charge, and the velocity isn't what you were hoping for (given all else is good, throat, bore, etc etc) do you try a faster or slower powder to boost velocity? (25" barrel .308 168gr)

My budget is $1100 for this 6 mm ARC rifle. I want a threaded 22 inch or longer barrel with a diameter of at least .740 just before the threads, a 3 lug action with a 70 degree or less bolt lift, an adjustable trigger no more than 3.5 lbs and a decent stock. I have looked at Howa BA and Brownell tells me the 22 inch bbl measures .574. Also Howa's action is 90 degrees. Aero precision Solus bolt is not as yet made to fit .441 inch case head. Ruger American Gen ii has a 22 inch bbl predator model that meets most of my requirements except for the stock. KRG makes a special Bravo for the Ruger with AI mags. Boyd makes an AI Ruger kit with bottom metal in aluminum for at least one of the thumbhole stocks. If any one has experience with that conversion please give me a heads up.
any has hands on experience with that set up I would appreciate a reply. If any has knowledge and experience with any other barreled actions or rifles that might work for me I would appreciate a reply. Thank you for any response.

I just acquired a Kelbly Nanook action and am looking for advice on a first-time rifle build. I want to build a 6mm creedmoor. I know the nanook is technically a hunting action but I'm not too concerned with the rifle being super light-weight. I got a good deal on the action so I ended up taking it.

I've never put together a rifle before. 90% of my shooting is going to be off of a bench. I have a 500 yard range close to me and want to do some plinking. I also wouldn't mind being able to take it to a bench rest shoot or lay in a field with it and hunt groundhogs. Does anyone have advice on barrel contour, twist, stock/chassis, trigger?

I am thinking a heavy varmint barrel in a 1-7.5 twist. Any reputable companies with a decent lead time right now that I could order it already chambered? Bugholes?

I am not sure on a stock/chassis. Maybe a mcmillan A5?

If anyone has any recommendations it would be greatly appreciated.

Thanks,

Hi Gang,

So I finally got a backup 700 .308 backup setup blueprinted and it came back DOA and would not fire. It was all new parts and never fired. I have been sitting on the setup until I had the $$$ to get it set up properly and trued. The smith said they fired several rounds through it and it fired no issues. I have another 5R and zero issues with my loads and standard loads. My main go to is Federal Gold Match SMK 168G. I picked up a MDT TIMBR chassis and bedded and set everything and took to the range with first pull was no fire, which repeated 4-6 attempts. So I was scratching my head, and a bit upset, so I sent it back and they said that it fired at their shop when it left and again when I sent it back with no issues. I received it back and today got to go to the range, same issue.

As I have been racking my brain in sequence from part to part, I decided to use my bore cam and here is what I found. Is the general consensus that the bead of solder in the bottom of the bolt is the reason why the firing pin could have never fully seated to get the proper depth to strike the primer.

Looking or a second, third, forth or fifth opinion.

I appreciate the feedback, gang.

I have a new unfired Sako TRG 22A1 in a 308 caliber 11 twist with a 26 inch barrel. I bought this off the original owner a while back and it is still new unfired. Comes with the accessories in the picture that came with the rifle and a 10rd magazine. They are factory parts that come with the rifle. The only marks on the rifle are from when the original owner mounted a scope on it and they are on the picatinny rail. Color of the folding chassis is Tungsten gray. Moved a while back out of state and have no need for it where I am at.

4200.00 plus 50.00 for shipping to your FFL from private owner. It will be shipped in a plastic gun case with outer cardboard sleeve. Great deal for what they cost on a new rifle with no tax.

Listed elsewhere and not looking for any trades.

I knew you would click this....

Login to view embedded media

So we all know it has been “law” that FP lasers have been limited to mil and LEO sales by the FDA. Chevron deference is what allowed the FDA to come up with BS “laws” like that. USSC tossed chevron deference to the curb thanks to a bunch of fisherman. This renders the FDAs “law” regulating sales of FP lasers completely irrelevant. Congress never passed that law, therefore it is now unenforceable.

When are NV vendors finally going to be willing to sell FP units to the citizenry? Or are we all gonna continue to play nice under the boot of unelected bureaucrats just because we like the taste?

I ran across some rounds I'd loaded with IMR 4895 and Lapua scenar 155's and they shot incredibly flat - like 8 mils to 900 yards flat out of an 18" bbl AR. Has anyone else done this? Did this wear your barrel out faster than the standard 168/175 loaded like factory? I did not see any pressure signs.

Is this a fool's errand? If I'm looking for flatter should I just go with a 6.5 CM?

Final question: has anyone used the sierra 155's in this role? Asking because they're half the price of the scenar(s).

Thanks

Looking to make a purchase on some new Binos.

Use case - Western hunting (deer & elk) and also precision rifle matches.

I’m not sure if I should go 12x or 15x.

At this point in life my budget is $500ish. Possible a little wiggle room with that but not a ton.

Open to brand and model suggestions as well. Thank you.

Sluiced from Accurate Shooter:

Here in Arkansas.

I’ll start.

I once lubed my pistols and rifles with Sesame Seed Oil.

Made the place smell like Chinese take - out



EDIT: I once thought Peanut Oil was best due to its thermal properties, but looks like there are other options

And while you are doing it, think about how things on line, all forums, and most everywhere else is either monitored, controlled, logged or nudged, to foster favor to the protected class. Any information that would give you an edge in protecting yourself from same, is rapidly removed. So this begs the question why support that breed?

$325 Shipped

In good used condition. Bag measures is 51” long and holds up to a 49” rifle comfortably. Comes with all Velcro straps and sling originally provided.

$115 shipped
PP F&F